AXW-T800 / 800R AXW-T1900 / 1900R
Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R I NTRODUCTION Axesstel's CDMA2000 1x fixed wireless terminals allow users to "get connected" to voice and data services with unprecedented ease. Powered by QUALCOMM's MSM5105 processor, these terminals provide data service through USB and RS-232 interfaces at rates of up to 153 Kbps. With RJ-11 phone connections, the users can enjoy rich features ranging from basic voice service to caller ID, call waiting, 3 way calling, and analog fax.
Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R T ABLES OF CONTENTS Optional Features Safety Precautions ----------------- 3 Call Waiting ---------------------------26 Checking Parts ---------------------- 4 Terminal Information --------------- 5 Three-Way Calling ------------------26 Getting to know the terminal----- 8 Caller ID -------------------------------26 Call Forwarding ----------------------26 Voice Mail Service ------------------ 26 Basic Operation Power On/Off ----------------------
Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R S AFETY PRECAUTIONS 1. Avoid placing the phone in a dusty location, or near a source of gas or fire. 2. Don not shake, hit or drop the phone. 3. To clean the outside of the phone, use only a soft, dry cloth. The chemicals in alcohol, benzine or acetone can damage the surface of the phone. 4. Do not twist or pull the cables. 5. Do not disassemble the terminal. 6. DO NOT use the power adapter if: - The power cord is damaged.
Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R C HECKING THE PARTS After opening the package, check to make sure that you have all the parts shown below. If any piece is missing or broken, please call your agent or customer service. Items marked optional may be available only on select models.
Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R T ERMINAL INFORMATION How to install internal battery (optional) 1. Open battery cover on the bottom side of the terminal. 2. Connect the DC power cable to terminal. 3. Insert the battery pack in the right position between the hold bars. 4. Close the battery cover. 1 4 2 3 Installing the RUIM Card (Optional for AXW-T450R/T800R/T1900R models only) 1. Put the RUIM card into the Socket as shown in the picture.
Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R Desktop Installation This FWT ACW-T800/T1900 operates by receiving electricity from an electrical outlet or internal battery. 1. Connect the antenna on the back TNC connector of the terminal. 2. Connect a wire telephone to the terminal using an RJ-11 cord. NOTE: Use the telephone compatible to FCC part 68 only. Non-compliant phones may not work properly. 3. Plug the AC Adaptor jack into the DC 15V jack of the Terminal. 4.
Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R Wall Mount Installation 1. Mark two mounting hole locations to match the screw hole in the back of the terminal. 2. Drill two holes at the marked locations. 3. Tighten the screws until the head is about 5mm from the wall. 5. Plug in the power connector and route the cord in the groove, if needed. 6. Screw the antenna into antenna connector. 7. Hang the terminal on the screw using the two holes in the back. 8.
Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R G ETTING TO KNOW THE TERMINAL LED indications LED Color Power Red Power is being supplied by AC adapter Off No power / Power is being supplied by battery. Signal Green Excellant Service Condition Orange Good Service Condition Red Off Green Orange Voice Mail Voice through the line is not clear but a call is available. No Service Condition Blinking Battery Meaning Incoming call If there is external power, chrged complete.
Basic Operation Power On / Off Making Calls Receiving Calls
Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R P OWER ON / OFF There is power switch on the bottom side of the terminal. 1. Turn on the terminal by moving switch to ON position. 2. Press the power switch more than 2 seconds to turn off the FWT. NOTE: When you turn on the terminal, it automatically searches for service signal. When it successfully acquires service signal, it generates dial tone on the handset.
Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R M AKING CALLS 1. Check to see that your terminal is turned on. 2. Pick up the handset of the phone. 3. If you hear the dial tone, dial the desired telephone number, using the numeric keypad. 4. Wait for about 4 seconds until the call is automatically made by the terminal. Note: Press or button to make all right away after entering the dial number. 5. When the other person answers, begin conversation.
Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R R ECEIVING CALLS The terminal signals the telephone(s) to ring when an incoming call is detected. 1. Pick up the telephone handset to answer the call. 2. To disconnect after finished, replace the handset on the phone.. Note 1: Make sure that the attached telephone ringer is enabled. Note 2: When an incoming call comes in, when you are holding the receiver, press any key on the numeric keypad of the phone to answer the call.
Advanced Feature Adjusting voice volume Setting alarm Setting 1 minute alert Setting connection alert Setting caller ID mode Setting autosend time Setting DTMF length Chang the lock code Restricting outgoing calls Restricting long distance calls Restricting international calls Terminal reset
Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R A DJUSTING VOICE VOLUME You can control the volume level of the terminal. 1. Pick up the handset. 2. Press . 3. Press to raise or to lower volume. Note: Some telephones may have their own volume control. Use both the terminal and the telephone volume controls to optimize the sound level. S ETTING ALARM Alarm feature can be set to ring at a set time. The phone connected to the terminal will ring. To set up alarm time. 1. Pick up the handset. 2.
Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R A DJUSTING VOICE VOLUME You can control the volume level of the terminal. 1. Pick up the handset. 2. Press . 3. Press to raise or to lower volume. Note: Some telephones may have their own volume control. Use both the terminal and the telephone volume controls to optimize the sound level. S ETTING ALARM Alarm feature can be set to ring at a set time. The phone connected to the terminal will ring. To set up alarm time. 1. Pick up the handset. 2.
Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R S ETTING CALLER ID MODE If your phone connected to the terminal is caller ID enabled, you can set the terminal to display the caller identification number or name on the telephoneÕs LCD display. 1. Pick up the handset. 2. Press for disable the Caller ID feature. 3. Press for DTMF Standard Type. 4. Press for FSK (Bellcore) type. NOTE: The default setting of Caller ID is DTMF type.
Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R C HANG THE LOCK CODE The lock code prevents the terminal from being used by unauthorized person without your permission. The default lock code is Ò Ó. To change the lock code: 1. Pick up the handset. 2. Press . 3. Enter old 4 digit lock code followed by . For example . Beep sounds as confirmation. If not correct, error tone will sound and the terminal returns to standby mode. 4. Enter new 4 digit lock code followed by . For example .
Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R R ESTRICTING LONG DISTANCE CALLS This feature can be used block long distance calls from being made, but still wish to receive incoming calls and make local calls. 1. Pick up the handset. 2. Press . 3. Enter 4 digit lock code. If not correct, error tone will sound and the terminal returns to standby mode. 4. Press to enable or to disable. Note 1: Default lock code is " ". To change, see page 16.
Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R T ERMINAL RESET Resets the terminal back to the factory default state. 1. Pick up the handset. 2. Press . 3. Enter 4 digit lock code. If not correct, error tone will sound and the terminal returns to standby mode. 4. Press to reset. Note 1: Default lock code is " ". To change, see page 16. Note 2: This feature is automatically set after 3 seconds with a confirmation tone.
Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R Receive setting To receive an incoming Fax or Data call, the terminal must be configured correctly. 1. Pick up the handset 2. Press to set Voice and Analog Fax. 3. Press to set Received Data once. 4. Press to set Receive PC Fax once. 5. Press to set to Receive PC Fax always.
Analog FAX Service Fax Set-Up Sending Fax Message Receiving Fax Messages
Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R F AX SET-UP * The optional Fax module is required to send or receive fax with analog Fax machine. Connect an analog Fax machine to the terminal with regular RJ-11 phone cord. S ENDING FAX MESSAGE You can send and receive fax messages using a fax machine connected to the terminal. Manual dialing method 1. Load documents to the fax machine. 2. Pick up the handset or press On-Hook button of the fax machine. 3. Press and wait for dial tone. 4.
Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R NOTE1: If you set the terminal to receive Fax always, the terminal will transfer every call to the fax machine connected. If you set the terminal to receive fax once mode, the terminal will transfer the first incoming call to the fax machine and set back to voice call mode automatically. To set the terminal to voice mode. 1. Pick up the handset or press On-Hook key. 2. Press 3. Wait for a confirmation dial tone.
Optional Features Call Waiting Three-Way Calling Caller ID Voice Mail Service
Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R C ALL WAITING Call Waiting is a feature, which enables you to be alerted to a second incoming call while you are on the first call of your telephone. Contact your service provider to activate or deactivate Call Waiting. 1. You will hear a beep from the earpiece when a second call is incoming. 2. Press the hook shortly to answer to the second call. 3. Press the hook again to get back to the first call.
Miscellaneous Menu Options Table Troubleshooting Specifications
Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R M ENU OPTIONS TABLE MENU EXAMPLE Enter the menu item by pressing ** and the menu option. 1. Sound 1. Voice Volume Control (louder) (lower) Lower a confirmatiom beep will sound 3 seconds (11:36 AM) (2:10PM) Alarm(ringer) rings once each day for 1 min 2. Setting Alarm , time(24hr), 3. Setting 1 Minute Alert Off / On (off) (on) Alerts each minute during conversation 4.
Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R T ROUBLESHOOTING Troubleshoot the conventional wired telephone In the event you are unable to place or receive telephone calls, first be sure that the connection wire is properly connected to the RJ-11 phone port on the terminal and to the RJ-11 port of the telephone. If unsure whether or not the telephone is operational, connect a telephone, which is known to be operational to the terminal.
Safety Information 1 . SAFETY INFORMATION FOR FIXED WIRELESS TERMINALS .POTE NTIALLY EXPLOSIVE ATMOSPHERES Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cauls e an explosion or fire resulting in bodily injury or even death. . INTERFERENCE TO MEDICAL DIVICES Certain electronic equipment may be shielded against RF signal from you wireless phone.
SAR INFORMATION THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless Terminal is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
SAFETY INFORMATION FOR RF EXPOSURE Body worn operation This device was tested for typical body-worn operations with the back of the phone kept 25 mm. from the body. To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories that maintain a 25 mm. separation distance between the user’s body and the back of the phone, including the antenna. The use of belt-clips, holsters and similar accessories should not contain metallic components in its assembly.
U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a digital device pursuant to Part 15 of the FCC Rules.