User Manual BandLuxe K530 Series LTE M2M & Vehicle Mount Router
Table of Contents Package Contents .......................................................................... 2 Features .................................................................................................................. 2 Hardware Overview................................................................................................. 3 Connection ...................................................................................... 5 Appendix B: Specifications .............................
Package Contents Package Contents Thank you for your purchase of this LTE M2M & Vehicle Mount Router. This product is designed to access the Internet via 4G technology and share the bandwidth through a Wi-Fi network. It is easy to configure and operate even for non-technical users. This manual contains instructions for installing and configuring the product. Read the manual carefully before you use the product, so that you can fully exploit the product functions.
Package Contents Hardware Overview 3 1 4G External 5 Antenna Ports Connect 4G External Antennas. 2 WiFi External 4 Antenna Ports Connect WiFi External Antennas 3 GPS External Antenna Port This connects a GPS antenna to the device. 6 Reset Switch Restore to factory default settings. 7 Power Port This connects power to the device. 8 SIM Card Slot Embedded SIM as default, also 1 x SIM (SIM/USIM) slot for external plug in for back up.
Package Contents 11 LED indicators 4 These show the device’s operating status. 11-1 GPS LED (Blue) GPS on 11-2 LAN1 LED (Blue) LAN port 1 transmiting. 11-3 Signal Strength LED (Blue) Good (Green) Normal (Red) Bad 11-4 WiFi LED (Blue) WiFi on 11-5 LAN2 LED (Blue) LAN port 2 transmiting.
Connection Connection 1. Insert your SIM card into the slot on the router, making sure the SIM card orientation matches the SIM card slot, as shown in the picture. 2. Connect the power adaptor to the router and connect it to an outlet. 3. One of the following two methods can be chosen to link your PC with the Router. Wireless Connection(for Windows) To connect your PC to the Router via WiFi, in Microsoft Windows, go to Control Panel > Network Connections.
Appendix B: Specifications Appendix B: Specifications Note: Specifications are subject to change without notice. WLAN 802.
Appendix B: Specifications Other features SSID broadcast disable, Dual SSID, Access control (MAC filtering), WLAN on/off software switch.
Appendix B: Specifications Appendix C: Important Safety Information and Glossary Federal Communications Commission NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operate din a commercial environment.