OWNER'S MANUAL
10 CAUTION product and to protect it from openings must not be blocked RISK OFELECTRICSHOCK DO NOTOPEN CAUTION: TO REDUCE THE RISK OF SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO • of Graphical 11 1 Read [nstructions - All the safety and operating instructions should be read before the product is operated. 2 Retain Instructions - The safety and operating instructions should be retained for future reference.
li_l'.Iol;_lCzfivEig.,.",lzf.,_=llJ'Jh%."tl[;llI_lffo]iv_ d) ff the product the operating 24 does not operate normally by following instructions.
1 2 To assure the finest performance, carefully, Keep Install please it in a safe place this sound system dust, moisture, and/or reference, in a well ventilated, place - away fi'orn direct sunlight, cold, ventilation 30 crn on the top, 20 crn on the left and right, the back of this unit, 3 Locate this unit away or transformers 4 (i.e. a room condensation inside shock, fire, damage Avoid installing splashing. this unit may be exposed 2"1 Excessive cause injury.
Features ................................................................... Getting started ........................................................ Quick start guide .................................................... Preparation: Check the items ..................................... Step 1: Set up your speakers ...................................... Step 2: Connect your DVD player and other components ............................................................ Step 3: Press SCENE 1 button .............
Built-in 5-channel power amplifier Radio tuners • • FM/AM • XM Satellite Minimum [U.S.A. RMS output and Canada models] (1 kHz, 0.9% THD, 105 W/ch [Other power tuning and Home 8 [2) • SIRIUS Connect capability Radio Dock, tuning capability (using XM Mini-Tuner sold separately) Satellite Radio TM tuning tuner, sold separately) capability (using SIRIUS models] (1 kHz, 0.
• Supplied accessories Check that you received Installing batteries in the remote control all of the following parts. '3 Remote control Batteries (2) (AAA, R03, UM-4) Optimizer microphone AM loop antenna Indoor FM antenna • VOLTAGE SELECTOR (Asia and General models only) Caution The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local voltage plugging the power Improper setting cause damage hazard. BEFORE cable into the AC wall outlet.
The following DVD movie steps describe playback the easiest way to enjoy in your home theater. Prepare Front right Video monitor speaker Front left speaker Subwoofer Surround right speaker Center speaker the following items. Speakers Front speaker ..................................... x 2 Center speaker ................................... x 1 Surround speaker .............................. x 2 Select magnetically shielded speakers. The minimum required speakers are two front speakers.
,rr/R,'lRgril.,,,g;rBe sure to connect the left channel (L), right channel (R), '%" (red) and "-" (black) properly. Front and center speakers Place your speakers in the room and connect them to this unit. i 1 f Place your speakers and subwoofer in the room. 2 Connect speaker cables to each speaker. To th epent To the front right speaker To the front left speaker Surround speakers Cables are colored or shaped differently, perhaps with a stripe, groove or ridge. Connect the striped (grooved, etc.
Connect the video cable to the video input jack of your video monitor and the VIDEO MONITOR OUT jack of this unit. AV receiver Video monitor S Make sure that this unit and the DVD player are unplugged from the AC wall outlets. Connect the digital coaxial audio cable to the digital coaxial audio output jack of your DVD player and the DVD DIGITAL INPUT COAXIAL jack of this unit. DVD player Video input jack 4 • • , _ -_\-i_ DVD DIGITAL INPUT COAXIAL jack Connect the power plug of this unit and other
'F/R,'lRgril.,,,g;- Check the type of the connected speakers. If the speakers are 6 ohm speakers, set "SP IMP." to "6_ MIN" before using this unit (see page 21 ). • About SCENE function Just by pressing unit and one recall program according assigned to the built SCENE your button, favorite input you to the SCENE SCENE combinations button. of input can turn source and template The sources that SCENE and on sound has this field been templates sound are field programs.
• After using this unit... Press @STANDBY/ON on the front panel to set this unit to the standby mode. • "---'_YA_AHA the SCENE templates • Using various SCENE templates • Creating your original SCENE templates _' P. 31 • This unit is set to the standby mode. In the standby mode, this unit consumes a small amount of power in order to receive infrared signals from the remote control. To turn on this unit from the standby mode, press @STANDBY/ ON (or @POWER). See page 21 for details.
(U.S.A. @ HDMIjacks @ DIGITAL @ COMPONENT @ XM jack (U.S.A. @ SIRIUS (U.S.A.
|_i'll If i:I"I_I'll I" The speaker layout below shows channel audio sources. the speaker setting we recommend. You can use it to enjoy CINEMA DSP and multi- <,>>>>>>> 30 _ - , 6o_ SL Front left and right speakers (FL and FR) The front speakers are used for the main source sound plus effect sounds. Place these speakers at an equal distance froln the ideal listening position. The distance of each speaker from each side of the video monitor should be the same.
l'lllll:iill'lli _ Be sure to connect the left channel (L), right channel (R), "+" (red) and "-" (black) properly. If the connections are faulty, this unit cannot reproduce the input sources accurately. Caution • • • • Before connecting the speakers, make sure that the AC power plug is disconnected from the AC wall outlet. Do not let the bare speaker wires touch each other or let them touch any metal part of this unit. This could damage this unit and/or the speakers.
|¶'lllll:l't_|'lll- • Before connecting terminal to the SPEAKERS A speaker cord is actually a pair of insulated cables running side by side. Cables are colored or shaped differently, perhaps with a stripe, groove or ridges. Connect the striped (grooved, etc.) cable to the "+" (red) terminals of this unit and your speaker. Connect the plain cable to the "-" (black) terminals.
lqllll?'lllqli Connect one of the type of the audio jack(s) and/or video jack(s) that your input components Audio jacks and cable plugs AUDIO @ DIGITAL AUDIO (_ (White) (Red) • @ ID (Orange) Left and right analog audio cable plugs unit has depends three t Coaxial digital audio cable plug on the types of audio availability of audio jacks Connection on your other AUDIO jacks For conventional analog audio signals transmitted via left and right analog audio cables.
|_i'll If i:I"I_I'll I" • HDMI compatibility with this unit HDMI jack and cable plug HDMI Audio signal Audio signal types formats 2ch Linear PCM 2ch, 32-192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio, etc. Multi-ch Linear PCM 6ch, 32-192 kHz, 16/20/24 bit DVD-Audio, Bitstream Dolby Digital, DTS This unit's standards: • HDMI t components is based etc. DVD-Video, etc. HDMI cable plug on the following • We recommend HDMI Version Interface • interface Compatible HDMI 1.
'lqllll:i"lllqli _ Connect your TV (or projector) the COMPONENT VIDEO VIDEO MONITOR to the HDMI MONITOR OUT jack, OUT jacks, or the OUT jack of this unit. • Some video connection monitors connected fail to recognize to this unit via a DVI the HDMI audio/video signals Make sure that this unit and other HDMI components are unplugged from the AC wall outlets. • When on another HDM[ to play back HDM[ component of this unit.
[_i'll If i:I"I_I'll I" Make sure that this unit and other components are unplugged from the AC wall outlets. • Be sure to make the same type of video connections as those made for your TV (see page 15). • To make a digital connection to a component other than the default component assigned to DIGITAL INPUT jack, select the corresponding setting for "OPTICAL IN" o1""COAXIAL IN" in "INPUT ASSIGNMENT" • (see page 68).
'l'lllll:i"l(lqlF • Connecting a DVD recorder, PVR or VCR • Connecting a set-top box Satellite receiver, cable TV receiver or HDTV decoder HDMI video out o..[_.:2 _...................
i_i,lllll:l'l_l,lll - Connect the audio components as follows. • Make sure that this unit and other components are unplugged from the AC wall outlets. Connecting a CD player and a CD recorder/MD recorder • When you connect your CD player via analog and digital connection, priority is given to the signal input at the DIGITAL INPUT jack.
'lqllll:i"lllqli _ Use the VIDEO AUK jacks on the front panel to connect a game console or a video camera to this unit. 1 I components are unplugged from the AC wall outlets. Make sure that this unit and other J | This unit is equipped with the DOCK terminal on the rear panel that allows you to connect a Yamaha iPod universal dock (such as YDS-10, sold separately) or Bluetooth adapter (such as YBA-10, sold separately).
|_iqllll:l"l_lqll" Connecting the wire of the AM loop antenna Both FM and AM indoor antennas are supplied with this unit. Connect each antenna correctly to the designated terminals. In general, these antennas should provide sufficient signal strength. @ Open leverthe Insert Close the lever _.,_,._ See right for connection antenna. information of the supplied AM loop _.,_,._ The wire of the AM loop antenna and you can connect terminal. • The AM loop antenna should be placed away from this unit.
'IqIIIFP'IIIqlF • Caution If you are to use 6 ohm speakers, set "SP IMR" to "6f_ MIN" as follows BEFORE using this unit. 1 Press @STANDBY/ON on the front panel to set this unit to the standby mode. Refer to the right column for details. Press @STANDBY/ON on this unit. When before • 2 Press and hold @TONE CONTROL then press @STANDBY/ON unit. Turning on this unit (or @POWER) you turn on this unit, there this unit call reproduce to turn will be a 4 to 5-second delay sound.
|¶,(llll,_l,'l(|qll - The XM and SIRIUS SIRIUS indicator indicator lights is only up only when applicable "XM" DIG(TALl _rl PL_ to the U.S.A. or "SIRIUS" II __ iilll iilll and Canada is selected i iilll iilll models as the input and the cursor on the left of the XM indicator IN iilll STE_ iilll iilll or source. iilll iilll iilll iilll iilll FVb_'+'_ a: t21C1..............
'_'lflfl_"If|'lfF @ CINEMA Lights • DSP indicator up when you select a CINEMA field program DSP sound (see page 39). Using the remote control The remote control VIRTUAL Lights control transmits Be sure to aim the remote sensor a directional control directly infrared ray. at the remote on this unit during operation. indicator up when Virtual CINEMA DSP is active (see page 39).
This unit employs the YPAO (Yamaha Parametric Room Acoustic Optimizer) technology which lets you avoid troublesome listening-based speaker setup and achieves highly accurate sound adjustments automatically. The supplied optimizer microphone collects and this unit analyzes the sound your speakers produce in your actual listening environment. Connect the supplied optimizer microphone to the OPTIMIZER MIC jack on the front panel.
P_il_la[.mia[zlk_,Izl_.l:t:tdk_:Jiil_[.lai_l.IOlJl_'_t:lalli[.ml.I.l#r Make sure that "SETUP" and the pointer is set to "AUTO" is pointing at "START". You can also select the following setup methods. [n this case, press @A to select "SETUP", press @<:1 / 1:>to select the one of the following choices and then select "START". Choices: AUTO, RELOAD, • Select "AUTO" UNDO, to automatically settings settings.
The display changes as follows. Press @A and @ENTER setup results in detail. i:_l..ITO:[i;ETI..IF' :;J:TrL_........ '_' gTgRT to display the i:_LF[O Press @<1 /I:> repeatedly to toggle between the setup result displays. PP OC_i,:?i:hiJ._'"1'i_ O'i:: _i_].]. J.i:em [X.] [,i,'] ',;1.1_: !::,o_.,.m [ EI'4TIH:_: :1x:5[,.._"_[,. Results of the speaker connection and wiring Results of the speaker distance from the listening position INI7 Ig:_L IZ IHG ,? I.dlR IHG.LEUEL D IS TgINCE 61E E }.,.
P_il_l.t.|l.[:lk_,I@l;(:talk'_:Jiil_[.lal_l.ZelJl_']t:l.llit.ml.I.l#r 10 Press @V "SET" and then press @<1/I> to select or "CANCEL". Choices: SET, CANCEL • Select "SET" to confirm the "AUTO SETUP" • If"WARNING" appears When this unit detects potential problems during the "AUTO SETUP" procedure, "WARNING" appears in the result display. Check the warning messages to correct your speaker settings. results. • Select "CANCEL" to cancel the "AUTO SETUP" results.
This unit is equipped with 17 preset SCENE templates for various situations of using this unit. As the initial factory setting, the following SCENE templates are assigned to each SCENE button: SCENE SCENE SCENE SCENE Press QINPUT then press @< template. 1 : DVD Viewing 2: Disc Listening 3: TV Viewing 4: Radio Listening - _ the desired iNPUT ;:.
• Which SCENE template would you like to select? Which source do you like to play back? Which component do you like for playback? DVD SCENE Default SCENE buttons templates DVD Viewing (DVD video, Recorded video) _<_[ Video sources DVD Movie Viewing DVD Live Viewing _f DVR DVR Viewing DVD Disc Hi-fi Listening or DVD-Audio) Music discs (CD, SACD Music Disc Listening Disc Listening CD CD Hi-fi Listening CD Listening CD Music Radio programs TUNER component _.
• Preset SCENE templates descriptions The illustrations of the SCENE button in the following table indicate the assigned SCENE buttons in the default setting.
3 You can create your original SCENE templates for each SCENE button. You can refer to the preset 17 SCENE templates to create the original SCENE templates. You can adjust the following parameters for a SCENE template: • Customizing the preset SCENE templates Use this feature to customize the preset SCENE templates.
• Controlling the input source components in the SCENE mode You can operate both this unit and the input source component by using the remote control. You must set the appropriate remote control code for each input source in advance 1 (see page 75). Press the desired @SCENE remote control.
Caution Extreme caution back CDs encoded encoded should be exercised Rotate @VOLUME (or press @VOLUME +/-) to adjust the volume to the desired output level, 6 Press @PROGRAM <1/I> repeatedly (or press @AMP and then @PROG <1 It> repeatedly) to select the desired sound field in DTS. If you play back a CD in DTS on a DTS-incompatible you will only hear some unwanted damage your speakers. Check supports CDs encoded in DTS.
g-amq,N-qi This unit feature comes (audio with a variety input jacks when more same input source. jack than of input select) one jacks. to switch input jack Use this between is assigned input to as the Use this feature to select the component connected to the MULTI CH INPUT jacks (see page 18) as the input source. Press @INPUT --'4'-• We recommend ill most cases.
i_r'rlv,7;r4: You can display the operating information of this unit on a video monitor. 1 Turn on the video monitor connected to this unit. 2 Press _DISPLAY. Connect a pair of headphones with a stereo analog audio cable plug to the PHONES jack on the front panel. The current status screen appears in the OSD. :!!;7 gIT{.IS U0L: -'4@dB OUO M,>..de Uiewir, g MOUIE _i{=rSE[. _ HO{r!l NII]i.{[: CIi'_liMg (MID;= l[.[ You can select displayed "OPTION the amount in the OSD MENU" ,11 .,, io f..
lumq,_i • You can combine a video image from a video source with sound from an audio source. For example, you can enjoy listening to classical music while viewing beautiful scenery from the video source on the video monitor. Audio information F0{::4'.M{:::{] Signal format. When this unit cannot detect a digital signal, it autonaatically switches to analog input. '.iii;{:::{{"{{:::'{.... ][ {"{G The mnnber (]:HIZI{".{{".
i/Flv,7_r4: Use this feature to automatically set this unit to the standby mode after a certain amount of time. Press _AMP and then press _SLEEP repeatedly to set the amount of time. Each time you press _SLEEP, the front panel display changes as shown below. The SLEEP indicator flashes while you are switching the amount of time for the sleep timer. Once the sleep timer is set, the SLEEP indicator lights up in the front panel display, and the display returns to the selected sound field program. _%,.
This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from almost any stereo or multi-channel sound source. Press OPROGRAM <1 It> (or press @AMP then press @ PROG <1/t> repeatedly). and The name of the selected sound field program appears in the front panel display. • When you select the last sound source.
-'l,lqtl,dlFlOlpil;,,_,l_.,,_: • Enjoying 2-channel sources using the standard decoders Signals input from 2-channel sources can also be played back on multi-channels. Press @AMP and then press @SUR. repeatedly to select a decoder. DECODE You can select from the following decoders depending on the type of source you are playing and your personal preference. {:::'!o {...,:.:,'i:.ii :[,:.: Dolby Pro Logic processing for any Sotlrces {:::'{... ]i]i {"{O'...' :i.'2 !" !....!, .!, !'{L.E::..!, % l'.
!..'_.i ,u r. I/1_l'i1.ioi. ;(ql i l: • Editing sound fields parameters You can enjoy good quality sound with the factory default parameters. Although you do not have to change the initial settings, you can change some of the parameters to better suit the input source or your listening room. Initial settings are indicated ill bold under each parameter. For Pop/Rock, Hall, Jazz, Game, TV Sports, Movie Spacious and Movie Dramatic: DSP level [)'.iii:PL.Ei,iEL.
Use the DIRECT mode to enjoy the high quality sounds of the selected source. When the DIRECT mode is activated, this unit plays back the selected source with the least You can adjust the output level of each speaker while listening to a music source. This is also possible when playing sources input at the MULTI CH INPUT jacks. circuitry. Press @DIRECT @DIRECT) (or press @AMP and then This operation will override the level adjustments made in "AUTO SETUP" (see page 24) and "SP LEVEL" (see page 65).
The night listening modes are designed to improve listenability at lower volumes or at night. Press _AMP and then _ NIGHT to select "NIGHT:CINEMA" or "NIGHT:MUSIC". repeatedly Choices: NIGHT:CINEMA, NIGHT:MUSIC, OFF • Select "NIGHT:CINEMA" when watching films to reduce the dynamic range of film soundtracks and make dialog easier to hear at lower volumes. • Select "NIGHT:MUSIC" when listening to music sources to preserve ease-of-listening for all sounds.
There are 2 tuning methods: automatic and manual. Automatic tuning is effective when station signals are strong and there is no interference. If the signal from the station you want to select is weak, tune into it manually. You can also use the automatic and manual preset tuning features to store up to 40 stations. Automatic tuning is effective when station signals are strong and there is no interference. Press @INPUT <1 It> repeatedly so that "TUNER" is displayed in the front panel display.
You can use the automatic preset tuning feature to store FM stations with strong signals up to 40 (A1 to ES: 8 preset station numbers in each of the 5 preset station groups) of those stations in order. You can then recall any preset station easily by selecting the preset station number. You can also store up to 40 stations (AI to ES: 8 preset station numbers in each of the 5 preset station groups) manually. 1 Tune into a station automatically or manually. See page 43 for tuning instructions.
You can tune into any desired station simply by selecting the preset station group and number under which it was stored. You can exchange the assignments of two preset stations with each other. The example below describes the procedure to exchange preset station "El" with "AS". When 1 performing @TUNER this operation to select "TUNER" with the remote as the input control, press source. Select preset station "El" using @A/BIClDIE and @PRESET/TUNING/CH <1 / _>.
XM Radio offers an extraordinary variety of commercial-free music, plus the best in premier sports, news, talk radio, stand-up comedy, children's and entertainment programming. XM is broadcast in superior digital audio quality from coast to coast. From rock to reggae, from classical to hip hop, XM has something for every music fan. XM Satellite Radio For U.S. customers: For Canadian online customers: The XM Satellite information http://www.xmradio.com/ Radio http://www.xmradio.
:lirjB.'._FJIllF:'J.'ET;ll'_elamr° Once you have installed the XM Mini-Tuner Dock, inserted the XM Mini-Tuner, connected the XM Mini-Tuner Dock to your XM Ready® home audio system, and installed the antenna, you are ready to subscribe and begin receiving XM programming. There are three places to find your eight character XM Radio ID: on the XM Mini-Tuner, on the XM Mini-Tuner package, and on XM Channel 0. Record the Radio ID in the following eight squares for reference.
• ,'_-]ll'J_[ J[,ZI Iillii. Before performing operations, press @XM to select "XM" as the 3 input source, Press @PRESET/TUNING/CH (or PRESET/CH A /V) repeatedly to change the preset channel number (1 to 8). • All Channel Search mode 1 Press @SEARCH MODE (or _SRCH MODE) repeatedly to select "ALL CH SEARCH". You can also select the preset channel number directly by pressing the numeric buttons ( 1to 8) on the remote control.
,_lir/_,"_ltJIl'_-l='r_P;l'_lIllllli[, _" 3 You can use this feature to store up to 40 XM Satellite Radio channels (A1 to E8:8 preset channel numbers in each of the 5 preset channel groups). You can then recall any preset channel easily by selecting the preset channel group and number as described in "Preset Search mode" on page 48. Currently J Selected 4 =.'., _"_ _..E selected channel Press @CATEGORY (or @A-E/CAT.
p_jrjlF; • " ;'_-]ll'J_-'_faT _ eIilIiE. i[,zli You can display the XM Satellite Radio information (such as channel number, channel name, category, artist name, or song title) for the currently selected channel in the front panel display or in the OSD. If a status message o1"all error message appears in the front panel display o1"ill the OSD, see the "XM Satellite Radio" section ill "Troubleshooting" on page 82 for appropriate remedies.
SIRIUS Satellite Radio provides over 130 channels of exclusive entertainment and 100% commercial-free music. Only SIRIUS has more than 65 original music channels, from today's hits to R&B, oldies and classical masterpieces. From authentic country and real bluegrass to cool jazz, hot latin, reggae, rock and many more. Best of all, it's all 100% commercial-free. SIRIUS also has more than 55 channels of world-class sports, news and entertainment.
Before using the SIRIUS Satellite feature, you need to activate your SIRIUS Satellite Radio subscription. To activate the subscription, you need the Sirius ID, which is uniquely assigned to the SiriusConnect tuner. Sirius ID is 12-digit number and it appears on the package of the SiriusConnect tuner, on the label of the SiriusConnect tuner and when you tune into the SIRIUS Satellite Radio Channel "0" (see below). • Press @INPUT (or press (@SIRIUS) to select "SIRIUS" as the input source.
_]l : l l ll_']_'r_ t':Jllll rgll gr'TT_ li'gMaJ l_Tit h,t , • Before performing the following operations, press _SIRIUS. Search mode • All Channel 1 Press ®SEARCH MODE (or _SRCH MODE) repeatedly to select "ALL CH SEARCH". 1 Press ®SEARCH MODE (or _SRCH MODE) repeatedly to select "PRESET SEARCH". 2 Press @PRESET/TUNING/CH (or @ PRESET/CH A / V) repeatedly to search for a channel within all channels. 2 Press @CATEGORY (or @A-E/CAT.
Before performing the following operations, press _SIRIUS. Press @PRESET/TUNING/CH <1 / (or @ PRESET/CH A / V) repeatedly to select a preset channel number (1 to 8) while the MEMORY indicator is flashing, The preset channel number appears in the front panel display. You can use this feature to store up to 40 SIRIUS Satellite Radio channels (A1 to E8:8 preset channel numbers in each of the 5 preset channel groups).
_I ."I I I ._'_J_'_F'31nEEE."{IT_R;',,g_J_3TEIl i r, Press @V repeatedly to select "OPTION MENU" and then press @ENTER. In the SIRIUS outputs is locked. Press @/\ / V repeatedly to select "G)SIRIUS SET" and then press @ENTER. The following menu screen appears. Satellite the sound Only the first eight name are displayed 10 :?; OPTION }}ENI..I Radio channel of the selected Press @ENTER channel. channel characters list screen, this unit even if the channel of each channel in the list.
Before performing the following operations, press _SIRIUS. You can display (such as channel name, composer selected channel • The front panel display can indicate up to 14 alphanumeric characters at once. You can set whether to display the SIRIUS Satellite Radio information in the front panel display in a continuous manner or by 14 alphanumeric characters at once by using the "FL SCROLL" parameter in "OPTION MENU" (see page 70).
Once you have stationed your iPod in a Yamaha iPod universal dock (such as YDS-10, sold separately) connected to the DOCK terminal of this unit (see page 19), you can enjoy playback of your iPod using the supplied remote control. You can also use the Compressed Music Enhancer mode of this unit to improve the sound quality of the compression artifacts (such as the MP3 format) stored on your iPod (see page 19). • Only iPod (Click and Wheel), iPod nano, and iPod mini are supported.
ll_,,_Wlii_lll' • Controlling mode iPod in the menu browse You can perform the advanced operations of your iPod using the supplied remote control when you connect this unit and a monitor using the VIDEO connection. You can browse the songs stored on your iPod in the OSD. Further, you can change or adjust settings for your iPod to suit your personal preferences. Shuffle Use this feature to set this unit to play songs or albums in random order.
You can connect a Yamaha Bluetooth adapter (such as YBA-10, sold separately) to the DOCK terminal of this unit and enjoy the music contents stored in your Bluetooth component (such as a portable music player) without wiring between this unit and the Bluetooth component. You need to perform "pairing" the connected Bluetooth adapter and your Bluetooth component in advance.
Recording adjustments instructions • When • The source • The SIRIUS • Digital source • A given • Once Radio component audio • Check laws.
You can use the following parameters in "SET MENU" to adjust a variety of system settings and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment. • Auto setup !:::!LirO:iii:Eri..iP Use this feature to automatically adjust speaker and system parameters (see page 24). • Manual setup {,i{:::!i..ii...i!:::!i... :iii;Eri...iP Use this feature to manually adjust speaker and system parameters.
IF#_ljff_i'i j Option menu 3 0F'[]i0bi !:::!)[)]i '.iii;i:::'L.!:::!Y *.iii;iiiiTr iqENU Adjusts the brightness of the front panel display information is displayed. 70 ii:.i: )MEMi[)i:*;'.Y (:.iiU!:::!i:;;'.[) Locks sound field program i":3 i:i:iiii"?r ii *:::;i:::i i:::i:T ......................................... Designates the default audio input jack select setting tUr the input sources DIGITAL INPUT jacks when you turn on the power of this unit. [) )i:::G:::!i:;;'.
,l_llJff=ri'l_ Use this menu to manually compensate adjust any speaker for video signal processing LCD monitors settings delays or when using Woofer section of a speaker is 16 cm (6.5 in) or larger: large Woofer section of a speaker is smaller than 16 cm (6.5 in): small or projectors. Front speakers oI,iF4i_l.._gi.. SErUp oMF#_I.._gL :::;ETUP :1.SOLIN[:, MENU :1..2 :1.SOUbltMENU ':, FOSPEFIKER SET S ::,5P LEUEL {}},Sls t ZS1¢*NC!iT D)CEbFfER GEQ }7{) !..FE !..EUEL [.£] . [,iq ::L.i_:_ .
Surround left/right speakers :iii;UR,= LiR SP Choices:NONE, SML, LRG -1. %Lli.,l[:, MENU !q"NE :::SML Crossover f"i::q"i =.,." F', L.' C" =.' C" ,..' f"fi L."v"i i:::"D L,, V. Use this feature to select the crossover frequency of all the speakers set to "SML" (or "SMALL") in "SPEAKER SET" (see page 63). All frequencies below the selected frequency will be sent to the subwoofer or front speakers depending on the setting of "LFE/BASS OUT" in "SPEAKER SET" (see page 63).
_=lllliff=ri'|_ • Speaker level E:;,6F' L.Et,qEL Use this feature to manually adjust the output level of each speaker. Control range: -10 to +10 dB Control step: 1 dB Initial setting: 0 dB 1 :i;OUt@IIEHU S;,SP I I,,EUEL ....... '_ FRo I..il! FR,, R--li-_'i:HTR--li-- :1..-2 :!;Ol..IH!:)HEHU S;,SP LEUEL ..... ............. .:,'[5UR ,rL--{I-:i;I..IR,,R--ii-- k - :i;k_rm:--H-_g ag • Speaker distance C ::,:iii;l:::' D i :iii;T!:::ff..
IFF_liff:_iP • Center speaker equalizer ilI:,I:,CEHTERGE(;:! Use this feature to adjust the built-in 5-frequency band (100Hz, 300Hz, lkHz, 3kHz and 10kHz) graphic equalizer for the center channel so that the tonal quality of the center speaker matches that of the front speakers. You can make adjustments while listening to the currently selected source component or a test tone. • Dynamic range i:::::,D'.,.
Maximum volume N!:::!::.:: i...K)i ...... Use this feature to set the maximum volume level. This feature is useful to avoid the unexpected loud sound by mistake. For example, the original volume range is +16 dB to -80 dB. However, when "MAX VOL." is set to -5 dB, the volume range becomes -5 dB to -80 dB. • HDMI set H;,H[;,Ni :iii:ET Use this feature to select the component to play back HDMI audio signals.
IFFilJff:_iP For HDMI i...ii Use this menu to reassign decoder mode or rename the input jacks, select jacks i : ::.,. ii,i: : .l. i i'..i .:, : : i I ,I, I- 11% I,,I ,I, I I 1 and 2 :,..:,i .,li ,,,,, ,,I !"!L.q'!.!. 2!"! LZ." the Choices: the input source. (1) OVO, DTV/CBL, V-AUX, DVR DTV/CBL, V-AUX, DVR (2) DVD, . It*'-:}bll..ll::fl.. SETI..IF' 2 2 !I,.IF:'LFf HEHU ':, _:0 IbIPU-f i:_SSISHt'1EH-[ S ;, I HPI.JT REHI:It'IE {; ;,_.._()l., t.
:l_lliff_i'l , 4 Repeat steps 1 through 3 to rename each input source. 5 Press _ENTER RENAME". to exit from "INPUT • Volume trim C)UOLUHE TRill Use this feature to adjust the output volume of each source. This is useful if you want to balance the level of each input source to avoid sudden changes in volume when switching between input sources. Choices: CD, MD/CD-R, TUNER, DVD, DTV/CBL V-AUX, DVR, DOCK, MULTI CH, XM, SIRIUS Control range: -6.0 to +6.0 dB Control step: 1.0 dB Initial setting: 0.
IF]_l(a:_iP Source feature OSD display time U1:.:,!.._ -.1:.:, UU !.,:: L.!._ ___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Use this menu to adjust the optional system :i_ OF'TIO_'_ MIH,_I,.I :1,,-2 :30F'TIOhl ':, gODISPL.i:_? :i!;ET S 1:, blEMOR"/ SI..li:_R[:, I11:1:, It:}l. ] DI I[[[I:_;E[.
• Audio select (:::::, #J[:,:[ 0 :i;i;ELE(:::T Bluetooth setting E::,iiii:LLiETOOTH :iii;ET Use this feature to designate the default audio input jack select setting for the input sources when you turn on the power of this unit. Choices: AUTO, LAST :30Fq-]:Oi'.l >-_:<1 TO • }'lEi'41..I [:* ::=P{7:}R _:_M ,, [:ENTER ] _E_"_te_ I.._:_:{; T • Parameter initialization [::,::, P!:::!R!:::!M,= :[H:[ Use this feature to set all the parameters of the sound field programs to the initial factory settings.
IF]_lJff_iP • XM Radio setting i:::::,:?:;H RAil:, i O :iii;ET (U.S.A. and Canada models only) 11_OPTION _lEi'41.1 F::=Xbl R_:II)!O :!i_liilT :;:',1_1 _iI-fli;i4iIi;4,,, lii_!_i;;-;; [:ENTER ] ::Re i:.c_._,, XM Radio antenna ..... _.,._ c,_..rn:::_..,.._,, Use this feature to check the current receptkm level of the XM Satellite Radio signals. For the best reception, orient XM Mini-Tuner so that a value of 60% or more is displayed here.
In addition to controlling this unit, the remote control can also operate other audiovisual components made by Yamaha and other manufacturers. To control your TV or other components, you must set up the appropriate remote control code for each input source (see page 75). • Controlling this unit Press @AMP to control this unit. • Controlling a TV Press @DTV/CBL to control your TV. To control your TV, you must set the appropriate remote control code for DTV/CBL (see page 75).
• Controlling other components Press one of the input selector buttons ((_)) or A to C buttons to control other components. You must set the appropriate remote control code for each input source in advance (see page 75). The following table shows the function of each control button used to control other components assigned to each input selector button. Be advised that some buttons may not correctly operate the selected component. [4],,,,,,,,_ \_' k) .? v/' _%,.
While pressing and holding one of the input selector buttons (@) on the remote control to select the input area you want to set up, press @AV POWER for more than 3 seconds. You can control other components by setting the appropriate remote control codes. For a complete list of available remote control codes, refer to "List of remote control codes" at the end of this manual.
This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment. • Only @STANDBY/ON, @STRAIGHT @PROGRAM • Speaker impedance :iii;i:::'i Mi:::'== (U.S.A.
• Tuner frequency step ..... U (Asia and General models only) Use this feature to set the tuner frequency step according to the frequency spacing in your area. Choices: AM 10/FM 100, AM9/FMS0 • Select "AMI 0/FM100" for North, Central and South America. • Select "AM9/FMS0" for all other areas. • Initializing iHii== Use this feature to reset all the parameters of this unit to the initial factory settings (see page 87). Choices: CANCEL, RESET • Select "CANCEL" not to reset any parameters of this unit.
Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. • General This unit fails to turn on or enters the standby mode soon The power cable is not connected plug is not completely inserted. afterthe poweris The speaker impedance incorrect.
The sound goes off. suddenly The protection circuitry has been activated because of a short circuit, etc. Check that the impedance 21 setting is correct. Check that the speaker wires are not touching other and then turn this unit back on. The sleep timer has turned off this unit. Turn on this unit, and play the source again. The sound is muted. Press _MUTE or @VOLUME each +/- to resume audio 35 output. Sound is heard from the speaker on one side only. Incorrect cable connections.
|J_ETT_IIIEr. Dolby Digital or DTS sources cannot be played. (Dolby Digital or DTS indicator in the front panel display does not light Tile connected component is not set to output Dolby Digital or DTS digital signals. Make an appropriate setting follo'_,ing tile operating instructions Ibr your component. -- Audio input jack select is set to "ANALOG". Set Audio input jack select to "AUTO". 34 Incorrect Connect persists, -- up.) A humming heard, sound is cable conuections.
• Tuner FM stereo reception is noisy. The characteristics of FM stereo Check the antenna broadcasts may cause this problem when the transmitter is too far away or the antenna input is poor. Try using a high-quality antenna. Use the manual FM AM There is distortion, and clear reception cannot be obtained even with a good FM antenna. There is multi-path The desired station cannot be tuned into with the automatic tuning method. The signal is too weak.
• ×M Satellite If an operation takes Radio kruger than usual or an error occurs, one of the following display. In this case, read the cause and follow the corresponding ('.i:{"{[:.i)i'.i:{'::i ':.:'{v{'iU{".{[:.ilR The XM Mini-Tuner is not installed in the XM Mini-Tuner Dock or the XM Mini-Tuner Dock is not connected to this unit. ('.i:{"{[:.i)i'.i:{'::i {:::{{".{m[:.ii{".{{".
• SIRIUS Satellite Radio If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel display. In this case, read the cause and follow the corresponding remedies. {:::{{...{r[:.i]...{{...{{:::{ [:.i]:4,.{:4,.(){::ii The antenna is not connected SiriusConnect ('.i:{"{[:.i)]{'::i =.i:.i;R. 'rLi{..{[:.i]:4'. i..i()r to the Check the connection tuner properly.
ImEigO_ F-NE27!_ I IE(, • AUTO SETUP Before AUTO SETUP ('.i:O!"!!"!_!:.!:C.'iL. {':'{ ]i('.i:! Optimizer U!"!F:"1 L.)g i"ii:::'! Headphones microphone is not connected. are connected. Connect the supplied optimizer microphone to the OPTIMIZER MIC jack on the front panel. 24 Unplug -- the headphones. During AUTO SETUP {i:.ii"" i i) {"i0 {:::i:;?.0i".H '.i:.i;i:::' Front L/R chalmel ii:.ii'"2 ','=i"i0 A surround '.i:.i;i..ji::?. =='.i:.i;i:" [iii""'::i" ','=i"i0 i['.
After AUTO W"" i ',',0U"i" SETUP 0{ :7 {:::'{"{{z{'.i:.i;[i. {._.b"'2',',0i.)[:.i]::4 '. 2,::i.rq < ',i.i',@!:"il. i:, Speaker polarity is not correct. This message may appear depending on the speakers even when the speakers are connected correctly. Check the speaker connections polarity (+ or ). The distance Bring the speaker closer to the listening between and the furthest range. W"'3 ',',L.Ei.)[:.i]... [:.i]:4'.{:,?.
• Bluetooth S,!:_,.!:_!",::.h :ing ...... The Bluetooth adapter and the Bluetooth component is ill the middle of the pairing. The Bluetooth adapter and the Bluetooth component is in the middle the connection. ('.i:OV!F:"1 _!:.!='ii._!:.!=d The paring is completed. ('.I:.!:.!H"!_:"._!:.! =1 _!:.!=_:'.:i The paring :.,.. -:- _...:_ : : ," ,",v',v',,:::=," "r,:::=,"._ of establishing is canceled.
_l'g_f_fffP • Remote control The remote control does not work nor function properly, Wrong distance Tile remote control functions "adthin a maximnnl range of 6 m (20 It) and no more than 30 degrees off-axis t_om the front panel. or angle. Direct sunlight or lighting inverter type of fluorescent (from an lamp, etc.) is striking the remote control unit. sensor of this The batteries The remote set. are weak. control Reposition Replace code is not correctly 23 this unit. all batteries.
• CINEMA DSP Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best felt in a theater having many speakers designed for acoustic effects. Since home conditions, such as room size, wall material, number of speakers, and so on, can differ so widely, it is inevitable that there are differences in the sound heard.
• HDMI • HDMI (High-Definition Multimedia Interface) is the first industry-supported, uncompressed, all-digital audio/video interface. Providing an interface between any source (such as a set-top box or AV receiver) and an audio/video monitor (such as a digital television), HDMI supports standard, enhanced or high-definition video as well as multi-channel digital audio using a single cable.
AUDIO SECTION • Signal Level Composite Component • Mininmm RMS Output Power t_r Front, Center, Surround [U.S.A. and Canada modelsl 1 kHz, 0.9% THD, 8 f2 ................................................... [Other models] 1 kHz, 0.9% THD, 6 f2 ................................................... • Maxinmm Power t_r Front, Center, Surround (JEITA) 1 kHz, 10% THD, 6 f_ ....................................................... • Dynamic [U.S.A. (IHR [Other (IHE • Total Harmonic ............................
• Symbols C)SP XM tuning status message DISTANCE, ................. status • Numerics l SOUND Manual MENU, setup Manual 2ch Stereo, 3 OPTION Sound MENU 3 OPTION MENU, 5ch Stereo, Sound • ........ 61 setup .......... 61 field program ......... 38 ............................... 70 Manual setup ....... 62 field program ......... 38 A A)DISPLAY SET, Option A)INPUT menu ......... 70 ASSIGNMENT, Input menu SET, Sound A.
ENHANCER indicator Exchange, Preset ........................ 22 station, FM/AM tuning ................................. External decoder connection ................ • 45 18 Jazz, Sound OFF AIR, • L 66 F)XM RADIO SET .............................. 72 F/W UPDATING, SIRIUS Satellite Radio status message Factory ................................. presets, FL SCROLL, FM antenna 83 ......... 77 Speaker ........................
• S SPEAKER, SCENE ................................................... SCENE template Searching selection Speaker, ..................... status message ................. 86 ................ 34 Selection, Selection, Audio MULTI Selection, CH INPUT component Preset station, input jacks tuning ...... 34 ................................. 45 Selection, SCENE template ................... SET MENU .......................................... 61 Setting remote control codes .............
• Front panel
• Remote control ® @ ® ii
List of remote control codes MBO Blu-ray player Medi..... Samsung Micromaxx Micromedia 2137 CD player Yamaha Microstar 5000. 5013 Mitsubishi Mizuda CD Recorder Muslek Yamaha Naiko 5001 Onkyo DVD Orava Acoustic Solutions 2078 Aiwa 2055.2100 Akai 2096 P&B Pacific Panasonic Akura Alba 2076 2078. 2086 Philips Apex Awa Axion Brainwave Brandt Broksonic Bush Centrex Classic Clatronic 2027, 2049 2078 2078 2096 2073, 2085 2060 2075.
Akai Akiba Akura Alaron Alba ALBIRAL Allstar Amplivisinn Amstrad Amtron A ham Anam National 0059, 0129, (/204, (/213, 0255 (/209, 0206, 0200 0065, 0130, 0208, 0217, 0127, 0200.
Lencn Lenoir Lesa Leyco LG Liesenk Lift-" Lifetec Loewe Loewe Opta Logik Lu ma Lumatron Lux May Luxman Luxor LX1 Magnadyne Magna f_m Magnavox Magnum Majestic Mandor Manesth Marantz Marelli Mark Matsui Mediator Medion Megatron Melectronic Memorex Memphis Metz MGA Micromaxx Microstar Minerva Minoka Mitsubishi Mivar Montgomery MTC Multi System Multitech Murphy NAD Naonis v (/208 (/207, 0208 (/214 0206, 0213, 0217 0016.0038,0039. 0127,0128.0157. (/158, 0163, 0164. (/166, 0188, 0189. 0200, 0201,0207.
Tan@ Tashiko Tatung TCM Teac Tec Techwood Teknika Teleavia Telecor Telefi+mken Telegazi Teletech Teletnn TelevMenn Tensai Tesmet Tevion Texet Thomson Thorn TMK Tokai Tokyo Toshiba Towada Transtec Trident Tristar Triumph Uher Ultravox United Universum Univox Vestel Vexa Victor VIDEOLOG1C Videologique Videosat VideoSystem Videotechnic Vidtech Viewsnnic Visiola Visinn Vortec Voxsnn Waltham Wards Watsoll Watt Wega Radio 0127, 0207, 0209, (1211,0218 0200, 0207, 0210 0127, 0204, 0207, 13213, 0217, 0237 020
Memorex 1001, 1004, 1(/13, 1045, 11150 1(148 1{/14 Memphis Metz MGA 1002, 1003, 1005, 1008, 1014.
OYAMAHA HTR-6140 The circled numbers and alphabets correspond to those in the Owner's Manual. Les nombres et lettres dans un cercle correspondent _ ceux du mode d'emploi.
• Remote control/Bo_tier de teldcommande @ @ ® YAMAHA CORPORATION Printed in China c WN26230