INSTALLATION SAFETY INSTRUCTIONS CAUTION: This wall mount is intended for use only with the maximum weights indicated. Use with speakers heavier than the maximum indicated may result in instability causing possible injury. Do not attempt to install this product until all instructions and warnings have been read and properly understood. Please keep these instructions for future reference.
BT1 PARTS LIST 2 1 6 5 6 4 1 5 4 2 speaker mounts included 3 Suitable for loads up to 10kg (22lbs) per speaker mount 4
REF PART NAME QTY 1 WALL HINGE 4 2 SOLID ARM 2 3 SLOTTED ARM 2 4 M6 x 20mm SCREW 4 5 M6 WING NUT 4 6 M6 NUT 4 INTERFACE KIT A M4 x 19mm WOOD SCREW 8 FIXING KIT A1 M4 x 38mm WOOD SCREW 8 A2 No.
INSTALLATION INSTRUCTIONS 1 Fix wall hinges to the wall using one of the following methods. DISTANCES BETWEEN FIXING HOLES i. Brick / concrete walls. A2 1 1 125mm 4.9" 75mm 3.0" A1 1 6mm (1/4") masonry bit ii. Wood / stud walls.
2 Hook the solid arm onto the wall hinges.
3 Fix the slotted arm to the back of the speaker.
4 Fix speaker to wall mount. i. Slide Part 6 into Part 5. 6 5 ii. Line up slots on slotted arm with solid arm holes. Fix in place using Parts 4 and Part 5.
5 To adjust tilt, loosen wing nuts (parts 5), adjust tilt then retighten.
BT1 PRODUCT DIMENSIONS 75mm 3" 179mm 7" 47mm 1.9" INTERFACE BRACKET O 5mm 0.2" 173mm 6.8" 31mm 1.2" 75mm 3" 125mm 4.9" 18mm 0.7" 127mm 5" 5mm 0.2" 88mm 3.5" 114mm 4.5" O WALL HINGES 31mm 1.2" THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.