User Manual

Table Of Contents

Operation Manual

RFID Reader “IDE-BRICK-LA2-ETH”

REVISION 1.0, 2016-02-04

BALTECH AG

Lilienthalstraße 27

85399 Hallbergmoos

Germany

Phone: +49 (811) 99 88 1- 0

FAX: +49 (811) 99 88 1- 11

e-mail: info@baltech.de

http://www.baltech.de/

PAGE 1
Operation Manual RFID Reader “IDE-BRICK-LA2-ETH” REVISION 1.0, 2016-02-04 Confidential information, all rights reserved. BALTECH AG Lilienthalstraße 27 85399 Hallbergmoos Germany Phone: +49 (811) 99 88 1- 0 FAX: +49 (811) 99 88 1- 11 e-mail: info@baltech.de http://www.baltech.
PAGE 2
M/N : 10096-1 A/N : 10096-107 -1-
PAGE 3
Introduction The “10096-107” Reader/Writer is a Desktop contactless smart card/tag reader and writer. It supports LEGIC RF standards, ISO 14443A/B, ISO 15693, FeliCa tags. The reader provides 13.56 MHz inductive interface to supply power in order to exchange data with the MIFARE/ISO, LEGIC compliant cards and interfacing with the host PC via Ethernet for data exchange. Based on BALTECH’s core technology it provides support of the latest smartcard technologies, encryption and security features.
PAGE 4
Technical Features Parameters Descriptions Operated Frequencies 13.56MHz RF-Characteristics Data transmission ASK modulation reader to card: Data transmission AM/Load modulation modulation card to reader: Host Ethernet Supported standards: LEGIC, ISO 14443A/B, ISO 15693, FeliCa Interfaces Contactless Communication speed: Baud rate up to 424kBaud Reading distance : Up to 9 cm- depending on tags and antenna Human Power Supply [VDC] Consumption [W] Temperature Humidity LEDs, Buzzer PoE (IEEE 802.