User Manual BandLuxe P530 Series LTE/HSPA+/GPRS WLAN Mobile Router
Introduction Thank you for your purchase of the P530 Series LTE/HSPA+/GPRS WiFi Mobile Router. This device is designed to access the Internet via 4G technology and share the Internet through a WLAN network. You can also share files with your friends with an optional microSD card. P530 is portable and easy to use. Reading the user manual will help you make the most use of your product.
Getting Started Getting Started This chapter will provide a hardware overview of the P530 Series LTE/HSPA+/GPRS WLAN Pocket Router step by step instructions on installing the device. Package Contents 1. 2. 1. 3. 4. P530 series LTE/HSPA+/GPRS WLAN Pocket Router Power Adapter Battery USB cable Installation 1. Remove the back cover of the device. 2. Insert the SIM card into the slot. Ensure the SIM card orientation matches the SIM card slot. 3.
Getting Started 4G connectivity. The USB port may not provide sufficient charge to replenish battery power. To charge the battery, use the power adapter to connect the device to a wall outlet. 7. Link the router to your PC. To link the router to your PC via a wireless connection, in Microsoft Windows, go to Control Panel > Network Connections. Right click on the Wireless Network Connection and choose View Available Wireless Networks.
Getting Started Basic Functions Powering On and Off To power the P530 on, slide the device up to the ON position. When the P530 is powered on, the LEDs start blinking (approximately 16 secs). Enabling WPS WPS is a standard designed to easily setup and automatically configure secure WLAN networks between two WPS supported devices. If the client PC supports WPS, the WPS feature can be a user-friendly and simple process to get your WLAN network up and running. 1. Enable WLAN. 2.
P530 Series Management P530 Series Management Accessing the Device P530 WLAN Router uses the web-based interface for managing and configuring wireless network settings. To access the interface, open a browser such as Internet Explorer and enter the router’s default IP in the browser’s address bar. Use the appropriate IP depending on the connection method. Connection method Default IP USB 192.168.21.1 WLAN 192.168.100.
P530 Series Management Basic Setup SSID Network name of your WLAN network. It is case sensitive and can not exceed 14 characters. Default name is printed on the network information card. Encryption Type Method of encryption used when transferring data through the airwaves from the router to the client PC or vice versa. The PR-30 WLAN Router supports 3 encryption types - WEP, WPA, and WPA+WPA2. WPA is a WLAN standard that was designed to improve the security features of WEP.
P530 Series Management Specifications Note: Specifications are subject to change without notice. Physical WLAN Cellular modem Dimension (LxWxH, mm) Weight (g) 802.11 b/g/n with 1x1 antenna design (no diversity). Coverage : 10m Embedded, GPRS/EDGE/WCDMA/HSPA/HSPA+/LTE L 74.17 x W 52.41 x H 24.
P530 Series Management Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
