Installation Instructions

ManualsBrandsB&W Group ManualsAudio EquipmentWireless Active Soundbar

Welcome to Bowers & Wilkins and the Panorama 3

Thank you for choosing Bowers & Wilkins. When John Bowers first established our company he

did so in the belief that imaginative design, innovative engineering and advanced technology

were keys that could unlock the enjoyment of audio in the home. His belief is one that we

continue to share and it inspires every product we design.

The Panorama 3 is a very high performance product that rewards thoughtful installation, so we

suggest that you take some time to read this manual before you begin.

Panorama 3 is a network connected, active multi-channel Atmos sound bar that enables both

TV audio and other audio sources and streams to played without the need for conventional

amplification components. The Panorama 3 is primarily intended to be controlled using the

Bowers & Wilkins Home iOS or Android app, however commonly used control functions are also

available via buttons on the top of the speaker. When connected directly to a television,

Panorama 3 volume can be controlled by the television remote control.

Before you begin installing and configuring your Panorama 3, please download and install the

Bowers & Wilkins Home app on your iOS or Android device. It is only possible to install and

configure the Panorama 3 using the Home app.

With your Panorama 3 sound bar you can:

• Play any audio from a TV connected to the Panorama 3 via HDMI or optical connections

• Play audio streams via AirPlay2 directly from compatible devices

• Play audio streams via either a wired or wireless network connection directly from a variety

of music streaming services or from local network storage devices.

• Play music streamed from an OS X, iOS, Android, Windows or Windows Mobile device

using Bluetooth wireless technology.

This manual will tell you everything you need to know to get the most from your Panorama 3. It

begins by listing the contents of the Panorama 3 carton.

Summary of content (5 pages)

PAGE 1
Welcome to Bowers & Wilkins and the Panorama 3 Thank you for choosing Bowers & Wilkins. When John Bowers first established our company he did so in the belief that imaginative design, innovative engineering and advanced technology were keys that could unlock the enjoyment of audio in the home. His belief is one that we continue to share and it inspires every product we design.
PAGE 2
1.
PAGE 3
Your Panorama 3 sound bar is primarily intended to be controlled by the TV remote control or the Bowers & Wilkins Home app, however on-body buttons provide volume controls and play/pause control. A reset button adjacent to connection sockets enables the Panorama 3 to be returned to its default factory settings. 2. Wall Mounting your Panorama 3 If your Panorama 3 is to be wall mounted, the bracket screw hole positions on the wall must first be established.
PAGE 4
. Setting up your Panorama 3 Once connected to mains power your Panorama 3 can be configured and set up using the Home app. If you have not already downloaded and installed the app on your iOS or Android device please do so now. The Home app will guide you through the following configuration and setup stages so that your Panorama 3 is ready for use. • Product Identification: Enables your Panorama 3 to be named and the type of installation to be specified.
PAGE 5
6. Resetting your Panorama 3 The Panorama 3 has a reset button located adjacent to its connection panel. To return your Panorama 3 to its default settings press and hold the reset button for 5 seconds. The Panorama 3 indicator will flash while the reset procedure is underway. When the reset procedure is complete the Panorama 3 will restart. 7. Cleaning Your Panorama 3 Wipe surfaces with the supplied cleaning cloth.