SHENZHEN B&T TECHNOLOGY Co., Ltd ZHONGSHAN B&T TECHNOLOGYCo., Ltd Project No:XW-01 Date:2020.04.20 Rev:V1.0 Acknowledgment Name of Customer: Model: XW-01 B&T Material No.: Configuration: XW-01 802.
SHENZHEN B&T TECHNOLOGY Co., Ltd ZHONGSHAN B&T TECHNOLOGYCo., Ltd SPECIFICATION XW-01 802.11 b/g/n Wi-Fi Module XW-01 Version: V1.
SHENZHEN B&T TECHNOLOGY Co., Ltd ZHONGSHAN B&T TECHNOLOGYCo., Ltd Disclaimer and copyright notice The information in this article, including the URL for reference, is subject to change without notice. The document is provided "as is" without any guarantee responsibility, including any guarantee of marketability, suitability for a specific purpose or non-infringement, and any guarantee mentioned elsewhere in any proposal, specification or sample.
SHENZHEN B&T TECHNOLOGY Co., Ltd ZHONGSHAN B&T TECHNOLOGYCo., Ltd Formulation/Revision/Abolition of CV Version Date V1.0 2020.04.
SHENZHEN B&T TECHNOLOGY Co., Ltd ZHONGSHAN B&T TECHNOLOGYCo., Ltd Content 1.PRODUCT DESCRIPTION.........................................................................................................................VI 2.ELECTRICAL PARAMETER.......................................................................................................................IX 3.DIMENSION........................................................................................................................................
SHENZHEN B&T TECHNOLOGY Co., Ltd ZHONGSHAN B&T TECHNOLOGYCo., Ltd 1.PRODUCT DESCRIPTION XW-01 WiFi module is developed by Ensink Technology, XW-01 is a highly integrated Wi-Fi module, the main chip XR808CT0 is a highly integrated single-chip WiFi microcontroller, which integrates 160MHZ high frequency The ARM Cortex-M4F core integrates a low-power 802.11b/g/n wireless network system and a low-power power management unit.
SHENZHEN B&T TECHNOLOGY Co., Ltd ZHONGSHAN B&T TECHNOLOGYCo., Ltd Features Support 802.11b/g/n,2400 ~ 2483.
SHENZHEN B&T TECHNOLOGY Co., Ltd ZHONGSHAN B&T TECHNOLOGYCo., Ltd Major parameter List 1 Major parameter description Model XW-01 Packaging SMD-22 Size 24*16*3(±0.2)MM Antenna PCB/IPEX antenna Spectrum range 2400 ~ 2483.5MHz Working temperature -40 ℃ ~ 85 ℃ Store environment -40 ℃ ~ 125 ℃ , < 90%RH Power supply Voltage 3.0V ~ 3.
SHENZHEN B&T TECHNOLOGY Co., Ltd ZHONGSHAN B&T TECHNOLOGYCo., Ltd 2.ELECTRICAL PARAMETER Electrical characteristic XW-01 series modules are electrostatic sensitive devices, and special precautions need to be taken during handling Condition Min Typical Max Unit DC 3.3V(With internal voltage regulator and integrated CMOS PA) 450 mA DC_IO(Including VDD_IO) 200 mA DC_IO_33(3.
SHENZHEN B&T TECHNOLOGY Co., Ltd ZHONGSHAN B&T TECHNOLOGYCo., Ltd 18±2 In 11b mode,PA output power is dBm Receiving sensitivity CCK, 1 Mbps <=-97 dBm CCK, 11 Mbps <=-90 dBm 6 Mbps (1/2 BPSK) <=-93 dBm 54 Mbps (3/4 64-QAM) <=-74 dBm HT20 (MCS7) <=-70 dBm Power consumption The following power consumption data is based on a 3.3V power supply, an ambient temperature of 25°C, and is measured using an internal voltage regulator.
SHENZHEN B&T TECHNOLOGY Co., Ltd ZHONGSHAN B&T TECHNOLOGYCo., Ltd 3.
SHENZHEN B&T TECHNOLOGY Co., Ltd ZHONGSHAN B&T TECHNOLOGYCo., Ltd 4.PIN DEFINITION The XW-01 module has 22 interfaces in total, as shown in the pin diagram, the pin function definition table is the interface definition. XW-01 PIN definition diagram PIN function No.
SHENZHEN B&T TECHNOLOGY Co., Ltd ZHONGSHAN B&T TECHNOLOGYCo.
SHENZHEN B&T TECHNOLOGY Co., Ltd ZHONGSHAN B&T TECHNOLOGYCo., Ltd 5.
SHENZHEN B&T TECHNOLOGY Co., Ltd ZHONGSHAN B&T TECHNOLOGYCo., Ltd 6.DESIGN GUIDE 1、Application circuit 2、Antenna layout requirements (1) The following two methods are recommended for the installation location on the motherboard: Option 1: Place the module on the edge of the main board, and the antenna area extends out of the edge of the main board. Option 2: Place the module on the edge of the motherboard, and the edge of the motherboard digs out an area at the position of the antenna.
SHENZHEN B&T TECHNOLOGY Co., Ltd ZHONGSHAN B&T TECHNOLOGYCo., Ltd 3、Power supply (1)、Recommended 3.3V voltage, peak current above 500mA (2)、It is recommended to use LDO power supply; if using DC-DC, it is recommended to control the ripple within 30mV. (3)、It is recommended to reserve the position of the dynamic response capacitor for the DC-DC power supply circuit, which can optimize the output ripple when the load changes greatly. (4)、3.3V power interface is recommended to add ESD devices.
SHENZHEN B&T TECHNOLOGY Co., Ltd ZHONGSHAN B&T TECHNOLOGYCo., Ltd 7.PACKAGING As shown below, the packaging of XW-01 is taping.
Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules The XW-01 is an Wi-Fi Module with digitally modulated systems using an DSSS with DBPSK/DQPSK/CCK for 802.11b; OFDM with BPSK/QPSK/16QAM/64QAM for 802.11g/n; modulation. It operates on the 2400-2483.5MHz band and, therefore, is within U.S. FCC part 15.247 standard 2.3 Specific operational use conditions The EUT is a Wi-Fi Module Operation Frequency: 2412-2462MHz for 802.
2.10 Additional testing, Part 15 Subpart B disclaimer The module without unintentional-radiator digital circuit, so the module does not required an evaluation by FCC Part 15 Subpart B. The host should be evaluated by the FCC Subpart B.