AXIS M2026-LE Mk II Network Camera User Manual
AXIS M2026-LE Mk II Network Camera Table of Contents System overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . How to install the camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . About the product's built-in help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . How to access the product . . . . . . . . . . . .
AXIS M2026-LE Mk II Network Camera System overview System overview 3
AXIS M2026-LE Mk II Network Camera Product overview Product overview 1 2 3 4 5 Control button SD card slot Network connector (PoE) Status LED indicator Part number (P/N) & Serial number (S/N) For technical specifications, see Specifications on page 13.
AXIS M2026-LE Mk II Network Camera How to install the camera How to install the camera About the product's built-in help You can access the built-in help through your product’s web page. The help provides more detailed information on the product’s features and their settings. How to access the product AXIS IP Utility and AXIS Camera Management are recommended methods for finding Axis products on the network and assigning them IP addresses in Windows®.
AXIS M2026-LE Mk II Network Camera How to install the camera About secure passwords Important When setting the initial password, the password is sent in clear text over the network. If there is a risk of network sniffing, first set up a secure and encrypted HTTPS connection before resetting the passwords. The device password is the primary protection for the data and services.
AXIS M2026-LE Mk II Network Camera How to install the camera The image shows how the field of view and aspect ratio can change between two different capture modes. How to select capture mode What capture mode to choose depends on the requirements of frame rate and resolution for the specific surveillance setup. For specifications about available capture modes, see the product’s datasheet. To find the latest version of the datasheet, go to axis.
AXIS M2026-LE Mk II Network Camera How to install the camera 1. Go to live view and select H.264/H.265. 2. Go to Settings > Stream. 3. Do one or more of the following: - Turn on the Zipstream functionality and select the desired level. Note The zipstream settings are used for both H.264 and H.265. - Turn on dynamic GOP and set a high GOP length value. - Increase the compression. - Turn on dynamic FPS.
AXIS M2026-LE Mk II Network Camera How to install the camera Note If you make changes to an active action rule, the action rule needs to be restarted for the changes to take effect.
AXIS M2026-LE Mk II Network Camera Troubleshooting Troubleshooting How to reset to factory default settings Important Reset to factory default should be used with caution. A reset to factory default resets all settings, including the IP address, to the factory default values. To reset the product to the factory default settings: 1. Disconnect power from the product. 2. Press and hold the control button while reconnecting power. See Product overview. 3.
AXIS M2026-LE Mk II Network Camera Troubleshooting 3. Go to Settings > System > Maintenance in the product’s webpage and follow the instructions. When the upgrade has finished, the product restarts automatically. AXIS Camera Management can be used for multiple upgrades. Find out more at axis.com/products/axis-camera-management Technical issues, clues and solutions If you can’t find what you’re looking for here, try the troubleshooting section at axis.
AXIS M2026-LE Mk II Network Camera Troubleshooting Problems with streaming Multicast H.264 only accessible by local clients Check if your router supports multicasting, or if the router settings between the client and the product need to be configured. The TTL (Time To Live) value may need to be increased. No multicast H.264 displayed in the client Check with your network administrator that the multicast addresses used by the Axis product are valid for your network.
AXIS M2026-LE Mk II Network Camera Specifications Specifications To find the latest version of the product’s datasheet, go to the product page on axis.com and locate Support & Documentation. LED Indicators Status LED Indication Unlit Connection and normal operation. Green Shows steady green for 10 seconds for normal operation after startup completed. Amber Steady during startup. Flashes during firmware upgrade or reset to factory default.
User Manual AXIS M2026-LE Mk II Network Camera © Axis Communications AB, 2017 Ver. M4.2 Date: September 2017 Part No.