Integration Guide

ManualsBrandsB&R Industrial Automation ManualsElectronicsB&R wireless board

We reserve the right to change the content of this manual without prior notice. The information contained

herein is believed to be accurate as of the date of publication, however, B&R makes no warranty, expressed

or implied, with regards to the products or the documentation contained within this document. B&R shall not

be liable in the event if incidental or consequential damages in connection with or arising from the furnishing,

performance or use of these products. The software names, hardware names and trademarks used in this

document are registered by the respective companies.

Integration Guide RFM-2-NF_Version 1.0.docx

April 4, 2019

1/9

B&R wireless board "RFM-2-NF"

Integration Guide

Date:

April 4, 2019

Project number:

N/A

Summary of content (9 pages)

PAGE 1
B&R wireless board "RFM-2-NF" Integration Guide Date: April 4, 2019 Project number: N/A We reserve the right to change the content of this manual without prior notice. The information contained herein is believed to be accurate as of the date of publication, however, B&R makes no warranty, expressed or implied, with regards to the products or the documentation contained within this document.
PAGE 2
B&R wireless board "RFM-2-NF" Integration Guide I Version information Version information Version Date Comment Responsible 1.0 2019-04-02 First Edition R. Sevcik. Table 1: Versions II Distribution Name Company, Department Fr.
PAGE 3
B&R wireless board "RFM-2-NF" Integration Guide Table of Contents IV Table of Contents 1 Introduction ................................................................................................................. 4 2 Integration instructions.............................................................................................. 4 2.1 Mounting of the board, connecting to PC ............................................................................................. 4 2.
PAGE 4
B&R wireless board "RFM-2-NF" Integration Guide Introduction 1 Introduction This document provide integration instructions and should be used when integrating a module in a host product. The full modular transmitter RFM-2-NF can be integrated into a variety of products.
PAGE 5
B&R wireless board "RFM-2-NF" Integration Guide List of applicable guidelines, standards, rules 2.2 List of applicable guidelines, standards, rules Domain/country EU domain FCC Domain References Radio Equipment Directive 2014/53/EU FCC Rules and Regulations Part 15, Subpart C - Intentional Radiators Part 15, Subpart C, Section 15.203 Antenna requirement Part 15, Subpart C, Section 15.204 External radio frequency power amplifiers and antenna modifications Part 15, Subpart C, Section 15.
PAGE 6
B&R wireless board "RFM-2-NF" Integration Guide User manual information 2.7 User manual information The user manual should contain the following information: Domain/Country EU USA Information This product is in conformity with the protection requirements of the EU Council Directive 2014/53/EU. This device complies with Part 15 of the FCC rules.
PAGE 7
B&R wireless board "RFM-2-NF" Integration Guide Figure Index 3 Figure Index Figure 1: B&R wireless board „RFM-2-NF“ with USB-Cable ......................................................................... 4 Figure 2: : Layout proposal marking of host for the North American Domain ............................................... 5 Copyright © B&R - Subject to change without notice Integration Guide RFM-2-NF_Version 1.0.
PAGE 8
B&R wireless board "RFM-2-NF" Integration Guide Table Index 4 Table Index Table 1: Versions ........................................................................................................................................... 2 Table 2: Distribution ....................................................................................................................................... 2 Table 3: Safety notices ............................................................................................
PAGE 9
B&R wireless board "RFM-2-NF" Integration Guide Index 5 Index D S Distribution ............................................................ 2 Safety guidelines .................................................. 2 F T Figure Index .......................................................... 7 Table Index .......................................................... 8 Table of Contents ................................................. 3 I Index ............................................................