AW-CU288 EVB I1 User Guide V0.3 2014/07/14 Kai.
Relative Software Application Software FTDI VCP Drivers (FT2232D) Libusb-win32-bin-1.2.6.0 Cygwin Set-up Procedure 1. Download FTDI VCP Drivers (FT2232D) 2. Download Libusb-win32-bin-1.2.6.0 3. Set Up CU288 EVB for Windows 4. Install FTDI VCP Drivers 5. Install Libusb-win32-bin-1.2.6.0 6. Install Cygwin ,QVHUW ILOH ³2SHQ2&' ]LS´ By wmsdk_bundle-2.13.78) 8. Burning MCU Image with normal firmware 9. Run WIFI Normal Driver 10. Burning MCU Image with MFG firmware 11.
1. Download FTDI VCP Drivers (FT2232D) ,QVWDOO WKH GULYHU PDQXDOO\
2. Download Libusb-win32 You can get the driver from libusb-ZLQ ¶V ZHE VLWH http://sourceforge.
3. Set Up CU288 EVB for Windows The USB port connects the CU288 evaluation board to the PC.
4-1.
4-2. Install FTDI VCP Drivers Verifying Driver Installation: To verify that driver installation has completed successfully, you can open the ³'HYLFH 0DQDJHU´ ULJKW-click My Computer, select Properties). In the System Properties windows, select Hardware, Device Manager. 7ZR ³86% 6HULDO 3RUW´ VKRXOG EH OLVWHG XQGHU 0<-PC\Ports (COM & LPT) ދᐙׂᒳᇆ 7 Confidential
5-1.
5-2. Install Libusb-win32 Verifying Driver Installation: To verify that driver installation has completed successfully, you can open the ³'HYLFH 0DQDJHU´ ULJKW-click My Computer, select Properties). In the System Properties windows, select Hardware, Device Manager. One ³USB Serial &RQYHUWHU $´ should be listed under MY-PC\Ports (lib usbwin32 devices) DONE ދᐙׂᒳᇆ 9 Confidential
6-1. Install Cygwin Install Cygwin: 1. Install Cygwin from: http://www.cygwin.com/setup_x86.exe (for x86 32-bit systems) or http://www.cygwin.com/setup_x86_64.exe (for x86 64-bit systems) 2. Select the option Install from Internet 3. Use default installation path: c:\cygwin. If you chose an alternate installation directory, please make sure that there are no spaces in the path. 4. Pick the Local Package Directory (this is the download cache directory) 5. Select the option Direct Connection 6.
6-2.
7- ,QVHUW ILOH ³2SHQ2&' ]LS´ 8Q]LS ³&8 B2SHQ2&' ]LS´ DQG SXW ³UHDGHOI H[H´ WR & \cygwin\bin ދᐙׂᒳᇆ 12 Confidential
7- ,QVHUW ILOH ³2SHQ2&' ]LS´ 8Q]LS ³&8 B2SHQ2&' ]LS´ DQG SXW WKHP WR & \cygwin\ ދᐙׂᒳᇆ 13 Confidential
7- ,QVHUW ILOH ³2SHQ2&' ]LS´ Process C:\cygwin\Cygwin.
7- ,QVHUW ILOH ³2SHQ2&' ]LS´ Key in command : cd /cygdrive/c/cygwin/OpenOCD ދᐙׂᒳᇆ 15 Confidential
8-1. Burning Normal F/W Check config8801.txt, layout.
8-2. Burning Normal F/W Key in command : ./flashprog.sh -l layout.txt -b config8801.
8-3.
9-1.
9-2.
10-1. Burning MFG F/W Check config8801_mfg.txt, layout.
10-2. Burning MFG F/W Command : ./flashprog.sh ±l layout.txt ±b config8801_mfg.
10-3.
11-1.
11-2.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna.
Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence.
This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required.
installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains IC: 6100A-CU288”. Plaque signalétique du produit final Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où l'antenne peut être installée de telle sorte qu'une distance de 20cm peut être maintenue entre l'antenne et les utilisateurs.
低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機,非經許可,公司、商 號或使用者均不得擅自變更頻率、加大功率或變更原設計之 特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信; 經發現有干擾現象時,應立即停用,並改善至無干擾時方得 繼續使用。 前項合法通信,指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波 輻射性電機設備之干擾。 模組認證: 1. 本模組於取得認證後將依規定於模組本體標示審驗合格標籤。 2.