*** Caution *** Changes of modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment。
BLUETOOTH® CAR KIT - User Guide Page 1 of 37
BLUETOOTH® CAR KIT - User Guide Table of Contents Chapter 1 1.1 1.2 Package Contents ............................................................................................................ 4 Controls ........................................................................................................................... 5 Chapter 2 2.1 2.2 2.3 For Siemens Phones ............................................................................................ 15 Pairing ..............................
BLUETOOTH® CAR KIT - User Guide 7.8.1 Phonebook............................................................................................................. 22 7.8.2 Settings .................................................................................................................. 22 7.8.3 Voice Recognition................................................................................................. 23 7.8.4 Erase Memory ...........................................................................
BLUETOOTH® CAR KIT - User Guide Chapter 1 Introduction Thank you for purchasing the Bluetooth® Car Kit. The hands-free Car Kit with voice recognition equipped with Bluetooth® radio technology. Get ready to communicate on the go like never before. The Car Kit is an innovative Bluetooth® solution, which will change the way you speak while you are in your car.
BLUETOOTH® CAR KIT - User Guide 1.2 Controls Figure 2 shows the various controls of the Bluetooth® Car Kit.
BLUETOOTH® CAR KIT - User Guide Chapter 2 Installation and Operation The Car Kit operates: • • In half-duplex mode, when the external microphone is not used. In full-duplex mode, when the external microphone is used. Both modes of communication are included in the system. The internal microphone is not fully separated from the loudspeaker thus allows only half-duplex calls. This means that only one party can speak at a time.
BLUETOOTH® CAR KIT - User Guide Chapter 3 Using the Bluetooth® Car Kit 3.1 Connecting the Car Kit Connect the Car Kit to the cigar lighter and switch on the car ignition. A blue light at the Bluetooth® logo indicates that your Car Kit is connected. IMPORTANT: The first time you connect your car kit, you will hear the words << Please pair device >>. If this is not the case, reset the system by holding the red and green buttons down simultaneously for at least 2 seconds.
BLUETOOTH® CAR KIT - User Guide NOTE: Your phone must be ON, Bluetooth® must be enabled and paired to the Car Kit in order for your Car Kit to work. 3.3 • • • 3.4 • • • 3.5 • 3.6 • 3.7 Making calls using voice recognition Press the green button once. You will hear a beep from the Car Kit and from the mobile phone. Say the name of the person you wish to call after the beep. (Example: Press the green key [Car Kit beeps, telephone beeps], Nicholas; To hang up, press the red key).
BLUETOOTH® CAR KIT - User Guide 3.8 Discreet mode • • • 3.9 During the call, press the green button of the Car Kit to switch from hands-free to discreet mode. The call is then sent to your phone (only for telephones with hands-free profiles). You can also activate discreet mode using your phone (refer to the instruction manual of your mobile phone). Volume control • Volume is adjusted by the side control on the Car Kit. 3.
BLUETOOTH® CAR KIT - User Guide Chapter 4 For Nokia Phones The first time when you power up the Car Kit (or after resetting hands-free), you will need to pair devices. Subsequently, all connections between your phone and the Car Kit are automatically established when both devices are within a few meters range of each other. A 'beep' is heard when the connection is established. 4.1 Pairing Check that the blue light on top of the Car Kit is ON.
BLUETOOTH® CAR KIT - User Guide NOTE: When you get into your vehicle and start the ignition, your phone will request authorization to establish the Bluetooth® connection with the Car Kit. You can bypass this request by applying the following procedure: • • • • • In the Menu, select “Bluetooth®” and press “Select”. Select “Paired Devices”. “V3.18” is displayed. Press “Options”. When you see “Set as authorized” press “Select”. Disable by selecting “No”.
BLUETOOTH® CAR KIT - User Guide Apply t h e follow in g pr oce du r e t o a ssign a voice t a g for N ok ia 3 6 5 0 , 3 6 0 0 , N - Ga ge a n d 6 6 0 0 . • • • • • Display the main Menu on your phone and select the “Contacts” icon On your phone select the name that you wish to program and press “Options”. Select “Open” and then press “Select”. Select “Details”, then “Add Voice Tag” and then press “Select”. Select “Start” and say the name that is displayed.
BLUETOOTH® CAR KIT - User Guide Chapter 5 For Philips Phones The first time when you power up the Car Kit (or after resetting hands-free), you will need to pair devices. Subsequently, all connections between your phone and the Car Kit are automatically established when both devices are within a few meters range of each other. A 'beep' is heard when the connection is established. 5.1 Pairing Check that the blue light on top of the Car Kit is ON.
BLUETOOTH® CAR KIT - User Guide 5.2 Voice Tags You can use your phone to assign voice tags to the names in your phonebook. The Car Kit allows you to use these voice tags to call your contacts. Just press the green button on the Car Kit control unit and say the name of your contact after the beep. Correct recording of the voice tags is very important. The reliability of the voice dialing system depends of the standard of the recording.
BLUETOOTH® CAR KIT - User Guide Chapter 6 For Siemens Phones The first time when you power up the Car Kit (or after resetting hands-free), you will need to pair devices. Subsequently, all connections between your phone and the Car Kit are automatically established when both devices are within a few meters range of each other. A 'beep' is heard when the connection is established. 6.1 Pairing Check that the blue light on top of the Car Kit is ON.
BLUETOOTH® CAR KIT - User Guide 6.2 Voice Tags You can use your phone to assign voice tags to the names in your phonebook. The Car Kit allows you to use these voice tags to call your contacts. Just press the green button on the Car Kit control unit and say the name of your contact after the beep. Correct recording of the voice tags is very important. The reliability of the voice dialing system depends of the standard of the recording.
BLUETOOTH® CAR KIT - User Guide Chapter 7 For Ericsson and Sony Ericsson Phones The first time when you power up the Car Kit (or after resetting hands-free), you will need to pair devices. Subsequently, all connections between your phone and the Car Kit are automatically established when both devices are within a few meters range of each other. A 'beep' is heard when the connection is established. 7.1 Pairing Check that the blue light on top of the Car Kit is ON.
BLUETOOTH® CAR KIT - User Guide Apply t h e follow in g pr oce du r e for Son y Er icsson T6 1 0 , T6 1 6 , T6 1 8 , Z6 0 0 , Z6 0 8 a n d K7 0 0 i. • Go to “Connections” and then “Bluetooth®”. • The pairing phase is launched via “Hands-free” or “My Peripherals”. For Hands-free: • Select “Hands-free” and validate by clicking on “Selection”. • When “Add a Hands-free Device?” Is displayed, validate by clicking on “Yes”. For My Peripherals: • Select “My Peripherals” and validate by clicking on “Selection”.
BLUETOOTH® CAR KIT - User Guide 7.2 Voice Tags You can use your phone to assign voice tags to the names in your phonebook. The Car Kit allows you to use these voice tags to call your contacts. Just press the green button on the Car Kit control unit and say the name of your contact after the beep. Correct recording of the voice tags is very important. The reliability of the voice dialing system depends of the standard of the recording.
BLUETOOTH® CAR KIT - User Guide 7.3 Wordspotting (keywords) When the Wordspotting function is activated, you can make a call or pick up using a simple voice command based on keywords with out having to press any buttons on the Car Kit. • • • To take an incoming call: say “Telephone”. To make a call: say “Telephone”, wait for the beep and say the name of your contact. To end the call: say “Hang Up”.
BLUETOOTH® CAR KIT - User Guide 7.7 Call a contact manually Dial a number on your phone. The call will automatically be transferred to the Car Kit. IMPORTANT: If you are making a manual call on a T68i and the conversation remians on the handset, you must set the phone up to direct all manual calls to the hands-free function automatically. • • • • • Select “Connections” in the phone menu. Press ↓ until “Bluetooth®” and press Yes”. Press ↓ until “Options” and press “Yes”.
BLUETOOTH® CAR KIT - User Guide 7.8.1 Phonebook List: Displays the list of names in your phonebook. The names to which a voice tag has been assigned are marked with a star (*). To program or reprogram a voice tag, select it and press, “Yes” to validate. Search: Allow you to search for a name using the initial. Type a letter and press “Yes” to validate. 7.8.2 Settings Volume: This function allows you to control the volume on the Car Kit. • • Click on “Yes” and use ← and → to adjust the sound.
BLUETOOTH® CAR KIT - User Guide Multi-Tel: This function is only available for phones that have a “Headset” profile, such as the R520, T39, T68m and the first T68is (with software lower than R2E). This option allows the phones to be used simultaneously in a single Car Kit session. The first phone to which the Car Kit connects will be the main phone during this session, i.e. until the Car Kit is turned off.
BLUETOOTH® CAR KIT - User Guide 7.9 Phone Configuration 7.9.1 Identifying the phone’s software The software determines the phone’s profile. To identify the software, apply the following procedure: On the homepage, use the joystick to: • Press “Right” once and click “On*”. • Press “Left” twice and click “On*”. • Press “Left” once and click “On*”. • Under “Service info”, “Software info”, the first line provides the software version. * Refer to your Ericsson phone’s instruction manual if necessary. 7.9.
BLUETOOTH® CAR KIT - User Guide 7.9.3 Car Hands-free profiles A new function, called Car Hands-free is available on the following phones: • • • • • T68i with R8A015 software or higher. T610/T618 with R1L013 software or higher. T616 with all software. Z600 with R2D001 software or higher. Z608 with R2Eoo4 software or higher. Car Hands-free allows the phone to be compatible with the Headset or Hands-free profile only (choose Connections, Bluetooth®, then Options).
BLUETOOTH® CAR KIT - User Guide Chapter 8 For Sony Ericsson Phones (P800 and P900) The first time when you power up the Car Kit (or after resetting hands-free), you will need to pair devices. Subsequently, all connections between your phone and the Car Kit are automatically established when both devices are within a few meters range of each other. A 'beep' is heard when the connection is established. 8.1 Pairing Check that the blue light on top of the Car Kit is ON.
BLUETOOTH® CAR KIT - User Guide First, you have to activate voice dialing: • • • Open the flip on your phone and select “Phone” in the toolbar. In the Edit menu, press “Preferences”. Under Voice Control, activate “Voice Dialing”. Now, record your voice tags: • • • • 8.3 • • • • 8.4 Open the flip on your phone and select “Phonebook” in the toolbar. Select a name from the list. Select “Edit” and “Edit Contact”. Select “Voice Dialing” icon, then on “Record” and speak after the beep.
BLUETOOTH® CAR KIT - User Guide 8.5 Caller ID You phone can identify the caller if they are listed in your directory and have a voice tag. To activate, apply the following instructions: • • • Open the flip on your phone and select “Phone” in the toolbar. In the “Edit” menu, click on “Preferences”. Under the Voice Control, activate the “Play Caller Name” option. NOTE: If the Caller ID option is activated, incoming calls will not ring on the Car Kit.
BLUETOOTH® CAR KIT - User Guide Chapter 9 For Panasonic Phones The first time when you power up the Car Kit (or after resetting hands-free), you will need to pair devices. Subsequently, all connections between your phone and the Car Kit are automatically established when both devices are within a few meters range of each other. A 'beep' is heard when the connection is established. 9.1 Pairing Check that the blue light on top of the Car Kit is ON.
BLUETOOTH® CAR KIT - User Guide To assign a voice tag to a name: • • • • • • • • • Go to the menu and select “Contact List”. Enter “Settings” and select “Voice Dial”. Press “Menu” and select “Add”. Go to the name you wish to add tag and press “Menu”. Then select “Recall”. The following message is displayed: Please record your voice! Press “OK” then Voice Dial Recording will be displayed. Say the name to be recorded. The message “Please record your voice again!” will be displayed.
BLUETOOTH® CAR KIT - User Guide Chapter 10 Motorola V3 The first time when you power up the Car Kit (or after resetting hands-free), you will need to pair devices. Subsequently, all connections between your phone and the Car Kit are automatically established when both devices are within a few meters range of each other. A 'beep' is heard when the connection is established. 10.1 Access the Bluetooth® interface • • • • Activate the Bluetooth® function on the phone. Enter “Hands-free”.
BLUETOOTH® CAR KIT - User Guide 10.4 Answering/Receiving a Call When the phone is receiving a call on the CAR KIT. • • • To receive a call, press the “Answer Key” once and audio will be hear from the speaker To switch calls while currently receiving a call, press the “Answer Key” button again. To switch back to the other caller, press the “Answer Key” button again. To terminate the call, press down the Off Hook Button. 10.5 Making a Call with the CAR KIT 10.5.
BLUETOOTH® CAR KIT - User Guide Chapter 11 O2 Xda Mini The first time when you power up the Car Kit (or after resetting hands-free), you will need to pair devices. Subsequently, all connections between your phone and the Car Kit are automatically established when both devices are within a few meters range of each other. A 'beep' is heard when the connection is established. 11.
BLUETOOTH® CAR KIT - User Guide 11.4 Making a Call with the CAR KIT 11.4.1 Normal dialing With your Phone you can make a call using different methods. Please refer to your PC Phone’s User Guide. The most direct method is by using the Phone keypad. • • Dial the number and wait for the call to connect. To terminate the call, press down the Off Hook Button on the CAR KIT or press “End” on the phone. 11.4.2 Redial Calls the last number dialed from the phone.
BLUETOOTH® CAR KIT - User Guide Chapter 12 Samsung Phones The first time when you power up the Car Kit (or after resetting hands-free), you will need to pair devices. Subsequently, all connections between your phone and the Car Kit are automatically established when both devices are within a few meters range of each other. A 'beep' is heard when the connection is established. 12.
BLUETOOTH® CAR KIT - User Guide 12.4 Making a Call with the CAR KIT 12.4.1 Normal dialing Use the Phone keypad. • • Dial the number and wait for the call to connect. To terminate the call, press down the Off Hook Button on the CAR KIT or press “End” on the phone. 12.4.2 Redial Calls the last number dialed from the phone. • On the CAR KIT, press and depress the “Answer” button. 12.5 Erase Memory • • • Click on “Yes” to display “Clear Memory?” Click on “Yes” to validate.
BLUETOOTH® CAR KIT - User Guide Chapter 13 Care and Maintenance This section explains the maintenance concepts and provides instructions on preventive maintenance necessary to ensure that the Bluetooth® CAR KIT is maintained at its optimum operating condition. The suggestions below will help you to fulfill any warranty obligations and to enjoy this product for many years. • Keep all enhancements out of the reach of small children. • Keep the Advanced Car Kit dry.
