The Stelera C105 User Manual
Contents Chapter 1 Getting Started 3 Chapter 2 Connecting 8 Chapter 3 Settings 11 Chapter 4 Statistics & Information 13 Chapter 5 Q&A Chapter 6 Important Safety Information and Glossary 18 155
The Stelera C105 Chapter 1 Getting Started
Chapter 1 What’s in the box 1. Stelera C105: Insert this into an ExpressCard Slot if available. Before You Install Information Before installing the C105, we recommend obtaining the following information from the SIM Card Mobile network operator: Access Point Name (APN) - For many carriers, the APN may simply be Internet. Phone Number - The Phone Number to dial to establish a network connection. Stelera software helps input this number correctly. Insert SIM Card 2.
Chapter 1 PCMCIA Adaptor 1. Slide the C105 into the PCMCIA Adaptor (LED & Gold Strip Up, SIM Card Side Down) as far as possible. Software Installation The process and appearance of certain software elements in Windows Vista will be somewhat different than in 2000/XP. These differences are minor and should not limit the functionality of the C105 in any way. New Hardware Detection Windows 2000/XP Once the C105 is connected, a dialog box should pop-up from the Toolbar Hardware Connection Icon.
Chapter 1 InstallShield Wizard Preparation Select Installation Folder The C105 will automatically use the appropriate language for your OS, if available. Click Change to manually select a folder. Welcome Change Current Destination Folder The Setup Wizard window opens automatically. The first page contains OS compatibility and legal disclaimers. Click Next to continue. Highlight the folder and click OK to select it. Click Cancel to close the Browse window.
Chapter 1 Install to begin installation. Installation Complete Installation Installation time will vary, depending on the computer. Home Screen 1. Signal Strength 2. Minimize 3. Radio Technology 4. Mobile Network Operator 5. Connection Status 6. Connection Time Elapse 7. Total Data Uploaded 8. Total Data Downloaded 9. Compose Message 10. Radio On/Off 11. Menu 12. Home Screen 13. Connect/Disconnect Note: The Home screen only indicates 3G (internet) connection status.
The Stelera C105 Chapter 2 Connecting
Chapter 2 Establishing a Connection With the C105 fully installed, an online connection can now be made. The C105 will automatically scan your system and create a default profile, which should work in the vast majority of cases. To test it, simply click the Connect button. Connection should take about 5 seconds. When established, the Home screen should say Connected, with the onscreen clock running will and the Download/Upload tallies running.
Chapter 2 3. Click OK on the confirmation window if this is the desired profile. General Connect using If other modems are available, they will be listed here. Click Configure to adjust the Stelera modem settings. Phone number 4. The word YES will appear next to the default profile. Check Use dialing rules to access the Location Information window to add more specific dialing information such as tone/pulse dialing, current region, area & carrier code, and outside line access number.
The Stelera C105 Chapter 3 Settings
Chapter 3 General Check Auto connect on startup to have the C105 connect to the internet automatically during startup. If speed is essential, clicking Quick startup will cause the auto startup to proceed even faster. However, if you plan to install the C105 onto multiple computers, disable the Quick startup function. Do not have the C105 connected to the computer when you turn it on when Quick startup is enabled.
The Stelera C105 Chapter 4 Statistics & Information
Chapter 4 Statistics Signal The Statistics screen displays a graph of recent upload and download activity. If there is no data, the C105 is offline. Click Menu > Statistics. Click the Signal tab to see signal data. The bottom half of the screen will be empty when there is no connection or during a 2G connection. Displayed indicators will vary, depending on your protocol.
The Stelera C105 Chapter 5 Q&A
Chapter 5 Q: I am trying to install the C105 onto another computer, but the software installation window is not opening, nor is there an icon in My Computer, what do I do? A: Quick startup has already been enabled on a different computer. Reconnect the C105 to that computer and disable this function. There are two ways to do this. 1. Click Menu > Setting > General tab. Uncheck Quick startup and click Save. See Chapter 4 for more information. 2. This method varies depending on the OS.
Chapter 5 Q:Can I use the Connection Manager on an airplane? A: Yes, you can simply unplug the C105. This will allow you to compose messages, adjust most settings, or perform other Connection Manager functions. However, removing the SIM card, while keeping the C105 plugged in, is not the same as unplugging it. Removing the SIM card will cause the Connection Manager software to close after a few moments. You may also keep the C105 plugged in, but in Flight Mode.
The Stelera C105 Chapter 6 Important Safety Information and Glossary
Chapter 6 Safety Information Regulations Important Notice CE Marking Due to the transmission and reception properties of cellular communications, data can occasionally be lost or delayed. This can be due to the variation in radio signal strength that results from changes in the characteristics of the radio transmission path. This device has been tested to and conforms to the regulatory requirements of the European Union and has attained CE Marking.
Chapter 6 FCC RF Radiation Exposure Statement: 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Guidelines when used either in the normal use position against the ear or when positioned at least 1.
