BeoCenter 2 Guide – Socket Unit
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No User-serviceable parts inside. Refer servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment.
Contents Placing your music system, 4 Find out how to place your BeoCenter 2 and the Socket unit. Connect the cables, 6 Find out how to connect all cables to the Socket unit. Mounting the wall bracket, 8 Find out how to mount the optional wall bracket for the Socket unit. Audio/Video system, 10 Find out how set up your products to the correct option and operate different Audio/Video systems. Looking after your music system, 12 Find out how to clean your system and your discs.
Placing your music system 4 Make sure that the music system is set up, placed and connected in accordance with the instructions in this guide.
1 You can fasten the Socket unit either horisontally or vertically. Note that the lock mechanism of the wall bracket requires that the sockets face downward if you mount the Socket unit horisontally. 2 Cover for sockets: To gain access to the sockets, it is necessary to remove the cover. Lift one end of the cover, slide the cover to the side and lift it off. The cables must be lead through the openings at each end of the Socket unit. Mains lead: For security reasons the cover must be mounted.
Connect the cables 6 Use the diagram and graphics imprinted on the Socket unit when locating the sockets. Note that the greyed out sockets are only present if your BeoCenter 2 is equipped with DVD. Do not connect your system to the mains until you have finished connecting all other cables. To access the sockets in the Socket unit, you must remove the cover – refer to page 5 and the graphics imprinted on the cover.
Aerial connections – AM/FM/DAB We recommend that you connect your DAB aerial before connecting your other aerials. DAB radio programs are only available if your music system is equipped with the built-in DAB module. Loudspeaker connections – Power Link Connect your active speakers to the socket marked Power Link and loop the signal through from speaker to speaker. Refer to the Guides for the BeoLab Loudspeakers.
Mounting the wall bracket 8 The Socket Unit can be mounted on the enclosed wall bracket in either a horisontal or vertical position. We recommend that you follow this procedure when you mount the wall bracket: 27 cm 10.6" 20 cm 8" 17.5 cm 6.9" 27 cm 10.6" 17.5 cm 6.9" 10 cm 3.9" – Use the wall bracket to mark the placement of the holes to be drilled in the wall.
Removing the Socket unit from the wall bracket: To ensure that the Socket unit is placed securely on the wall bracket, the wall bracket has two lock mechanisms (A) which must be released before the unit can be removed. 2 A Push the two clips in towards the wall and lift the unit out of the bracket.
Audio/Video system 10 You can use your music system as a stand-alone system or as an Audio/ Video system, if you connect the systems with a Master Link cable. If you connect your music system and your video system, you must make sure that they are set up to function together. This means that you have set it to the correct Option with Beo4 as described on this page.
Audio and Video system in one room If your BeoCenter 2 is set up with its own speakers and connected to a television (Option 1–1), you can listen to the radio while watching a DVD. However, all close-up operation is directed at the radio. DVD operation with Beo4 is directed through the television.
Looking after your music system 12 Normal maintenance, such as cleaning the music system, is the responsibility of the user. To achieve the best result, please follow these instructions. Handle discs with care. If the disc is always held by its edges and placed in its original cassette when out of the player, no cleaning will be required. Cleaning your music system Wipe dust off the surface of the system using a dry, soft cloth.
Index 13 Audio/Video system DAB radio programs Connect your music system to a video system, 6 Option programming, 10 Use an Audio/Video system, 11 Adjust DAB audio signal compression – DAB DRC, BeoCenter 2 Guide p. 10 Adjust your DAB aerial, BeoCenter 2 Guide p. 11 DAB aerial socket, 6 Tune in DAB radio programs, BeoCenter 2 Guide pp. 10–11 Beo4 remote control Use the Beo4 remote control, BeoCenter 2 Guide p. 22 Delete Cables Delete CD names, BeoCenter 2 Guide p.
>> Index Maintenance Placement Tracks Looking after your music system, 12 Placing your music system, 4 Master Link Radio Play favourite tracks only, BeoCenter 2 Guide p. 12 Play tracks in random order, BeoCenter 2 Guide p. 12 Audio/Video setup, 10 Option programming, 10 Use an Audio/Video system, 11 Delete radio programs, BeoCenter 2 Guide p. 10 Move radio programs, BeoCenter 2 Guide p. 10 Name radio programs, BeoCenter 2 Guide p. 10 Switch on the radio, BeoCenter 2 Guide p.
This product fulfils the conditions stated in the Directives 89/336/EEC and 73/23/EEC.
www.bang-olufsen.