// MANUAL Instruction Space Gray SF-TB-10 All Black SF-TB-20 24 K Gold Plated SF-TB-30 WIRELESS PHONE CHARGER - FA S T C H A R G E CA PA B L E -
// TABLE OF CONTENT EN Disclaimer and safety guidelines 1
// SPECIFICATIONS 3.54” (90 mm) HEIGHT 6.49” (165 mm) DEPTH 0.66” (17 mm) WEIGHT 10 ounces (300 g) - Al. 26 ounces (737 g) - Br. MATERIALS Walnut Wood Aluminium/Brass OUTPUT 5W Mode 7.5W Mode 10W Mode - Fast Charge 15W Mode - Fast Charge INPUT DC 12V, 1.5A FREQUENCY RANGE 110-205 kHz OPERATING CONDITIONS Operate the device at 0 to 35 degrees Celcius at max. 85% relative humidity.
// INSTRUCTIONS EN Important! Read carefully before use. Store for future reference. 1. PLACEMENT Place THE BRICK on a level ground. 2. CONNECT Plug in the supplied cable. 3. CONNECT Plug in the cable into a QC 3.0 USB-A port. 4. CHARGE Simply place the center of your qi-compatible device on the center of THE BRICK.
EN // NOTICE Place the smartphone with the back side on THE BRICK. Place the qi-compatible device E BRICK. on the center of THR Ensure a level ground and that the device does not slip. All metal or magnetic objects must be removed from the back of the smartphone. Keep THE BRICK dry. Don‘t expose to liquids. Clean only with a damp cloth.
// ATTENTION EN Avoid extreme Temperatures. Do not disassemble or open THE BRICK. Modifying THE BRICK is not allowed. For the sake of the environment, THE BRICK must be disposed separately. Do not drop THE BRICK. Should THE BRICK be damaged, stop using it.
Do not attempt to charge a device with a damaged, broken, or open battery compartment Do not attempt to charge a device that is incompatible with Qi charging technology.
// SAFETY GUIDELINES WARNING EN 1. Dry conditions only – use this wireless charger only indoors. 2. Should the wireless charger or the device that is being charged get hot, stop use immediately and contact manufacturer. 3. 4. Make sure your voltage is appropriate for the included power supply. Use the wireless charger only in the allowed environment and temperature range found under operation conditions. 5. 6. 7. 8. 9. The wireless charger is not a toy and not designed to be played by children.
EN // FCC STATEMENT Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
// FCC STATEMENT EN This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
