User Guide Smart Link 4.3” Touch Screen Video Monitor A Model Number: 05020 Software Version: V 1.0.
Important Safety Instructions • • • • Adult assembly is required. This product is not a toy. Do not allow children to play with it. This Video Monitor is not a substitute for responsible adult supervision. Test the Monitor and all its functions so that you are familiar with it prior to actual use. WARNING! Strangulation Hazard: Children have STRANGLED in cords. Keep this cord outof the reach of children (more than 3 ft. (0.9 m) away). CAUTION: Keep small parts out of the reach of children.
Contents 1 Overview.............................................................................................. 4 Parent Unit ........................................................................................... 5 Baby Unit .............................................................................................. 6 2 Getting Started .................................................................................. 7 Placement ......................................................................
Overview 1 Welcome to your Smart Link Monitor Your Smart Link 4.3" Touch Screen Video Monitor allows you to clearly see and hear baby from within your home. Our unique Baby Tracker lets you log and track baby's important data such as feedings, weight, sleep, and more. This User Guide describes the features of the Smart Link Monitor system. More Information Call our Consumer Care: 1-855-661-8333 On the Web: www.att.
Overview of your Parent Monitor (monitor) Volume Power and Screen On/Off Reset USB Charging Port Multitouch Display Sound Indicator Lights On Back of Parent Unit: • Stand • Speaker Parent Unit Overview 5
Overview of your Baby Unit Power LED Reset Microphone Camera Lens Night-View LEDs Angle and Rotation Adjustment AC Charging Port Wall Mount Hole On Back of Baby Unit: • Antenna Baby Unit Overview 6
Getting Started 2 Placing Your Camera When deciding on where to place your Baby Unit, be conscious of the ambient light and noise. Test the video and sound quality from a few locations before deciding on the final spot. 3 ft. Place the camera on a flat surface, such as a table, dresser top, or shelf. Face the camera lens towards what you want to see. The camera’s cord must be more than 3 feet away from the reach of children. 3 ft.
Wall-Mounting the Baby Unit To mount the Baby Unit to a wall or other vertical surface, you will need the following: Tools Needed: Parts Needed (Included): • Drill • 1/4 inch Drill Bit (for drywall) • 1/8 inch Drill Bit (for other) • Phillips Screwdriver (+) • Pencil • Drywall Anchor • Screw • Baby Unit (camera) Instructions Hold the camera up on the wall and test what the video will look like in the Parent Monitor.* When you are satisfied with the video, mark the spot with the pencil.
Powering the Parent Unit Turn on the Parent Monitor by and holding the Power button on the top edge for 3 seconds. The Sound Indicator Lights will flash all colors and then the lowest light will be steady green. Follow the on-screen instructions to setup the monitor. (See page 10 for details) Note: The Screen On/Off feature allows you to turn the monitor screen off while still hearing audio from the camera. Simply press the Screen On/Off (Power) button for 1 second to turn the screen on or off.
Setup Once the monitor has started up, follow the on screen instructions to: - 3 Connect to your home Wi-Fi network Set the Date and Time Create a baby profile Setup your Baby Unit (Camera) Connecting to your home WiFi The Baby Unit (camera) connects to the Parent Monitor using your home WiFi network. If the WiFi symbol appears at the top right of the screen, you’re connected to a Wi-Fi network. The Smart Link Monitor reconnects anytime you return to the same network.
Camera Setup and Pairing to the Parent Monitor After saving your Baby’s Profile, it’s time to setup the camera. Follow the on-screen instructions. Be sure that the Camera is plugged into a working electrical outlet. The Power LED should glow green if it is powered on. Tap Next. Enter your camera’s unique serial number, which is found on the bottom of them camera. Then enter a name for this camera, such as: John’s Crib or Playroom. The default name is Camera 1. Tap Connect.
Basics 4 Sound Indicator Lights and Volume The Sound Indicator Lights on the Parent Monitor serve two purposes: (1) The default shows the level of sound coming into the monitor from the Baby Unit. A quiet room = green lights; a loud room = red lights. (2) When the Volume Keys (+) () are pressed, the lights will briefly show the volume level that comes out of speaker in the Parent Monitor; there are 6 volume levels.
Monitor 5 Full Screen For full screen, tap the center of the video.Double-tap again to return to controls. Digital Pan and Zoom Pinch again to return to regular view. When zoomed in, swipe the screen to pan.Pinch the video feed to digital zoom. Capture a Photo Take a still photo of the video by tapping the Photo Capture button. View the photos you captured from video by tapping the View Photo button in the lower left.
Journal Mode 6 Main Journal View Create a fun keepsake of your child’s milestones with photos and text. Swipe to move through the journal pages when you’ve added more than 2 pages of entries. Tap an individual entry to read all of your notes.Create a fun keepsake of your child’s milestones with photos and text. Make a New Journal Entry Make a new journal entry by selecting the Plus button. Select the Add Image button to add images from your Camera Roll. Tap the title to add a title.
Data / Baby Tracker 7 Graph View Keep track of weight, length, sleep, feedings, diapers, temperature and medicines. Use the Navigation buttons across the bottom to view the different categories. Log New Data Select the category. Tap the Plus button to add a new data entry for that category. Enter the data and tap Save. You can add a note or make edits by tapping the arrows in the summary. Tap Save again to confirm the summary.
Settings 8 Set an Alert Control device settings such as screen shutoff time, brightness, and date/time. Access your Wi-Fi network and social media settings. Your camera and baby profile settings are also found here and can be easily edited. Set an Alert Set Alerts for any baby related event - from medicines to doctor’s appointments. From the Settings menu, tap Alerts. A list view displays Alerts you have already saved. Tap one to edit. Tap the plus button to set a new alert.
Other Information 9 Cleaning and Care • Keep your Audio Monitor away from direct sunlight, as well as hot or humid areas. • Do not let the product get wet. • To clean your Audio Monitor, disconnect all cables and turn off. Use a soft, lint-free cloth. Avoid getting moisture in openings. Do not use cleaning solutions or compressed air. FCC - Part 15 This device complies with part 15 of the FCC Rules.
Exposure to Radio Frequency Energy This product contains radio transmitters and receivers. When on, This product sends and receives radio frequency (RF) energy through its antenna. The Wireless antenna is located on the back of the device. This product has been tested and meets the SAR (Specific Absorption Rate) exposure requirements for WLAN operation.
Warranty Video Monitor & Accessory Limited Warranty The AT&T brands are used under license. Thank you for purchasing this AT&T branded product manufactured under license by Baby’s Journey, Inc. (“Baby’s Journey”). Any repair, replacement or warranty service, and all questions about this AT&T branded product should be directed to: Baby’s Journey, Inc. 999 Main Street Unit 703 Pawtucket, RI 02860 Call our Consumer Care: 1-855-661-8333 Via Email: support@mhealthbabymonitors.
Warranty Exclusions Normal wear and Tear Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Abuse and Misuse Defects or damage that result from: (a) improper operation or failure to follow the instructions; (b) storage, misuse, or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.