Video Baby Monitor By User Manual Wireless Digital Video Baby Monitor Watch, Listen and Talk to Your Baby Model: V24R For any product related question please contact us at service@hisense.co.il or Toll Free Number (833) 568-2229 www.babysensellc.
1. Warnings and Safety Instructions Follow these safety precautions to prevent fire, injury or damage to the product. Read and keep instructions: It is very important that you read all the safety and operating instructions before the Babysense video monitor is operated. Please retain your purchase receipt as you will need to produce it if warranty service is required.
1.1 Safety Instructions for AC Power Adapter • The adapter should not be exposed to direct heat sources such as a candle, stove, radiator, heat register or other appliance that emits heat. • During continual use, the power adapters may become warm to the touch. This is normal and should not be a concern. • Examine intactness of the power cord and its plug. • The adapter must be handled with care: Do not handle roughly, drop or throw.
FCC STATEMENTS: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
2. Pack Contents • • • • • • Parent Unit x 1; Baby Unit x 1; AC Power Adapter x 2; Li-ion Battery (Pre-installed in Parent Unit) x 1; User Manual x 1; Set for wall mounting x 1 3. Product Overview 3.1 Parent Unit overview 2 4 3 14 7 1 11 13 8 12 5 15 6 16 9 10 1. Power ON/OFF / SLEEP Bu�on 2. Charging LED 3. Power LED 4. Volume level LEDs 5. TALK Bu�on 6. OK & ZOOM IN/OUT Bu�on 7. VOLUME UP Bu�on 8. MENU Bu�on 9. VOLUME DOWN Bu�on 10. Microphone 11. Brightness DOWN bu�on 12.
3.3 Icons overview ------- Signal ------- Volume ------- Night Light ------ Brightness ------ Lullaby --------- ECO ------ Camera -------- Battery ----- Zoom ----- Talk to baby ˚ 78F ------- Temperature -------- Night vision 4. Operating the monitor • The Baby Unit should be placed at least 5 feet away from the baby's crib on a flat surface. Alternatively, it can be wall-mounted. • Never place the Baby Unit inside the crib, bed or playpen.
4.3 Charging the Parent Unit • Connect the power adapter to the Parent Unit; • Plug the adapter into the wall outlet. • Charging LED on the Parent Unit will light in RED. • When unit is turned on, the charging LED will light in RED and battery charging icon (changing bars) will appear at the top right corner of the LCD screen. • It takes approximately 8 hours to fully charge the battery.
5.7 Infrared Night Vision (Automatic) • The infrared night vision function allows the camera to pick up images of your baby or the monitored area in dark or low light conditions. • In this mode, only black and white colors will be displayed on the Parent Unit screen. • When the camera is in night vision mode, the icon will be displayed on top of the LCD screen. • The optimum image is obtained up to 6 feet distance between baby unit and object. 6. Menu Operation 6.
6.3 Temperature Unit Setting • Press the MENU/EXIT button (8) and the menu screen will be displayed on the Parent Unit. • Press the LEFT button (11) or RIGHT button (12) until the Temperature icon is highlighted in red and then press OK (6) to confirm. • Press the LEFT button (11) or RIGHT button (12) to select between C˚or F˚. • Press OK (6) to confirm. • Press the MENU/EXIT button (8) to Exit. Note 1: Temperature indicator will be displayed on top of the LCD screen.
7. Maintenance • All of the following maintenance procedures shall be performed when baby and parent units are not plugged in to the wall outlet. • Clean the surfaces of the Baby and Parent Units with a soft, fluff-free cloth. • Never use cleaning agents or solvents. • If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care to not allowing water into any openings. 8.
10. Troubleshooting Problem Possible cause(s) No reception on the Parent Unit • The power adapters may not be properly connected. • Ensure that the Baby and Parent Units are ON. • Make sure the Baby Unit and Parent Unit are not far away from each other. • Baby Unit and Parent Unit may not be properly paired. Follow PAIRING instructions. • Move the Baby Unit closer to Parent Unit. Interference or poor reception • The Baby or Parent Units may be too close to metal objects.
Video Baby Monitor By V.INT.UG.01.V24R_2.12.