Portable DVD Player LMD-6708Y Owner’s Manual PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.
Notice: This Product incorporates copyright protection technology that is protected by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Content A. Introduction ....................................................................... 1 B. Cautions and Warnings ................................................... 1 C. Contents ........................................................................... 3 D. Powering and Installation ................................................. 3 E. Controls, Indicators, and Connectors .............................. 4 F. Loading and Playing a Disc ............................................. 5 G. Setup.....
A. Introduction Thank you for choosing the portable DVD player.The main features include 7" Wide Screen (16:9 Aspect Ratio) Liquid Crystal Display (LCD) monitor and DVD player. Please read the entire instruction manual supplied with this product prior to using. The documentation will assist you in installing the system properly to obtain the best equipment performance. Please save this manual for later use. B. Cautions and Warnings 1.
environment,please dispose the battery properly. Do not use the unit in temperatures higher than 95 degrees Fahrenheit or 35 degrees Celsius. 4.Disassemble Do not attempt to disassemble the cabinet. There is a risk of electric shock and/or exposure to Laser Radiation. Contact qualified service personnel if your system needs repair. 5. Cleaning Unit When cleaning, make sure the system is unplugged from the power source. Do not use liquid cleaners or aerosol cleaners.
C. Contents 1. 2. 3. 4. 5. 6. 1x 1x 1x 1x 1x 1x DVD Player Remote Control with battery AC to DC Adapter Cigarette Lighter Adapter Instruction Manual AV Cable D. Powering and Installation 1. Powering the system indoors Plug one end of the AC to DC adapter into the DC Input jack on the right side of the DVD player, then plug the other end into the 100~240V AC power receptacle. 2.
E. Controls, Indicators, and Connectors 4 PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.
2. Remote Control View F. Loading and Playing a Disc a. After connecting power to the unit, power on “DVD player” with the power switch and the Power LED will light. b. Open the disc tray by OPEN Switch, and place a disc into the tray with the label side facing up. c. Close the tray and the unit will load the disc and start playing. d. Rotate BRIGHTNESS and VOLUME to adjust the LCD’s brightness and DVD player’s volume. e. To stop playing a disc, press STOP.
G. SETUP Press SETUP to display the Main screen of the SETUP Menu on the screen. Press SETUP again to exit the SETUP Menu and the unit will resume its last playback mode. 1) Press SETUP, the General Setup Page will display on screen. a).Select TV Display using the UP/DOWN button, and then press RIGHT to enter the submenu. Select the TV display mode on the screen using UP/DOWN, and press ENTER to confirm the setting. Press LEFT to return.
e). Last Memory *On: The unit will return to the last position on the disc. *Off: The unit will not return to the last position on the disc. Note:The Last position memory function only effect when OPEN operation and AV In/Out switching. 2) Select Video Quality Setup by using the LEFT/RIGHT button, press ENTER to enter the video quality setup page. This page contains: 1)Brightness 3)Hue 2)Contrast 4)Saturation 3).
c) Select Parental using the Up/Down button, then press RIGHT to enter the submenu. Select the parental level you desire using the UP/DOWN button for discs with lock-out function or multiple rating levels. These are listed from the lowest level (1 KID SAFE) to the highest level (8 ADULT). Press ENTER and input 4 digit password, then press ENTER again to confirm the parental level setting. NOTE: The level of 8 ADULT is the factory default.
H.
I. Menu A DVD is divided into sections called titles and chapters. When you play a DVD, a root menu of the disc will appear on the screen of your TV or Monitor. The contents of the menu vary from disc to disc. Press MENU during playback to display the menu. Some DVDs only allow you to select disc playback options using the DVD root menu. J. Display 1. PLAYING TIME AND REMAINING TIME a.
2. ANGLE During playback of a disc, press ANGLE to display the available angles for discs containing multi-angles*, with the current angle number (1) and the total number of angles (2) displaying. Press ‘ANGLE’ to select another angle, then press again to exit and return to the normal viewing angle. *NOTE: Not all discs contain this feature. Angle Screen Display 3.
4. AUDIO During playback press AUDIO to select the audio language you desire*, with the current Audio Channel Number (1) and the total number of Audio Channels (2) displayed. Press AUDIO again to select another audio language. The audio display will disappear automatically if the AUDIO button is not pressed again within 3 seconds. Audio Language Screen Display * Some DVDs only allow access to this function through the DVD menu. 5.
6. A-B REPEAT a. During playback press A-B Repeat first to set the Starting Point A. A-B Repeat Starting Point Screen Display b. Press A-B Repeat second to set the Ending Point B and the player will repeatedly play the part between Point A and Point B. A-B Repeat Ending Point Screen Display c.Press A-B Repeat third to cancel A-B repeat and resume normal playback. A-B Repeat Cancelled Screen Display 13 PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.
7. REPEAT a. During playback press REPEAT constantly to see the repeat mode. Chapter: Repeat the current chapter Title: Repeat the current title All: Repeat all chapters and titles Repeat Off: Resume normal playback The Chapter repeat display shows below for example: Chapter Repeat Screen Display K. Variable Playing Mode 1. Playing Audio CDs When playing an audio CD press the DISPLAY button constantly on the remote to view time information.
Total Elapsed: The current track playing and the total time that the CD has been playing. Total Remain: The current track playing and the amount of time remaining on the CD. Display Off: The CD time Information will not be displayed. Take ‘Single Elapsed’ display as an example: Single Elapsed Screen Display USING THE REPEAT FEATURE The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options: One- repeats the track that is playing.
2. Playing MP3 Discs MP3 is a format for storing digital audio. An audio CD-quality song is compressed into the MP3 format with very little loss of audio quality while taking up much less disc space. CD-R /RW discs that have been encoded in MP3 format are compatible with this system. MP3 MENU Screen Display When an MP3 disc is inserted into the unit, the menu screen appears automatically.
4. Use the button to move to the next song. Press the button to move to the beginning of the previous song. USING THE REPEAT FEATURE The default mode for the Repeat feature is Repeat Off. Pressing REPEAT consecutively changes the repeat options: • Repeat One (repeat playback of a song) • Repeat Folder (repeat playback of a specific folder) • Folder As you toggle through the options, the repeat mode changes. The selected repeat mode loops repeatedly until you turn it off.
3. Playing JPG file 1) Load the JPG Disc into tray. 2) Select JPG file by pressing “UP/DOWN” or ENTER button through menus or submenus. To go back previous menu page, use LEFT button. 3) You can preview the JPG file which you selected by pressing “PLAY” or “ENTER”. 4) Pressing the “LEFT“ Key will rotate the picture 90 degrees counterclockwise. Pressing the “RIGHT“ Key will rotate the picture clockwise.
L. Connecting to a other equipment 1. AV Out Connecting with a TV or another Monitor Put the AV In/Out switch to Out, Connect one end of the A/V cable’s black plug into the unit’s DVD A/V jack, and connect the other end to the AUDIO INPUT jacks on your TV or Monitor (white = left channel, red = right channel, yello=video). 2.
3. Headphone Optional wired headphone may be used with the unit. Simply plug in the headset to the earphone jack. 4.TV Tuner and Game Pad( neither included) a. Position the AV In/Out Switch to “In” Position. b. Connect the TV Tuner or Game Pad to the TV Port to receive TV programe and enjoy a lot of games. M. Specifications Compatible DISC: DVD/CD/MP3 Signal system: NTSC Audio S/N: Better than 60 dB Dynamic range : Better than 85 dB Power source: DC 9V Operating temperature: 5~35°C Weight : 0.
N. Troubleshooting PROBLEM No sound or distorted sound SOLUTION • Make sure your DVD is connected properly. Make sure all cables are securely inserted into the appropriate jacks. Can’t advance through a movie • You can’t advance through the opening credits and warning information that appears at the beginning of movies because the disc is programmed to prohibit that action. The icon ( ) appears on screen The feature or action cannot be completed at this time because: 1.
Troubleshooting (Cont) PROBLEM IR sensor inoperative Disc won’t play Play starts, but then stops immediately SOLUTION • Verify that the batteries in the remote are fresh. • Verify that the remote sensor eye is not obstructed. • Verify that the infrared transmitter is affixed over the sensor eye of the component to be controlled. • Insert a disc with the label side facing up. • Check the type of disc you put into disc tray. This DVD only plays digital video discs, audio CDs and MP3s.
