User Manual iPad keyboard case For more support please email us at Baislastore@hotmail.
How to pair your iPad? 1.Upgrade your iPad Software Version to 13.2.2 or above first so that you can fully access to the touchpad function. 2.Press the power button for 3 sec to turn on the ipad keyboard( indicators will flash once and keyboard backlight will turn on and it will automatically turn off). 3.Press pair button for 3 sec, blue indicator will flash which shows the keyboard is on pairing mode. 4.Turn on your iPad Bluetooth, and search the“ipad keyboard.”on list, then tap it for connection. 5.
How to control trackpad? Be sure that touchpad can be used on your iPad, you need to complete below steps: Open your Generation Setting-Go to Accessibility-Go to Touch, under the Physical and Motor section, turn on the AssistiveTouch toggle. And you can adjust the cursor speed by open iPad Setting - Go to Accessibility - Go to Touch - Go to AssistiveTouch - Choose the Mouse Key to adjust the tracking speed. By the way, make sure your iPad Software Version is on 13.2.2 or above.
NOTICE: 1.Backlight will automatically turn off if there is no movement on keyboard for 5 sec, while it will light up again when you press any key. 2.Blue backlight will turn on when you turn on the ipad keyboard, and it will turn off automatically within 1 min. It’ s a normal situation. Don’t worry about that. VERY INPORTANT: Keyboard will be in sleep mode if it doesn’t work over 10 min. Being sleep mode, it will cut the connection between your iPad.
FAQ 1.Keyboard can’t connect with your iPad. Please click“forget this device”to delete all the devices on your iPad Bluetooth list, then restart your iPad bluetooth and keyboard. Connect them again. Above steps can’t succeed, pls press“L” ”Z” ”S”together for 3 sec, led lights will flash, then restart your iPad bluetooth and keyboard. Connect them again. If the problem is still alive, pls contact seller. 2.Touchpad doesn’t work. Make sure your iPad software Version is 13.2.2 or above.