[ commission ans Se [| [F—— The WLL (Wireless Local Loop) phone operates through a wireless connection instead of a pane wire, linking the subscribers of the general wire phone and the phone office. AX W-PBOD & AX W-P1500, a CDMA2000 Fixed Wireless Phone has an elegant design with advanced features. A large -ine dot matrix liquid crystal display provides user-friendly interface for quick and easy information display.
EC Cots 2a at vat 5 som ZK BALES OF CONTENTS Safety Precautions .. Checking Parts Setting up Your Phone Getting to Know Your Thor Display cons. Function Keys. Basic Operation Paling Calls .. Adjusting Volumes Choosing the Ring Tong On-Hook Call internal Phone Book The Internal Hons Book Storing Numbers in Merry. Searching for Numbers in Memory. Erasing 2 Number in Memory. One-Touch Calling Two-Touch Calling. Useful Features Call Logs... Electronic Dialing.
Cot 0 Hots toa ap xs isomerism IK Bi PRECAUTIONS 1. Avoid placing the euphoria in a dusty location, or near a source of gas of fire. 2. Don't shake, hit or drop the phones. 3 1 you clean the outside of the pane, use only a soft, dry cloth. The chemicals In alcohol, benzine or acetone can damage the surface of the phone. Do not twist or pull the cord out of the phone, Do not disassemble the phone. BO NOT use the power adapter if: « The power cord is damaged.
mls ion COA 3000 Wt aol Loop WBS Piss HECKLING THE PARTS Nee you have unpacked your phone, make sure that you have all the parts shown below. If any piece is missing or broken, please call your customer service 1. Milan Unit 2. Handset 3. ACIDIC Adapter 4. User's Manual 5. Antenna 6. Battery 7.
TC IN Heine UP YOUR PHONE Installing the phone This phone operates by receiving DC power from the TASTELESS power adapter, which is connected to electrical outlet. The phone is equipped with a rechargeable Battery to back up AC power failure.
Neo en Cortes 2008 ess Eat Loop AX OPUS “I Ere UP YOUR PHONE Wall mount installation 1. Mark two mounting hole locations on the wail. 2. Drill two holes at the marked location. 3. Attach the wall mountable bracket, 4. Tighten the screws firmly. 8. Plug in power connector and routs the cords in a groove, 6. install the phone onto the wall mount bracket hook. Push the phone against the wall and pull i down to lock. 7. Screw the antenna info antenna connector. 8.
Ne os uit og iw rein SETTING UP YOUR PHONE Service Status Check Display in service area When the power cord is connected proper, all segments in the LCO window wilt turn on briefly and Power LED will light. § All The number of bars of signal strength indicator {antenna icon} TASTELESS indicates the strength of service signal of the area. y The display will show the greeting (TASTELESS as default, THU 10/09 5:24P time and date. You can change the resting. (See page 34.
iow DIA 2000 Wireless Laval Loop AXOVPRUGRFISUOR N SETTING UP YOUR PHONE installing the battery 1. Remove screws with a screw driver and remove the battery cover on the bosom of the phone. 2. Plug in battery connector. 3. Replace the battery cover and screws.
Ne Cora on colostomy am Sen “1 ne TO KNOW YOUR PHONE 1 Antenna: Adjusting the antenna improves the sound quality of the call 2 MENU: Press to access the phone's menus, 3 CLEAR: Lots you clear your last entry, 4 STORE: Stores phone numbers, and any settings you select in the menu within the phone's memory § MESSAGE: Press to relieve messages. 8 RECALL: Allows you to redial the fast number called. VOL/SC R: Lets you adjust sound levels and scroll through the menu options and displays.
COMA 2008 Wives Lead Lap AX H-PRODKIT1900F [BY suave ICONS Loons display on the screen to Indicate what features you are using, signal strength and battery status etc... Tul ese TASTELESS THU 10/09 2:32P Indicates the strength of the current signal. The more bars, the stronger the signal, E indicates the level of battery power. The mote bars, Ihe more power. When the battery is ow, the icon blinks and an alert tone sounds. Indicates that you are using the phone's menu.
Sle CAA 2006 Hires Local Loop ANKPSORRIPISOGH i< [Criterion KEYS win some sagas © Ed secs IW — Press this key to display the phone's main menu. Press this key to store a phone number in the phone book to save menu settings. Press this key to retrieve messages. Clears information from the display screen. «Ta erase one character from the display screen, press # once, To erase afl the characters on the screen, press and hold down. To go back one step in menu mode, briefly press it once.
Basic Operation “4, Placing Calls Redial Receiving Cali Adjuring Volumes Choosing the Ring Tone On-Hook Cal
Bt 1000 Wins oct Loo RO droopiness IN [Heme CALLS 1 Make sure your phone fs turned on. 2 Pick up the handset to hear a dial tone. When the pins falls to acquire service signal, you wil hear PLEASE "No Service tone (inferential tone). DIAL Dial the number to call. The LED window displays the number, “Toll r 4 Walt for a moment of press «Si . 5 When the other person answers, begin your conversation, | CALLING... # To end the call, replace the handset.
Elanor FREE CALL This feature allows you to make a call without picking up the handset. 1 Press (8). 2 Enter the phone number you want ta call 3 When tout hear the other party answer, begin the conversation. For privacy conversation, just pick up the handset and continue conversation. METE: Unintended OFF-HOOK recognition.
COMA 2600 Wise Local Loop ANI: PYIOIIPIINID 2K Crustiness VOLUMES you can control the sound volumes including the key tone, earpiece, speaker and the ringer & Controlling key tone volume aif Press WATS. repeatedly until it reaches proper volume. KEY VOLUME & Controlling external speaker volume All 3 Press ai repeatedly during hand free call 1a adjust SPEAKER VOLUME external speaker volume. Ep.
Phone book “5 The Internal Phone Book ’ Storing Numbers in Memory Searching for Numbers in Memory Erasing a Number in Memory One-Touch Calling Two-Touch Calling
is Ne wife Corn 000 at out Loop x misprision Zi i INTERNAL PHONE BOOK Your phone has an internal "Phone Book™ in which you can store up to 99 frequently calling names and numbers. Brie NUMBERS IN MEMORY 1 Enter «in. @, B®) Ting Wm 2 Enter name by pressing the alphanumeric keypad NAME ? and press ego NOTES tidbit do not want to enter name, just press. Sine Pod here. The number will be save as “No Name”. Bail 0 TONER: Name sentry is limited to maximum 16 letters.
is ] COM 000 Wii Locate Loop A XI-PIOOBPIS0OR whl has already been stared, "OVERWRITE?" will display. Press wii to overwrite or press back to automatic location, KEEP SECRET ? 8 "KEEP SECRET? displays. Press «iis if no NO secret feature is necessary. To store the number in secret, select “YES” by pressing «Es or (B) and press «die.
[ anh mn CDA 2000 Irons Load Soap AX H-PRUUSPIICOE “1 & Searching by Phone Number 1 Press wa (8) (Phone book), (3) (Search), (number) Tol a PHONE NUMBER? 2 Enter all or part of the number you remember and press «ii. 3 The phone displays the memory location numbers and names which has the number marches your entry. NOTES NO NUMBER MATCHES’ appears when there's no number matches your entry. 4 Press «Hm or (5), (B) to search for the name you're poking for and press «diam to display the number.
COAL 200 Ws cn Lop AXES NUMBER IN MEMORY 4&9 To Erase a Specific Number Tol w 1 Press Sims (2) (Phone book), (Memory) 2 Press one of search options, (1) (Name) or (2) (Number) or (B memory) Tal 3 » 01: DAVID KIM 3 Enter name, address or phone number according to 05 : DANIEL search option 4 Select item to by ING ew OF (6), (3) TE let item 10 erase by Pressing wim Of (a), and press wim DAVID KIM TENTERHOOK LOCK CODE' appears when you fry to 123-456-7890 poetess secretly saved number.
6 Ona 208 tes Sc og AX FOES 4 Select YES by pressing «ta or (50), GD . Val ERASED 5 Press was to confirm [8] round CALLING Memory locations 01 ~ 09 are special one-touch dialing locations. You can dial the numbers stored in 01-02 by pressing just one key. 1 Pick up the handset or press Tall 2 Press and hold the number of the location (1-8) Memory 1 ‘containing the number to be called. DAVID KIM 3 The name and number displays and dials Vol am ¢ automatically. CALLING...
iE + Useful Features “Hl, call Logs Display Your Phone Number Mute Silent Scratchpad Sending Your Phone Number Selecting Time Mode Setting the Alarm Checking and Clearing Cali Times Setting Warning Beeps
[ 3 COE 2000 Woes avs Lp 1 pst RES ALL HISTORY Your phone stores the last 10 outgoing calls and the last 10 incoming calls {only when Caller ID function is activated). You can display and redial these numbers. 4&3 Redialing Outgoing Calls 1 Press «Zan, (D{Call History), (3) (Outgoing). NOTE: Hf here's rio out going call History, "OUTGOING CALL MEMORY EMPTY displays. OUTGOING 2 Press «im or (1) to select number to redial. 05: INCOMING 3 Press «gis to radial the number.
CODA 200 Int cu Lop AX RABBET wim & Erasing All Numbers in Call History 1 Press «iit (8) (Security) Vol np lack cod ENTER LOCK CODE Lack code is set as from the factory. You can change lock code {see page 77) 3 Press (8) (Erase Logs) Soul eng ERASE CALL LOGS 4 Select VES by pressing «
a. hd resignation CMS 2000 Wiriness Local Lion AXW.PROIRFI008 IN is working. The other party can no flange hear you, but you can hear them. 2 Press «it ion 0 resume the conversation. S KEYPAD You can check your own phone number or save a number during a conversation without transmitting the dial tones to the other party. This function is available only during a telephone conversation. 1 Press «miss Key) during conversation. ‘SILENT KEY" blinks fo indicate the function is waking.
[ obis nse Se Nectarine TIME MODE 1 Press
Me cw 28 tos oo i so HECKLING AND CLEARING CALL TIMES £9 checking the Last Call Time 1 Press wii , (3) (Time), (@ {Last Call). Val 2 Press wie 10 clear the display. LAST CALL TIME 3:25 & checking Accumulated Air Time of Incoming Calls Foul ii} EET 1 Press «fe , (3) (Time). (2) (Air Time), INCOMING CALLS (® (incoming). y 2 Press «iif to clear the display. 3:28 4&9 checking Accumulated Afr Time of Outgoing Calls ll 1 Press «ie , (3) (Time), Time}, OUTGOING CALLS (Outgoing).
MICA JOG Wireless Las! Loop SYINPEFIBPII00R ee 1 300 eos ct 201 wy ZK Ben WARNING ALERT You can set your phone to sound warning beeps that indicate: each minute you are on a phone call ~ when you are out of the service area £9 setting/Releasing 1 Minute Alert eS 1 Press wis, Min Alert). 2 Detect ON or OFF by pressing <2. or 1 MINUTE fil 3 Press wie. 2 minute alerts set, the phone gives Sundress sate minute while you are on a phone call.
Advanced Features Changing Greeting Message System Reset Restricting Use of the Phone Locking the Phone Changing the Lock Code Tone Length and Back Light
Cora mts veg 0 tGRI908 fom IN HANGING GREETING MESSAGE This feature lets you change the greeting message that the phone displays while it's standby. 1 Press wie (8) (Security). 2 Enter lock code. 1. GREETING Look code is set as from the factory. 2, CHANGE CODE To change lock code (see page 77) a Press cresting). Current greeting displays. Stl 4 Press «iim 10 change greeting. DO NOT TOUCH_ Enter your new resting message by pressing the alphanumeric keys.
SN coat tos cs op BEDS Restrained USE OF THE PHONE You can restrict the use of the phone by unauthorized persons. &p Restricting Outgoing Calls Vol 8 (EB 1 Press aide. (8) (Security). 1. OUTGOING rv 2. INTERNATIONAL NOTEELGtkibode is set as from the factory. To change lock code (ses page 7%) Ill 3 Press (8) Restrict), OUTGOING CALL 4 Select "ON" by pressing «mm or (09, Press lo save change.
N2 Canto 60 os vat tp Aaron mon IN COKING / UNLOCKING THE PHONE You can lock your phone so that calls cannot be made by unauthorized persons. You can still receive incoming calls. Turning the phone off does not erase this feature; the phone stays in mode until you reset it, 1 Press «im (8) (Security) 2 Enter lock code Tal 3 Crass (8) (Auto Lock) LOCKED & Select "ON" or "OFF" by pressing <2 (2. FRI 10A1 2:44P © Press «5m 1o save the change. NOTE: When locked, the phone display ?LOCKED-.
[ 34 cont ot ts cs eons aces IN ONE LENGTH AND BACK LIGHT Tone Length Some ARS you call may be able to recognize only dong tones. You may have to change the tone length to LONG. 1 Press wii (8) {Auto Setup), (8) {tone Length) 570 2.Select "NORMAL" or "LONG" by pressing 2 or. Bye TONE LENGTH 3 Press «25 » NORMAL 65% Amie 10 Save the change. 4& Back Light You can control the length of back lighting of the display and the keypad. 1. Press wim, (5) (Auto Setup), (2) (Back light) 2.
[] Nd J COMA 2000 Wises Local Loop AN H-PYSURFISIR all Forwarding Call Forwarding is a feature that lets you forward your incoming calls to another phone number, even if your phone Is turned aff service area. Contact your service provider to activate Call Forwarding. all Waiting Call Waiting alerts you to a second incoming call while you are on the phone. When there's anther incoming call, you will hear warning beep. To respond to the call waiting, press «Em or hit shortly the hook switch once.
[ I [Message Service Message Service is network dependent feature and is available only when your service provider supports it. Check your service provider is providing message service before using this function. = & Sending New Text Messages 1. NEW 1 Press JE. , (3) (Send MSG), (1) (New). 2. SAVED MSG 2 Enter destination number and press wd 3 Write message using the alphanumeric keypad and press aii Note: Ses page 19 10 see how to edit text. 4 Your phone number is displayed as call back number.
Retrieving Text Message 1 When text message arrives, TEXT MESSAGE ARRIVED displays shortly and [53] appears in he icon line, 2 Press JE. Message). 3 Press «ims 0r(), (B10 select message you want 10 se8 and Press wim 4 The message, arrival time and call back number (if available) show up. If the message is long, it will be strolled down in 3 seconds automatically. To scroll up and down manually, press wim or (5,8) . 4 1f the message contains call back number, press «im if you want to call back.
smc IMNSHO Se & Erasing All Message 1 Press Zi (3) (Erase MSG) (2). 2 Select YES with «ite P0858 wm & Setting/Releasing Message Lock 1 Press 455. Option), (E{MSG Lock). 2 Select ON or OFF with «188mor (59), (#2) 3 Press «2m. ‘While message lock is set, the phone will ask Lock Code whenever you try 16 retrieve messages. & Setting/Releasing Message Alert 1 Press 22, | (MSG Option) (3) (MSG Alert).
UE comes im sets a vss VIN MENU OPTION TABLE | i Ht Explanation ; 1: OUTGUNNING Stores len phone numbers called CALL nest recently HISTORY [oe Sores ten phone bribers of calls received most recently SEARCH OPTION Used when seafaring or a phone umber none | SEARCH NAME / NUMBER ( MEMORY | in the phone book by name umber : stored memory number BOOK ‘User when storing a phone number and 7: STORE name ir the phone back 1 ERSE SEARCH OPTION Used Wren erasing & pone Tuber in NAME} NUMBER / MEMORY | the phone boa
ERASE HISTORY? Frames res in gaining oF Cotangent & ERASE LOGE NOES call history. $: LANGUAGE BE antennae Selects user interface language TATTOO PORT DATA PORT ‘Sao data port configuration SERIAL spate |2 DS SPEED DS SPEED “Sines Gaea service speed SERVICE 3 RECEIVE MODE | RECEIVE MODE Sales coring call abrasive mode VOICE ASYNCHRONOUS FAX “The lock code js preset to 5000 at the factory. * AL MENU, press "CLEAR" 10 Saturn 10 the previous mer.
Safety Information 1. SAFETY INFORMATION FOR FIXED WIRELESS TERMINALS POET INITIALLY EXPLOSIVE ATMOSPHERES Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could caulks e an explosion or fire resulting in bodily injury or even death. INTERFERENCE TO MEDICAL DEVICES Certain electronic equipment may be shielded against RF signal from you wireless phone.
SAR INFORMATION THIS MODEL PHONE MEETS THE GOVERNMENT 'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF)energy set by the Federal Communications Commission of the U.8.Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
FCC Compliance Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: {1} This device may not cause harmful interference, and {2) This device must accept any interference received. Including interference that may cause undesired operation. Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
FCC RF EXPOSURE INFORMATION In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards.
US.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits fora Class B digital device pursuant to Part 15 of the FCC Rules.