Other Content

ManualsBrandsAxxess ManualsAmplifier HarnessesMetra TYTO-01 JBL Amplifier Interface Harness

INSTALLATION INSTRUCTIONS FOR PART TYTO-01

METRA. The World’s best kits.™ metraonline.com1-800-221-0932

REV. 4/4/2014 INSTTYTO-01

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

• Providesaccessorypower(12-volt10-amp)

• Usedinamplifiedsystems

• Highlevelspeakerinput

• USBupdatable

• Retainsbalanceandfade

KIT FEATURES

•Cuttingtool•Crimpingtool•Tape•Connectors

(example:butt-connectors,bellcaps,etc.)

TOOLS REQUIRED

Toyota amplified interface

2001-up

T Y T O-01

APPLICATIONS

See inside front cover

•TYTO-01interface•16-pinharnesswith

strippedleads•14-pinto20-pinharnesswith

strippedleads

INTERFACE COMPONENTS

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART TYTO-01 TYTO-01 Toyota amplified interface 2001-up APPLICATIONS See inside front cover INTERFACE COMPONENTS • TYTO-01 interface • 16-pin harness with stripped leads • 14-pin to 20-pin harness with stripped leads TOOLS REQUIRED • Cutting tool • Crimping tool • Tape • Connectors (example: butt-connectors, bell caps, etc.) KIT FEATURES • Provides accessory power (12-volt 10-amp) • Used in amplified systems REV.
PAGE 2
TYTO-01 Connections to be made Applications Lexus ES330 ES300 IS300 LS430 RX330 RX350 RX400H 2004-2006 2002-2003 2002-2005 2001-2006 2004-2006 2007-2009 2006-2008 ToyoTa 4-Runner (excludes Urban Runner) Avalon Camry Corolla FJ Cruiser Highlander Matrix Prius Prius (3rd gen/PHV) Rav4 Sequoia Sienna Solara Tacoma Tundra Tundra (double cab) Venza (without NAV) Venza From the 16-pin harness, to the aftermarket radio: • Connect the White wire to the left front positive speaker.
PAGE 3
TYTO-01 Installing the TYTO-01 Connections to be made From the 20-pin harness, to the aftermarket radio: • With all connections completed to the aftermarket radio, plug the 20-pin harness into the vehicles wiring harness. • Connect the yellow wire to the 12-volt battery/memory wire. • Reconnect the negative battery terminal. • Connect the Black wire to the ground wire. • Cycle the key, by turning the ignition on for 30 seconds. Then off and on again to test the radio.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART TYTO-01 IMPoRTaNT WaRNING REV. 4/4/2014 INSTTYTO-01 This product includes instructions for installation which must be carefully followed. The instructions are worded in such a manner to assume that the installer is capable of completing these type of electronic installations.
PAGE 5
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA TYTO-01 TYTO-01 Interfase amplificada de Toyota 2001 y más recientes APLICACIOnES Lista de aplicaciones dentro COmPOnEnTES DE LA InTERfASE • Interfase TYTO-01 • Arnés de 16 pins con conectores pelados • Arnés de 14 pins a 20 pins con conectores pelados HERRAmIEnTAS REquERIDAS • Cortador • Pelacables • Cinta • Conectores (p. ej., conectores a tope, tapas acampanadas, etc.
PAGE 6
TYTO-01 Aplicaciones Lexus ES330 ES300 IS300 LS430 RX330 RX350 RX400H 2004-2006 2002-2003 2002-2005 2001-2006 2004-2006 2007-2009 2006-2008 ToyoTa 4-Runner (excluye Urban Runner) Conexiones que se deben hacer Del arnés de 16 pins al radio de mercado secundario: • Conecte el cable blanco con la salida positiva de la bocina izquierda del frente.
PAGE 7
TYTO-01 Conexiones que se deben hacer Instalación del TYTO-01 Los siguientes cables del arnés de 16 pins no se usarán, encinte los cables e ignórelos: • Cuando termine de hacer todas las conexiones en el radio de mercado secundario, conecte el arnés de 20 pins en el arnés de cables del vehículo. • Rojo, marrón, verde claro, azul/rosa, verde/púrpura, anaranjado/blanco. • Reconecte la terminal negativa de la batería. • Conecte el arnés de 16 pins al TYTO-01.
PAGE 8
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA TYTO-01 aDVeRTeNCIa IMPoRTaNTe REV. 4/4/2014 INSTTYTO-01 Este producto incluye instrucciones de instalación que deben seguirse cuidadosamente. Dichas instrucciones están redactadas dando por supuesto que el instalador es capaz de completar estos tipos de instalaciones electrónicas.