User's Manual

Web Manager User Interface

The Web Manager User Interface is a web-based tool that you can use to set up

the Modem if you don’t want to use the default setting of Install CD. You can also

use it to manage advanced functions of the Modem. From the User Interface, you

can perform the following tasks:

• View the Modem’s current settings and status

• Configure the Modem's router function to connect to your Service

Provider with the settings that they provided you

• Change the current network settings such as the Internal IP address, the

IP address pool, DHCP settings, and more

• Set the Modem’s firewall to work with specific applications (port

forwarding)

• Set up security features such as client restrictions, MAC address filtering,

WEP, and WPA

• Enable the DMZ feature for a single computer on your network

• Change the Modem’s internal password

• Reboot the Modem

• Back up your configuration settings

• Reset the Modem’s default settings

• Update the Modem’s firmware

Before you use the Advanced User Interface, you will need to have a User Name

and Password of the Modem. Please contact your Service Provider to obtain

them.

Step 1 │ Access Network Setup

1.1. Connect the PC to your Modem using the CAT-5 Ethernet cable. Use ANY

one of the Ethernet ports on your Modem.

1.2 If you have installed AxessManager, start AxessManager utility if it is not

already active. From Main window, select Menu button. Refer to

AxessManager Operational Guide for instructions if needed. If you have not

installed AxessManager, refer to section “Configuring Ethernet Access” to