AW-NM191NF IEEE 802.11b/g/n Wireless LAN Module (M.2 1216) (Industrial version) Datasheet Version 0.
Revision History Document release Date Version 0.
Table of Contents 1. GENERAL DESCRIPTION ............................................................................................................... 4 2. KEY FEATURES ................................................................................................................................ 5 3. SPECIFICATIONS TABLE ............................................................................................................... 6 4. ELECTRICAL CHARACTERISTICS ...................................
1. General Description AzureWave Technologies, Inc. introduces the pioneer of the IEEE 802.11 b/g/n WIFI M.2 module --- AW-NM191NF. The AW-NM191NF IEEE 802.11 b/g/n WIFI M.2 module is a highly integrated wireless local area network (WLAN) solution to let users enjoy the digital content through the latest wireless technology without using the extra cables and cords. It enables a high performance, cost effective, low power, compact solution that provides SDIO or USB interface to host processor.
2. Key Features 1. 2. 3. 4. 5. 6. High speed wireless connection up to 72.2 Mbps for Wi-Fi 2 antennas to support 1(Transmit) 1(Receive) diversity technology Low power consumption and high performance Enhanced wireless security USB 2.0 device interface with LPM support SDIO 2.0 device interface (1-bit SDIO, 4-bit SDIO transfer modes at full clock range up to 50 MHz) Note: This module supports both USB and SDIO interfaces, but default setting is USB interface.
3. Specifications Table Model Name AW-NM191NF Product Description Wireless LAN M.2 Module WLAN Standard IEEE 802.11b/g/n, Wi-Fi compliant Major Chipset Marvell 88W8801 Host Interface WLAN : SDIO/USB ANT2: WIFI-TX/RX Antenna Dimensions ANT1: WIFI-TX/RX 12 mm X 16 mm x 1.95 mm Weight TBA Operating Conditions Voltage 3.
Secure Easy Setup™ for simple Wi-Fi® setup and WPA2/WPA security configuration Wi-Fi Protected Setup (WPS) WEP WMM / WMM-SA CKIP(Software) ESD test condition HBM +-2KV CDM +-500V Operating System Compatibility TBA Regulatory CE and FCC 7
4. Electrical Characteristics 4.1 Absolute Maximum Ratings Symbol VIO VIO_SD 3.3V Parameter 1.8V/3.3V digital I/O power supply 1.8V/3.3V digital I/O SDIO power supply 3.3V I/O power supply Min Typ Max Units - 1.8 2.2 - 3.3 4.0 - 1.8 2.2 - 3.3 4.0 - 3.3 4.0 V Min Typ Max Units 1.62 1.8 1.98 2.97 3.3 3.63 1.62 1.8 1.98 2.97 3.3 3.63 2.97 3.3 3.63 V V 4.2 Recommended Operating Conditions Symbol VIO VIO_SD 3.3V Parameter 1.8V/3.3V digital I/O power supply 1.8V/3.
4.
SDIO Timing Data Symbol Parameter fpp CLK Frequency TWH TWL TISU TIH Condition Min Normal 0 Typ Max 25 High Speed 0 Normal 10 High Speed 7 Normal 10 High Speed 7 Normal 5 High Speed 6 Normal 5 High Speed 2 CLK High Time CLK Low Time Input Setup Time Input Hold Time Units MHz 75 - - - - - - - - TODLY Output Delay Time - 0 - 7.33 TOH Output Hold Time High Speed 2.
5. Pin Definition 5.1 Pin Description (1216 M.2 Solder down) Type Voltage Level JTAG controller select (input) Input VIO TCK JTAG test clock (input) Input VIO 3 TDI JTAG test data (input) Input VIO 4 3.3V 3.3V Power supply. VCC - 5 3.3V 3.3V Power supply. VCC - 6 GND Ground. GND - 7 TDO JTAG test data (output) Input VIO 8 NC No connect to gold fingers. Floating - 9 NC No connect to gold fingers. Floating - 10 NC No connect to gold fingers.
29 NC No connect to gold fingers. Floating - 30 NC No connect to gold fingers. Floating - 31 NC No connect to gold fingers. Floating - 32 GND GND - 33 NC No connect to gold fingers. Floating - 34 NC No connect to gold fingers. Floating - 35 GND GND - 36 NC No connect to gold fingers. Floating - 37 NC No connect to gold fingers. Floating - 38 GND GND - 39 NC No connect to gold fingers. Floating - 40 NC No connect to gold fingers.
54 NC No connect to gold fingers. Floating - 55 NC No connect to gold fingers. Floating - 56 NC No connect to gold fingers. Floating - 57 GND GND - 58 NC No connect to gold fingers. Floating - 59 NC No connect to gold fingers. Floating - 60 NC No connect to gold fingers. Floating - 61 NC No connect to gold fingers. Floating - 62 GND GND - 63 NC No connect to gold fingers. Floating - 64 NC No connect to gold fingers.
90 GND Ground. GND - 91 GND Ground. GND - 92 GND Ground. GND - 93 GND Ground. GND - 94 GND Ground. GND - 95 GND Ground. GND - 96 GND Ground. GND - G1 GND Ground. GND - G2 GND Ground. GND - G3 GND Ground. GND - G4 GND Ground.
6.
7. FCC Statement Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
As long as all conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product.
