BABI SMART CUSHION User Manual
Product Description BABI Smart Cushion is an universal and easy to use baby safety product, designed to monitor the presence of an infant in any brand of car baby seat. In the event that an infant is forgotten in a vehicle, an alarm will be raised visually and audibly via one of the BABI accessory devices or via a mobile phone App. This alarm will stay active until the infant is removed from their baby seat or the alarm is deactivated.
Technical Specifications: Product Name Babi Smart Cushion Product Code BSC1001 Dimension 202 * 218.5 * 13mm Operating temperature -20°C to +60°C Rated Voltage DC 3V Rated Power ≤50mW Communication Technology Bluetooth Low Energy Input Power (Replaceable) Primary 3V CR2450 battery (Not rechargeable) Phone compatibility Android 6.0 or higher iOS 10.
To setup the BABI Smart Cushion Remove the BABI Smart Cushion from the product box. Feed the baby car seat belt socket through the slot hole of the Smart Cushion, then place the cushion onto the base of the baby car seat. Make sure that the BABI Logo on the Cushion is facing upwards. Now download the Babisit Mobile App available for both IOS and Android via their APP stores.
To Register An Infant 1. 2. 3. Press the + icon as shown below. Note up to 4 infants can be registered and monitored by phone App. Insert the Infants name by first pressing the infant icon to place a photo of the infant. A photo can be taken of infant or a photo can be taken from your photo gallery, once selected it can be inserted. Once inserted the infants photo and name are displayed as below.
Press the connect bar in the App as shown below. This will connect the smart cushion to the App. When the App is connected and paired with the smart cushion there will be a longer beep sound to confirm the connection. The infant’s photo and name will be displayed along with a battery charge level indicator for the connected cushion. The battery charge indicator will change color as battery charge lowers. When the battery is critically low this icon will become red.
To Add Associated Users Once the Smart cushion is connected to the App, the main user can add associated users as follows (1) Both Main User and Secondary User should press QR CONN; (2) Secondary User should press SHOW MY QR CODE, this will display the device’s unique QR Code; (3) Main User should press SCAN QR CODE over the QR code of the Secondary User and then input the name of the Secondary User.
Using The Product The main screen will now show the battery charge level status of the BABI Smart Cushion and indicate the presence of the infant in their baby car seat. When the infant is not present on the BABI smart seat cushion, the infant picture will be shown in black and white. When the infant is present, the infant picture is shown in color along with the battery charge indicator above.
- dAlarmwith the rescue of the infant that is Mode When the infant is abandoned in a vehicle unattended. and the guardian walks away from the vehicle, after a distance of 10 to 15 - Map the exact position of the meters, theshowing guardian will receive an alarm message on his phone, for example: unattended infant “ATTENTION! (NAME) HAS BEEN that is abandoned. ABANDONED” - and monitors the presence of the The phone will emit an audio alarm sound, vibrate and flash the camera LED. infant.
Using BABI Accessory Devices BABI Smart Cushion has two accessory products that can either be used together WITH the mobile phone App. OR the two devices can use be used with the Smart Cushion WITHOUT the mobile phone App. BABI SAFE A Preemptive in car alarm device that plugs in to the 12 Volt cigarette lighter socket. It can be used with or without the Babisit mobile phone App with the same function.
6 Options to use BABI Products 1 2 + 3 + USE WITH THE MOBILE PHONE APP USE WITHOUT THE MOBILE PHONE APP 4 + 6 5 10
Product maintenance - - - The outer cushion cloth cover is water resistant, it is removable and washable according to the instruction on the inner label. Before washing the cushion cloth, open the zip, take out the inner part and store in a clean and dry place. Then the cover can be washed and dried. Battery duration is estimated to be 2 years and need to be replace when 4 consecutive beeps sound during an infant is on the Baby car seat.
4&5 6 Warranty The product is guaranteed against any non-conformity defect within normal operational conditions of use, as provided by the instructions for use. The warranty shall not therefore apply in the case of damages caused by improper use, wear or accidental damage events. (Note: The battery is not included in the warranty as it is a consumable and is to be replaced as required.
Important notes: - A Lithium battery is used in this device. Please ensure that when a new battery is installed and the battery is placed the correct way. Please dispose of old battery carefully and in special waste container. - Please ensure that the smart cushion is correctly installed and fitted into the baby car seat before using the device. - Do not use the device with other non approved accessories. - Do not use the product without the cushion cover.
Declaration of Conformity BABI Ltd hereby declares that Babi cushion is in conformity with the essential requirements and the related dispositions established by EU directives. The product is CE, FCC, IC, EMC, and RED certifed Also ROHS and REACH compliant. Conformity Certifications BABI Ltd, the supplier of this product is a Hong Kong registered company. BABI Ltd declares that the BABI Smart Cushion and it’s related APP comply to all criteria and specifications to the Italian Law 117 & Decree no 122.
www.babisit.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
ISED Statement ‐ English: This device complies with Industry Canada license ‐ exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B). ‐ French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.