Operating Guide

ManualsBrandsBalluff ManualsElectronicsRFID Read-/Write Head

BF-IDU08

RFID-Reader

Company Addresses

Europe, Germany, Headquarter

Balluff GmbH

Schurwaldstraße 9

D-73765 Neuhausen a.d.F.

Argentina

Balluff Argentina S.R.L.

Av del Libertador 650 Piso 7 Sur

B1638BES - Vicente Lopez, Buenos Aires

Australia

Balluff Pty Ltd.

18 Malvern Street

Bayswater, 3153 Victoria

Brasil

Balluff Controles Elétricos Ltda.

Rua Francisco Foga, 25 ,Distrito Industrial

CEP 13280.000 – Vinhedo – SP

Canada

Balluff Canada Inc.

2840 Argentia Road, Unit 1 Mississauga,

Ontario L5N 8G4

China

Balluff (Shanghai) Trading Co. Ltd.

No.800 Chengshan Rd, 8F, Building A, Yunding International Commercial Plaza

200125, Pudong, Shanghai

Japan

Balluff Co., Ltd.

Aqua Hakusan Bldg. 9F 1-13-7 Hakusan, Bunkyo-ku,

Tokyo 113-0001

Mexico

Balluff de México S.A. de C.V.

Anillo Vial II Fray Junipero Serra No. 4416; Colonia La Vista Residencial

CP 76232 Delegación Epigmenio González, Querétaro

USA

Balluff Inc.

8125 Holton Drive, Florence

Kentucky 41042-0937

Summary of content (5 pages)

PAGE 1
BF-IDU08 RFID-Reader Company Addresses Europe, Germany, Headquarter Balluff GmbH Schurwaldstraße 9 D-73765 Neuhausen a.d.F. Argentina Balluff Argentina S.R.L. Av del Libertador 650 Piso 7 Sur B1638BES - Vicente Lopez, Buenos Aires Australia Balluff Pty Ltd. 18 Malvern Street Bayswater, 3153 Victoria Brasil Balluff Controles Elétricos Ltda. Rua Francisco Foga, 25 ,Distrito Industrial CEP 13280.000 – Vinhedo – SP Canada Balluff Canada Inc.
PAGE 2
BF-IDU08 RFID-Reader Operating Guide Purpose of the Device The BF-IDU08 device is intended to read and write "EPC Global Class 1 Gen2" compliant data carriers (so called tags) via country dependent UHF radio frequencies. Check that you have the right device variant This UHF system consists of a radio frequency unit and an integrated antenna according to specifications and may only be operated within the specified countries subject to all applicable national legal regulations and standards.
PAGE 3
BF-IDU08 RFID-Reader Connecting the Device The BF-IDU08 device has to be connected to one of the IO-Link-Device ports of an IO-LinkMaster unit via standard 4-wire cable with M12 industry connectors (A-coded). The IO-LinkMaster unit provides power supply and controls the device over its IO-Link interface connection. Figure 1: System overview The IO-Link-Master unit itself needs to be connected to a power supply and the customer's PLC unit.
PAGE 4
BF-IDU08 RFID-Reader Figure 2: BF-IDU08 mounted on metal carrier using 2 x Nut M30 The antennas of the identification system BIS U transmit ultra-high frequency electromagnetic waves. People should not remain within the near enclosure of the UHF antenna over long time periods (several hours). The mounting position of the BF-IDU08 should take respect to a clearance area of about 25cm to workplaces.
PAGE 5
BF-IDU08 RFID-Reader Setup and Operation The BF-IDU08 device will operate when connected to an IO-Link-Master that provides power supply and implements the BF-IDU08 RFID-Reader protocol. Device behavior e.g. transmission power or operating modes can be setup via different parameters. Protocol description and available parameters are described in the firmware configuration manual. Status Indicators The device will show its status using RGB LEDs located at the M12 plug.