Smart Power Strip with High Speed USB Charging Model No.
Warnings: To reduce the risk of fire, electric shock or personal injury, always follow the instructions strictly. 1. The Smart Power Power is only for indoor use. 2. Do not connect any devices which may exceed the maximum ratings of this power adapter. 3. Children are not allowed to use the power strip without adult supervision 4. Do not disassemble or repair the product, and only allow authorized service personnel to do so. 5.
Software Installation Guide Download the “smart life ”App: Scan QR Code or search “Smart Life” in Google Play or the App Store to download and install the app. Register an account If you don’t have an app account ,register an account as following steps: 1.Open the app and tap “Register” to enter the registration page. 2.The system automatically recognizes your country/area. You can also select your country code. Enter the mobile number or E-mail and tap “ Get Verification Code.” 3.
Note: Each device can only be connected to one account. If anyone else needs to control it, please share your device via the app. Add device 1. Plug the smart power strip into an outlet. 2. Launch the "Smart Life" app and connect the smart power strip to your network. Note: The smart power strip only support 2.4GHz network. 1) Short press the power button on the smart power strip, the blue LED power indicator will ON/OFF correspondingly.
For Optimal Use: 1) If the indicator on smart power strip doesn't flashing when you plug into the power socket for first connection, please hold and press the power button which on the bottom of the power strip for about 5-10 seconds to see if it's start flashing; 2) If the smart device can't be connected to Wi-Fi, please long press the power button for 5-10 seconds to reset the smart power strip; 3) The smart device only work with 2.4 GHz network. If your router broadcasts both 2.
3) The smart power strip added successfully and is ready for use, Then tap 【Next】.
1) Countdown: Device is turned on or off after countdown time. Figure 10 Figure 11 2) Schedule: Device is turned on or off on any individual day or blocks of days. Figure 12 Figure 13 Figure 14 3) Circulate: Device is turned on(start duration) and off(end duration) repeatedly from start time to end time.
Figure 15 Figure 16 4) Random: If the time interval between start time and end time is more than or equal to 1 hour, start time is delayed 2-30 minutes and end time is advanced 2-30 minutes. If the time interval is less than 1 hour, start time is delayed 2-x minutes and end time is advanced 2-x minutes.(x=time interval/2-2). For example: you set start time at 8:00 and end time at 8:30. The device is turned on at random time between 8:02 and 8:13.
Setting Relay status (ON/OFF status for the device): Select “OFF” mode for the relay status, the device will remain OFF mode after a power outage, even when the power comes on again.
Work with Amazon Alexa Link Smart Life account to Alexa 1. 2. Open your Alexa app, tap “ Skills” in the menu, and then search “ Smart Life” Select “Smart Life” and tap “ Enable” to enable the Smart Life skills. You will be directed to the account link page. Type in your “Smart Life” account and password, don’t forget to select your country/region where your account belongs to. And then tap “Link Now ” to link your Smart Life account.
Other functions: Figure 22 Specifications - Operating Voltage: 125V~/60Hz - Max. Connected load: 15A / 1875W (Resistive ) - Cord Type: 14AWG - Cord Length: 3 - 6 feet - USB Charging: Total 5V 4.5A Max; Single 5V 2.4A Max - Wireless Type: 2.4GHz IEEE 802.11 b/g/n Troubleshooting and FAQ 1. What should I do when can not turn the smart power strip on or off? Make sure your mobile devices and the smart power strip are connected to the same Wi-Fi network.
Make sure the devices connected to the smart power strip are turned on. 2. What should I do when device configuration process has failed? You could: 1) Check whether the smart device is powered on or not. 2) Check whether your mobile device is connected to 2.4GHz Wi-Fi network. 3)Check for Wi-Fi interference or relocate the smart device to another location. 4)Check your network connectivity. Make sure the router is working properly. 5) If the router is dual-band router, select 2.
How can operate if only by Bluetooth for the WiFi and Bluetooth dual mode modules? The steps of only Bluetooth control are as follows: 1. Make sure that the Bluetooth has been turned on, and the Bluetooth network distribution mode is used when the smart power strip device is connected to the network; 2.
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
