AW-CM382 IEEE 802.11 a/b/g/n/ac MAC/baseband/radio and Bluetooth 5.0 Module Datasheet Version 03 1 The information contained herein is the exclusive property of AzureWave and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of AzureWave.
Revision History Revision Date Description Version 0.1 2018/07 Initial Version Version 0.2 2018/10/24 Updated 1.4 , 2.2 & 3 Version 0.3 2019/07/09 Updated 1.4 Initials Steven Jian Steven Jian Steven Jian Approved Chihhao Liao Chihhao Liao Chihhao Liao 2 The information contained herein is the exclusive property of AzureWave and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of AzureWave.
Table of Contents Revision History .................................................................................................................................. 2 1. Introduction ...................................................................................................................................... 4 1.1 Product Overview .............................................................................................................................. 4 1.2 Features ............................
1. Introduction 1.1 Product Overview PRODUCT OVERVIEW AND FUNCTIONAL DESCRIPTION The AW-CM382 provides the highest level of integration for embedded and IoT wireless systems with integrated single-stream IEEE 802.11a/b/g/n/ac MAC/baseband/radio and Bluetooth 5.0 (Basic Rate, Enhanced Data Rate and Bluetooth Low Energy). AW-CM382 supports all rates specified in the IEEE 802.11 a/b/g/n/ac specifications. IEEE 802.
1.2 Features Integrates Cypress solutions of CYW4373 SoC Shared Bluetooth and WLAN receive signal path eliminates the need for an external power splitter while maintaining excellent sensitivity for both Bluetooth and WLAN 58.5mm(L) x 20mm(W) x 5.55 mm(H) Support internal PCB antenna 1.2.1 WLAN Dual band 802.11 a/b/g/n/ac/d/r/w/e/h/i/k Single-stream spatial multiplexing up to 433.3 Mbps Supports 20, 40, and 80 MHz channels with optional SGI (256 QAM modulation).
1.3 Specifications Table 1.3.1 General Features Description Product Description IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth Module Major Chipset Cypress CYW4373 Host Interface USB Dimension 58.5mm(L) x 20mm(W) x 5.55 mm(H) Package PCB+BTB connector Antenna Ant 1: WiFi Main (Internal PCB antenna) Ant 2: WIFI AUX (Internal PCB antenna) Weight 4.44g 1.3.2 WLAN Features Description WLAN Standard IEEE 802.
802.11a: USA – 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 2.
11ac (VHT80 MCS9) -61 -51 dBm 802.11b: 1, 2, 5.5, 11Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11n: MCS0~7 HT20/HT40 Data Rate 802.11a: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11ac: MCS0~8 VHT20 802.11ac: MCS0~9 VHT40/VHT80 WPA™- and WPA2™- (Personal) support for powerful encryption and authentication AES and TKIP acceleration hardware for faster data encryption Security and 802.
1.3.3 Bluetooth Features Description Bluetooth Standard Bluetooth 2.1+Enhanced Data Rate (EDR)/BT3.0/BT4.2/BT5.0 Bluetooth VID/PID n/a Frequency Rage 2400~2483.5MHz Modulation GFSK (1Mbps), Π/4DQPSK (2Mbps) and 8DPSK (3Mbps) Output Power Basic Rate : 7dBm +/- 3dBm (Max Settings) Min Receiver Sensitivity DH5 2DH5 3DH5 (Dirty Tx:0FF) Typ -91 -93 -87 Max -81 -83 -77 Unit dBm dBm dBm 1.3.
2. Pin Definition 2.1 Pin Map 2.2 Pin Table Pin No Definition Basic Description Voltage Type 1 5V Power supply (Default 5V.For 3.3V option,please ask Azurewave’s FAE for details) 5V PWR 2 D- Data minus of shared USB2.0 port 3.3V I/O 3 D+ Data plus of shared USB2.0 port 3.3V I/O 4 GND 5 WL_HOST_WAKE 6 GND Ground GND WLAN HOST_WAKE/GPIO_0 Ground 3.
3. Electrical Characteristics 3.1 Absolute Maximum Ratings Symbol 5V Parameter Power supply for WLAN PMU Min Max Units 0 6 V 3.2 Recommended Operating Conditions Parameter Min Typ Max Units Power supply for WLAN PMU 4.75 5 5.25 V Symbol 5V 3.3 Digital IO Pin DC Characteristics Symbol Parameter Condition Min Ty p Max Un its WIFI Digital I/O pins VIH Input high voltage VDDIO_WL =3.3V 2.0 - - V VIL Input low voltage (VDDIO) VDDIO_WL =3.3V - - 0.
4. Mechanical Information 4.1 Mechanical Drawing *Keep out distance of the print antenna is > 20mm for internal antenna option 12 The information contained herein is the exclusive property of AzureWave and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of AzureWave.
Industry Canada statement: This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence.
NOTE IMPORTANTE: Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et l'obtention d'une autorisation distincte au Canada.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
As long as all conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product.
