Manual MotionSensor v1.
User Manual Review the user manual before using PitchPerfect. User manual can be found on www.pitchperfect-baseball.com/ usermanual PitchPerfect consists of two sensor that are affixed with a magnet in a shirt and shorts. The trunk sensor is worn against the chest in the shirt and the hip sensor is worn in the back of the shorts on the pelvis. The devices can be used with a mobile application (for both IOS and Android), which can be found in the AppStore and Google Play under the name PitchPerfect Baseball.
How to use? 1. Turn your sensors on To turn the sensor on, press the button on the back of the sensors for 3 seconds until the green light flashes on. 2. Connect with the app In the settings menu, press the ‘connect shirt’ or ‘connect pants’ button to view available sensors. After you select both, the sensors will automatically start to synchronise. 3. Click sensors in clothing. Click the sensor with the green logo in the shirt. Click the sensor with the white logo in the pants. 4.
Charging Case PitchPerfect includes a charger case that can be used to store, cary and charge the sensors. The charger is delivered with a USB-C cable. 1. Power up the charger by connecting it with a USB-C cable to an AC-adapter. Any AC-adapter, with a 5VDC USB-A output rated at 500mA can be used for this charger. The green light on the front of the charger will turn on when connected properly. 2. The sensors will start chargin when when the magnets on the sensor are connected in the charger case.
Safety Notes These instructions are for your personal safety, so please read them carefully! They protect you from electric shocks, injury, fire or explosions. • Do not open the units! This might damage the safeguards of the units. • Never remove any warning or labels from the units. • This sensor contains a Lithium polymer battery. • Do not expose to fire. • Do not expose to high or extreme low pressures. • Do not penetrate the units. • Do not emerge the units in water.
Specifications Parameter Value Rated input voltage charger 5 Input voltage tolerance ±5 Rated input current 500 Battery charge capacity sensor 60 Battery time >10 Dimensions charger(lxwxh) 111x71x22 Weight charger 80 Operating temperature 0-45 Operating height 0-2000 Unit Vdc % mA mAh h mm g °C m Maintanance Before any work on the unit, pull the charging cable out of the unit and make sure the unit is turned off.
Disposal Information The unit, accesoires and packaging should be sorted for environment-friendly recycling. Disposal Information (European Union) This symbol on the unit or packaging indicates that this product complies with the WEEE directive 2012/19/EU and that disposalof the unit after its life-cycle could harm the environment. Do not dispose the unit (or its batteries) as unsorted municipal waste. This unit should be returned to your distributor or to a local recycling service.
FCC Compliance Statement Sensor This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance.
FCC Complaince Statement Charger This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance.
Contact PitchPerfect Haagweg 1 4814GA, Breda www.pitchperfect-baseball.