Operating Manual PORTABLE LCD DVD PLAYER Model: ADVP-1303 READ THESE INSTRUCTIONS INCLUDED IN THIS IM THOROUGHLY PRIOR TO CONNECTING AND OPERATING. PLEASE RETAIN THIS MANUAL IN CASE YOU MAY NEED IT FOR FUTURE REFERENCE. THE ILLUSTRATIONS & GRAPHICS HEREIN ARE FOR REFERENCE ONLY AND SUBJECT TO CHANGE WITHOUT NOTICE. For information and support, www.stl.
IN THE BOX You should have the following items in the packaging: Main Portable DVD player / Screen Unit 1PC Slave Screen 1PC Cigarette Lighter Plug 1PC AV Cable 2PCS Remote Control (with two AAA batteries) 1PC DC power adaptor 1PC Slave Screen Power Connector Cable 1PC Carry Bag 1PC Vehicle Headrest Attachment Strap 2PCS Instruction Manual 1PC NOTE: THE ADVP-1303 COMES WITHOUT A RECHARGEABLE BATTERY! Please retain all packaging materials for when the product needs transportation.
OVERVIEW OF THE DVD PLAYER: 1. TFT SCREEN 2. REMOTE SENSOR 3. PLAY/PAUSE KEY 4. STOP/USB/SD/MMC CARD KEY 5. PREVIOUS & F_BWD KEY 6. NEXT & F_FWD KEY 7. SETUP KEY 8. SUBTITLE KEY 9. VOLUME - KEY 10. VOLUME + KEY 11. SPEAKERS 12. NAVIGATION KEYS 13. OK KEY 14. CHARGE INDICATOR 15. PHONE JACK 16. SD/MMC CARD SLOT 17. USB PORT 18. AV OUT JACK 19. POWER ON/OFF SWITCH 20. POWER INDICATOR 21. DC IN JACK 22. BATTERY DOOR (BATTERY NOT INCLUDED) 23. BRACKET 24. DISC TRAY (BEHIND THE SCREEN) 25. HANGING STRING 26.
REMOTE CONTROL UNIT 1 9 2 10 11 12 13 3 4 1. SCREEN ON/OFF & BRI/COL ADJUST BUTTON 2. TITLE BUTTON 3. PREV & F_BWD BUTTON 4. NEXT & F_FWD BUTTON 5. NAVIGATION BUTTONS 6. NUMERIC BUTTONS 7. PROGRAM/ANGLE BUTTON 8. VOLUME - BUTTON 9. MUTE BUTTON 10. SETUP BUTTON 11. MENU BUTTON 12. DISPLAY BUTTON 13. STOP & USB/SD/MMC CARD BUTTON 14. OK(PLAY/PAUSE) BUTTON 15. SUBTITLE BUTTON 16. AUDIO BUTTON 17. SEARCH BUTTON 18. REPEAT BUTTON 19. ZOOM/SLOW BUTTON 20.
PROGRAM PLAY (UP TO 16 MEMORIES) 1. Press PROGRAM during playback to display the program menu. 2. Select location(s) to be memorized via navigation buttons and then enter desired Titles/Chapters numbers via numeric buttons. Example: Track 3, press "3" Track 12, press "1" and then "2" Track 21, press "2" and then "1" 3. To start programmed playback, select PLAY on the menu; pressing PROGRAM button again to exit programming. 4.
3. The files in this folder are displayed and select your favourable track via navigation buttons and press ok button to start playback. 4. Press NEXT and PREV button to select track directly. 5. Press REPEAT button change play mode. INITIAL SETTINGS Initial settings page is for you to make your preferred settings up for your player. Once the initial settings are done they are retained in the CPU of the player until otherwise modified. COMMON PROCEDURES FOR INITIAL SETTINGS 1.
DISC HANDLING PRECAUTIONS Hold the disc by the edge so the surface will not be soiled with finger prints. Finger prints, dirt and scratches can cause skipping and distortion. Do not write on the label side with a ball-point pen or other writing utensils. Do not apply benzine, thinner, and liquid that prevents against static electricity. Be careful not to drop or bend the disc. Install only one disc on the disc tray. Do not try to close the disc tray when the disc is not installed properly.
SPECIFICATIONS Power source: AC 100-240V~60/50Hz Power consumption: 10W (Main unit) 18W (Main unit & Slave screen) TV systems supported: PAL/NTSC Operating Temperature Range: +5oC to +35oC Dimensions: 232(L)x180(W)x38(H)mm Operating Humidity Range:10 % to 75 % Compatible with AVI, MPEG4, XVID, Mp3 files. The max resolution is 576 lines for AVI, 640X325 lines for MPEG4. Discs supported: 1.
Installation of the portable DVD player in a vehicle WARNING - On no account should this unit be used by the driver of a moving vehicle, or left unsecured in the vehicle whilst driving. - If this unit is being used by a passenger, ensure that it is secured or held safely, and that it does not obstruct any safety devices (eg. Airbags, Seatbelts etc). - Some vehicles have what is known as an "Active Headrest".