AW-CM390SM IEEE 802.11a/b/g/n/ac Wi-Fi with Bluetooth 5.0 Combo Stamp Module Datasheet Rev. B DF (For Standard) 1 FORM NO.: FR2-015_ A Responsible Department：WBU Expiry Date: Forever The information contained herein is the exclusive property of AzureWave and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of AzureWave.
Features WLAN High speed wireless connection up to Bluetooth 433.3Mbps transmit/receive PHY rate 1 antennas to support 1(Transmit) 1(Receive) technology and Bluetooth using 80MHz bandwidth Fully qualified Bluetooth BT4.2 1 antennas to support 1(Transmit) Compliant Bluetooth BT5.
Revision History Document NO: R2-2390SM-DST-01 Revision Version DCN NO. Date 0.1 2018/07/13 Description First Release 1. Update 1.3 Block Diagram 2. Update 1.4 Specifications Table 3. Update 3.2 Recommended Operating Conditions 4. Update 4.1 PCB Footprint 1. Update 1.2.2 Bluetooth feature 0.2 2018/11/01 0.3 2018/11/16 0.4 2018/11/19 1. Update 2. Pin Definition 0.5 2018/12/07 1. Update 1.3 Block Diagram 0.6 2019/04/03 1. Update to BT 5.0 0.7 2019/05/06 1. Remove 2.4G HT40 0.
Table of Contents Features ........................................................................................................................................... 2 Revision History .................................................................................................................................. 3 DCN016600 ........................................................................................................................................... 3 Table of Contents ......................
1. Introduction 1.1 Product Overview AzureWave Technologies, Inc. introduces the pioneer of the IEEE 802.11 a/b/g/n/ac WIFI with Bluetooth 5.0 combo SDIO and UART Stamp Module --- AW-CM390SM. The AW-CM390SM IEEE 802.11 a/b/g/n/ac WIFI with Bluetooth 5.0 combo module is a highly integrated wireless local area network (WLAN) solution to let users enjoy the digital content through the latest wireless technology without using the extra cables and cords. It combines with Bluetooth 5.
1.2 Block Diagram TBD 6 FORM NO.: FR2-015_ A Responsible Department：WBU Expiry Date: Forever The information contained herein is the exclusive property of AzureWave and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of AzureWave.
1.3 Specifications Table 1.3.1 General Features Description Product Description IEEE 802.11 a/b/g/n/ac Wi-Fi with Bluetooth 5.0 combo stamp module Major Chipset CYW43455 Host Interface Wi-Fi:SDIO , BT:UART Dimension 12 mm X 12mm x 1.65 mm Package LGA package Antenna 1X1 Weight 0.48g 1.3.2 WLAN Features Description WLAN Standard IEEE802.11 WLAN VID/PID 1A3B / 2390 Frequency Rage Modulation Number of Channels 2.4 GHz ISM Bands 2.412-2.472 GHz 5.15-5.
2.4G 11b (11Mbps) @EVM<35% 11g (54Mbps) @EVM≦-27 dB 11n (HT20 MCS7) @EVM≦-28 dB 5G Output Power (Board Level Limit)* 11a (54Mbps) @EVM≦-27 dB 11n (HT20 MCS7) @EVM≦-28 dB 11n (HT40 MCS7) @EVM≦-28 dB 11ac (VHT20 MCS8) @EVM≦-30 dB 11ac (VHT40 MCS9) @EVM≦-32 dB 11ac (VHT80 MCS9) @EVM≦-32 dB 2.4G 11b (11Mbps) 11g (54Mbps) 11n (HT20 MCS7) Receiver Sensitivity Data Rate 5G Min Typ Max Unit 16.5 18 19.5 dBm 14.5 16 17.5 dBm 13.5 15 16.5 dBm Min Typ Max Unit 13.5 15 16.5 dBm 13.
WPA and WPA2(Personal) support for powerful encryption and authentication. AES and TKIP in hardware for faster data encryption and IEEE Security 802.11i compatibility. Reference WLAN subsystem provides Cisco Compatible Extensions(CCX, CCX2.0, CCX3.0 and CCX4.0). Reference WLAN subsystem provides Wi-Fi Protected Setup(WPS). * If you have any certification questions about output power please contact FAE directly. 1.3.3 Bluetooth Features Description Bluetooth Standard BT5.
1.3.4 Operating Conditions Features Description Operating Conditions Voltage VBAT: 3.2 ~ 4.8V ; typical: 3.6V VIO : 1.71 ~ 3.63V Operating Temperature -30 to +85 oC1 Operating Humidity less than 85% R.H. Storage Temperature -40 to +100 oC Storage Humidity less than 60% R.H. ESD Protection 1 Human Body Model 1KV per JEDEC EID/JESD22-A114 Changed Device Model 250V per JEDEC EIA/JESD22-C101 Functionality is guaranteed across this ambient temperature range.
2. Pin Definition 2.1 Pin Map AW-CM390SM Top View Pin Map 11 FORM NO.: FR2-015_ A Responsible Department：WBU Expiry Date: Forever The information contained herein is the exclusive property of AzureWave and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of AzureWave.
2.2 Pin Table Pin No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Definition GND WL_BT_ANT GND NC NC BT_WAKE BT_HOSTWAKE NC VBAT GND GND WL_REG_ON Basic Description Ground. WLAN/BT RF TX/RX path. Ground. Floating Pin, No connect to anything. Floating Pin, No connect to anything. BT Device Wake BT Host Wake Floating Pin, No connect to anything. 3.3V power pin Ground. Ground.
33 34 GND BT_REG_ON 35 36 37 38 39 40 41 42 43 44 45 46 47 NC GND GPIO_6 GPIO_3 GPIO_5 GPIO_2 BT_UART_RTS_ N BT_UART_TXD BT_UART_RXD BT_UART_CTS_ N NC NC NC Ground. Used by PMU to power up or power down the internal regulators used by the Bluetooth section. Also, when deasserted, this pin holds the Bluetooth section in reset. This pin has an internal 200k ohm pull down resistor that is enabled by default. It can be disabled through programming. Floating Pin, No connect to anything. Ground.
3. Electrical Characteristics 3.1 Absolute Maximum Ratings Symbol Parameter Minimum Typical Maximum Unit VBAT DC supply for the VBAT and PA driver supply -0.5 - +6.0 V VDDIO DC supply voltage for digital I/O -0.5 - +3.9 V Minimum Typical Maximum Unit 3.2 Recommended Operating Conditions Symbol Parameter VBAT Power supply for the internal regulators and FEM 3.2 3.6 4.8 V VDDIO DC supply voltage for digital I/O 1.71 - +3.63 V Minimum Typical Maximum Unit VDDIO=1.
3.4 Host Interface 3.4.1 SDIO Interface AW-CM390SM support for SDIO version 3.0, including the new UHS-I modes: DS: Default speed (DS) up to 25MHz, including 1- and 4-bit modes (3.3V signaling). HS: High speed up to 50 MHz (3.3V signaling). SDR12: SDR up to 25 MHz (1.8V signaling). SDR25: SDR up to 50 MHz (1.8V signaling). SDR50: SDR up to 100 MHz (1.8V signaling). SDR104: SDR up to 208MHz (1.8V signaling). DDR50: DDR up to 50 MHz (1.8V signaling).
SDIO Timing Data(Default Mode) Symbol Parameter fpp CLK Frequency tWH CLK High Time tWL CLK Low Time tTLH CLK rise Time tTHL CLK fall Time tISU Input Setup Time tIH Input Hold Time tODLY Output Delay Time Condition Min Max Normal High Speed Normal High Speed Normal High Speed Normal High Speed Normal High Speed Normal High Speed Normal High Speed Normal High Speed 0 0 10 7 10 7 5 6 5 2 - 25 50 10 3 10 3 14 14 Units MHz ns 3.4.
UART Interface Signals PIN No. Name Description Type 42 BT_UART_TXD Bluetooth UART Serial Output. Serial data output for the HCI UART Interface O 43 BT_UART_RXD Bluetooth UART Series Input. Serial data input for the HCI UART Interface I 41 BT_UART_RTS_N Bluetooth UART Request-to-Send. Active-low requestto-send signal for the HCI UART interface O 44 BT_UART_CTS_N Bluetooth UART Clear-to-Send. Active-low clear-tosend signal for the HCI UART interface.
3.4.3 PCM Interface Timing 3.4.3.1 Short Frame Sync, Master Mode PCM Timing Diagram (Short Frame Sync, Master Mode) PCM Interface Timing Specifications (Short Frame Sync, Master Mode) 18 FORM NO.: FR2-015_ A Responsible Department：WBU Expiry Date: Forever The information contained herein is the exclusive property of AzureWave and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of AzureWave.
3.4.3.2 Short Frame Sync, Slave Mode PCM Timing Diagram (Short Frame Sync, Slave Mode) PCM Interface Timing Specifications (Short Frame Sync, Slave Mode) 19 FORM NO.: FR2-015_ A Responsible Department：WBU Expiry Date: Forever The information contained herein is the exclusive property of AzureWave and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of AzureWave.
3.4.3.3 Long Frame Sync, Master Mode PCM Timing Diagram (Long Frame Sync, Master Mode) PCM Interface Timing Specifications (Long Frame Sync, Master Mode) 20 FORM NO.: FR2-015_ A Responsible Department：WBU Expiry Date: Forever The information contained herein is the exclusive property of AzureWave and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of AzureWave.
3.4.3.4 Long Frame Sync, Slave Mode PCM Timing Diagram (Long Frame Sync, Slave Mode) PCM Interface Timing Specifications (Long Frame Sync, Slave Mode) 21 FORM NO.: FR2-015_ A Responsible Department：WBU Expiry Date: Forever The information contained herein is the exclusive property of AzureWave and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of AzureWave.
3.4.3.5 Short Frame Sync, Burst Mode PCM Burst Mode Timing (Receive Only, Short Frame Sync) PCM Burst Mode (Receive Only, Short Frame Sync) 22 FORM NO.: FR2-015_ A Responsible Department：WBU Expiry Date: Forever The information contained herein is the exclusive property of AzureWave and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of AzureWave.
3.4.3.6 Long Frame Sync, Burst Mode PCM Burst Mode Timing (Receive Only, Long Frame Sync) PCM Burst Mode (Receive Only, Long Frame Sync) 23 FORM NO.: FR2-015_ A Responsible Department：WBU Expiry Date: Forever The information contained herein is the exclusive property of AzureWave and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of AzureWave.
3.5 Power up Timing Sequence The AW-CM390SM has three signals that allow the host to control power consumption by enabling or disabling the Bluetooth, WLAN, and internal regulator blocks. These signals are described below. Additionally, diagrams are provided to indicate proper sequencing of the signals for various operational states. The timing values indicated are minimum required values; longer delays are also acceptable. Note: • The WL_REG_ON and BT_REG_ON signals are ORed in the AW-CM390SM.
This signal is used by the PMU (with WL_REG_ON) to decide whether or not to power down the internal AW-CM390SM regulators. If both BT_REG_ON BT_REG_ON and WL_REG_ON are low, the regulators will be disabled. When this pin is low and WL_REG_ON is high, the BT section is in reset. This pin has an internal 200 kΩ pull-down resistor that is enabled by default. It can be disabled through programming.
WLAN = OFF, Bluetooth = OFF WLAN = ON, Bluetooth = OFF 26 FORM NO.: FR2-015_ A Responsible Department：WBU Expiry Date: Forever The information contained herein is the exclusive property of AzureWave and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of AzureWave.
WLAN = OFF, Bluetooth = ON 3.6 Power Consumption* 3.6.1 WLAN Item Band (GHz) 2.4 5 VBAT=3.3V BW (MHz) RF Power (dBm) 11b@1Mbps 20 11g@54Mbps Mode Transmit Receive Max. Avg. 18 347 mA 337 mA DUTY % 97% 20 16 187 mA 173 mA 45% 11n@MCS7 20 15 174 mA 166 mA 11a@54Mbps 20 15 180 mA 11n@MCS7 40 13 11ac@MCS9 NSS1 80 12 Max. Avg.
3.6.2 Bluetooth VBAT=3.3V No. Mode 1 2 3 DH52 3-DH53 LE4 Transmit Max. 56 mA 35 mA Receive Avg. 46 mA 31 mA Max. 20 mA 20 mA Avg. 19 mA 20 mA * The power consumption is based on Azurewave test environment, these data for reference only. 2 3 4 BlueTool BB_Packet_Length=65535 BlueTool BB_Packet_Length=65535 BlueTool Length_of_Test_Data=37 28 FORM NO.
3.7 Frequency Reference An external crystal is used for generating all radio frequencies and normal operation clocking. As an alternative, an external frequency reference driven by a temperature-compensated crystal oscillator (TCXO) signal may be used. No software settings are required to differentiate between the two. In addition, a low-power oscillator (LPO) is provided for lower power mode timing. External 32.
4. Mechanical Information 4.1 Mechanical Drawing 30 FORM NO.: FR2-015_ A Responsible Department：WBU Expiry Date: Forever The information contained herein is the exclusive property of AzureWave and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of AzureWave.
5. Packaging Information 1. One reel can pack 1,500pcs 12x12 stamp modules (整軸產品數量為 1500pcs) 2. One production label is pasted on the reel, one desiccant and one humidity indicator card are put on the reel (卷軸貼上一張生產標籤，並放上一包防潮包及濕度指示卡) One desiccant One production label One humidity indicator card 3. One reel is put into the anti-static moisture barrier bag, and then one label is pasted on the bag (卷軸放進防靜電鋁箔袋，再貼上一張生產標籤) One production label 31 FORM NO.
4. A bag is put into the anti-static pink bubble wrap (防靜電鋁箔袋放進氣泡袋內) One anti-static pink bubble wrap 5. A bubble wrap is put into the inner box and then one label is pasted on the inner box (氣泡袋放進內箱中，再貼上一張生產標籤) 生產標籤 Production label One production label 6. 5 inner boxes could be put into one carton (五個內箱可以放進一個外箱) Production 32 FORM NO.
7. Sealing the carton by AzureWave tape (使用海華 Logo 膠帶將外箱進行工字型封箱) 8. One carton label and one box label are pasted on the carton. If one carton is not full, one balance label pasted on the carton (外箱上貼附出貨標籤和箱號標籤；如不滿箱，需貼附尾數標籤) One carton label 出貨標籤 One production label 生產標籤 One box label 箱號標籤 33 FORM NO.
Example of carton label (出貨標籤的範例) Example of box label (箱號標籤) Example of production label (生產標籤) Example of balance label (尾數標籤) 34 FORM NO.: FR2-015_ A Responsible Department：WBU Expiry Date: Forever The information contained herein is the exclusive property of AzureWave and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of AzureWave.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
IMPORTANT NOTE: This module is intended for OEM integrator. This module is only FCC authorized for the specific rule parts listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed.
