Data Sheet

Model:
BF-IDU05 Data Sheet
RFID Reader
Page 1 of 3
Operational Description
This device is a RFID reader operating at 902 .. 928 MHz to read and write RFID tags
according to ISO18000-63 / EPC Global Gen2 standard in industrial environment.
The device is intended to operate in combination with a controller which allows connection to
control devices with standard industrial bus protocols.
The device is powered by 24 V limited power supply of the mentioned controller and
communicates with this controller via RS-232.
Electrical Data
Operating voltage V
s
21.6 .. 26.4 V DC
Current draw (at 24 V DC)
≤ 400 mA
Operating Frequency
902 .. 928 MHz
Operating channels (in MHz)
902.75 903.25 903.75 904.25 904.75 905.25 905.75
906.25 906.75 907.25 907.75 908.25 908.75 909.25
909.75 910.25 910.75 911.25 911.75 912.25 912.75
913.25 913.75 914.25 914.75 915.25 915.75 916.25
916.75 917.25 917.75 918.25 918.75 919.25 919.75
920.25 920.75 921.25 921.75 922.25 922.75 923.25
923.75 924.25 924.75 925.25 925.75 926.25 926.75
927.25
Maximum Transmit Power
36 dBm (4 W) EIRP
1
Maximum Port Power
30 dBm
2
Mechanical Data
Housing material: Aluminium, anodized
Weight: 850 g
Ambient temperature range: -20°C ... +55°C
Device size: Length x Width x Height = 188 mm x 105 mm x 57 mm
1
Maximum Transmit Power is ensured by the software UHF Manager by consideration of cable loss
and antenna gain. The UHF Manager is used to adjust the RFID reader through the mentioned
controller.
2
Maximum Port Power is also limited by the software UHF Manager.