AWBGDL 150mm Wide Stone Grinder 700009 User Manual W 2007 Axminster Reference No:AWBGDL w w w. a x m i n s t e r. c o .
Index of Contents... Page No. Index of Contents......................................................................................................................02 Declaration of Conformity………….………........……..…………..........................................03 What’s in the Box………….………........……..…………............................................................ 04 General Instructions for 230v Machines..............................................................05-06 Initial Assembly......................
Declaration of Conformity... W AXMINSTER W H I T E Copied from CE Certificate The undersigned, authorised by Yancheng Baoding Electrical Tools Co., Ltd. No. 88 Yandu Road, Yandu New District 224005 Yancheng PEOPLE’S REPUBLIC OF CHINA declares that this product: MD3215B Bench Grinder manufactured by Yancheng Baoding Electrical Tools Co.
W What’s in the Box... AXMINSTER W H I T E 1 No. 150mm Grinding machine with grinding wheels fitted 2 No. Combined Eye Shield/ Spark guards complete with:2 No. M5 Phillips Heads Screws 2 No. 5mm Washers 2 No. 5mm Spring Washers 2 No. M5 Nuts 2 No. Tool Rests 04 complete with:- 2 No. M6 Plastic Star Knobs 2 No. M6 Coach Bolts 2 No. 6mm Washers 2 No. 6mm Anti-vibration Washers 1 No. Guarantee Card 1 No. Instruction Manual www.axminster.co.uk Model no.
General Instructions for 230v Machines... W AXMINSTER W H I T E Good Working Practices/Safety The following suggestions will enable you to observe good working practices, keep yourself and fellow workers safe and maintain your tools and equipment in good working order. ! KEEP TOOLS AND EQUIPMENT OUT OF THE REACH OF YOUNG CHILDREN WARNING!! Mains Powered Tools Primary Precautions These machine are supplied with a moulded 13 Amp. Plug and 3 core power cable.
W General Instructions for 230V Machines... AXMINSTER W H I T E Work Place/Environment Continued If the machine is not permanently fixed in place it is good practice to leave the machine unplugged until work is about to commence, also make sure to unplug the machine when it is not in use, or unattended. Always disconnect by pulling on the plug body and not the cable. Once you are ready to commence work, remove any tools used in the setting operations (if any) and place safely out of the way.
Initial Assembly... W AXMINSTER W H I T E Carefully unpack the machine and all the loose items from the box. Check the contents against the "What is in the box" list. If any items are missing please contact our technical services department using the telephone numbers that you will find in our catalogue. Having removed all the items from the box, please dispose of your unwanted packaging responsibly. A lot of the packaging is biodegradable.
W Setting Up the Grinder... AXMINSTER W H I T E Please read the section entitled Identification and Description of Parts, in order for you to understand the terminology that we will use, so that you may better understand the working and capability of your grinder. Keep this manual to hand for reference for any other personnel that may be required to use the grinder. Having assembled all the grinder attachments loosely, now the machine has to be set up correctly and all the attachments securely fastened.
Setting Up the Grinder... W AXMINSTER W H I T E Carry out a final check e.g. start the machine, check it runs smoothly. On each side, check that the spark guard is adjusted down to the stone, check the gap between the tool rest and the stone is correct, check the stone is not badly deformed (rounded edges, grooved face, etc; unless you have specifically shaped the stone to these profiles)check the eye shield is correctly positioned.
W Identification & Description of the Grinder... AXMINSTER W H I T E Grinding machine Essentially a double ended motor, with a mounting base, the motor flanges mount the wheel guards. The motor base contains the On/Off NVR switch. Wheel guards Two formed metal guards that enclose the grinding wheels. They are each formed in three parts. The inner part is mounted onto the motor flange, The stone cover is 'sprung' into the lip of the inner part and the outer part is located on it.
Grinder Illustration & Parts Description...
W AXMINSTER W H I T E Specific Safety Precautions for Grinding Machines... 1. DO NOT operate your machine until it is completely assembled and installed according to the instructions. 2. If you are not familiar with the operation of grinding machines obtain advice from your supervisor or instructor or another qualified person. 3. Only use grinding wheels or attachments rated higher than 3600 rpm with a 5/8"(16mm) arbor on this machine. 4. NEVER use a chipped or cracked wheel.
Changing a Grinding Wheel... W AXMINSTER W H I T E ! Ensure that the grinder is disconnected from the mains supply. Undo the nuts and bolts that secure the outer shell of the wheel guard to the inner shell. Remove the outer shell and place it and the nuts, bolts and washers carefully aside. (See fig 6) ! WARNING!! Be very careful that the stone cover does not 'spring' out of its location lip on the inner cover, it can spring out with some force.
W Changing a Grinding Wheel... AXMINSTER W H I T E Fig 10 Check that the spark guards and the tool rests are not touching the grindstone. Reconnect the grinder to the mains supply, give the grinder a 'short burst', by switching it on and off quickly. Check the grinder is not subject to any undue vibration,. If the grinder does vibrate, strip it down again and check that the bush (if fitted) is correctly positioned and is the correct size for the stone and the spindle.
Dressing a Stone... W AXMINSTER W H I T E ! If the grindstones wear unevenly, producing crests, dips or rounded edges, they should be dressed out using a suitable wheel dressing tool. (A selection of stone dressing tools are available in the Axminster catalogue.) Switch the grinder on and allow it to run for at least one minute.
AWBGDL 150mm Wide Stone Grinder 700009 Axminster Reference No:AWBGDL W AXMINSTER W H I T E Axminster Devon EX13 5PH UK FREEPHONE 0800 371822 2007 www.axminster.co.
