CDMA 2000 Wireless Local Loop AXW-P800/P1900 E RASING A NUMBER IN MEMORY 1 ABC 2 GHI 4 DEF 3 JKL 5 PQRS 7 MENU MNO CLEAR 6 TUV 8 WXYZ STORE 9 OPER MESSAGE 0 POWER # RECALL To Erase a Specific Number 1 Press RECALL (Phone book), 3 (Erase), 3 (Memory) 2 NAME? 2 Press one of search options, 1 (Name) or 2 (Number) or 3 (memory) 3 Enter name, address or phone number according to search option. 4 Select item to erase by pressing or , STORE and press .
CDMA 2000 Wireless Local Loop AXW-P800/P1900 4 Select YES by pressing 5 Press STORE or , . - ERASED - to confirm. O NE-TOUCH CALLING Memory locations 01 ~ 09 are special one-touch dialing locations. You can dial the numbers stored in 01~09 by pressing just one key. 1 Pick up the handset or press . 2 Press and hold the number of the location (1~9) containing the number to be called. 3 The name and number displays and dials automatically. Memory 1 DAVID KIM CALLING...
Useful Features Call Logs Display Your Phone Number Mute Silent Scratchpad Sending Your Phone Number Selecting Time Mode Setting the Alarm Checking and Clearing Call Times Setting Warning Beeps
CDMA 2000 Wireless Local Loop AXW-P800/P1900 C ALL HISTORY Your phone stores the last 10 outgoing calls and the last 10 incoming calls (only when Caller ID function is activated). You can display and redial these numbers. Redialing Outgoing Calls MENU 1 Press , 1 (Call History), 1 (Outgoing). NOTE: If there's no out going call history, 1 ABC 2 GHI 4 DEF 3 JKL 5 PQRS 7 MENU MNO CLEAR 6 TUV 8 WXYZ STORE 9 OPER MESSAGE 0 POWER # RECALL "OUTGOING CALL MEMORY EMPTY!" displays.
CDMA 2000 Wireless Local Loop AXW-P800/P1900 Erasing All Numbers in Call History MENU 1 Press 6 (Security) 1 ABC 2 GHI 4 DEF 3 JKL 5 PQRS 7 MENU MNO CLEAR 6 TUV 8 WXYZ 9 OPER POWER 0 # STORE MESSAGE RECALL 2 Enter lock code NOTE: Lock code is set as 0000 from the factory. You can change lock code (see page ??) ENTER LOCK CODE 3 Press 8 (Erase Logs) 4 Select YES by pressing 5 Press STORE or , . EARSE CALL LOGS YES to confirm.
CDMA 2000 Wireless Local Loop AXW-P800/P1900 Is working. The other party can no longer hear you, but you can hear them. 2 Press MENU , 1 again to resume the conversation.. S ILENT KEYPAD You can check your own phone number or save a number during a conversation without transmitting the dial tones to the other party. This function is available only during a telephone conversation. MENU 1 Press , 2 (Silent Key) during conversation. 'SILENT KEY' blinks to indicate the function is working.
CDMA 2000 Wireless Local Loop AXW-P800/P1900 S ELECTING TIME MODE MENU 1 Press , 3 (Time), 5 (Time Mode). 2 Select time display mode by pressing or , . TIME MODE AM/PM AM/PM: Display 0~12 hours with A or P indicator 24 Hour: Display 00~24 hours 3 Press to save change. S ETTING THE ALARM You can set the alarm sound daily or one time only. 1 Press MENU , 3 (Time), 1 (Alarm). ALARM 2 Select "SET" by pressing STORE press . 3 Enter alarm time and press or STORE , RELASE and 07 : 00am 22 : 32pm .
CDMA 2000 Wireless Local Loop AXW-P800/P1900 C HECKING AND CLEARING CALL TIMES Checking the Last Call Time MENU 1 Press , 3 (Time), 2 (Last Call). MENU 2 Press to clear the display.
CDMA 2000 Wireless Local Loop AXW-P800/P1900 S ETTING WARNING ALERT You can set your phone to sound warning beeps that indicate: - each minute you are on a phone call - when you are out of the service area Setting/Releasing 1 Minute Alert MENU 1 Press , 4 (Sound), 4 (1 Min Alert). 2 Select ON or OFF by pressing or , STORE 3 Press .
Advanced Feartures Changing Greeting Message System Reset Restricting Use of the Phone Locking the Phone Changing the Lock Code Tone Length and Back Light
CDMA 2000 Wireless Local Loop AXW-P800/P1900 C HANGING GREETING MESSAGE This feature lets you change the greeting message that the phone displays while it's standby. MENU 1 Press 6 (Security). 2 Enter lock code. NOTE: Lock code is set as 0000 from the factory. 1. GREETING 2. CHANGE CODE To change lock code (see page ??) 3 Press 1 (Greeting). Current greeting displays. STORE 4 Press to change greeting. DO NOT TOUC_ 5 Enter your new greeting message by pressing the alphanumeric keys.
CDMA 2000 Wireless Local Loop AXW-P800/P1900 R ESTRICTING USE OF THE PHONE You can restrict the use of the phone by unauthorized persons. Restricting Outgoing Calls MENU 1 Press 6 (Security). 1 ABC 2 GHI 4 DEF 3 JKL 5 PQRS 7 MENU MNO CLEAR 6 TUV 8 WXYZ STORE 9 OPER MESSAGE 0 POWER # RECALL 2 Enter lock code. NOTE: Lock code is set as 0000 from the factory. To change lock code (see page ??) 3 Press 3 (Restrict), 1 (Outgoing). 4 Select "ON" by pressing or , . 5 Press to save change.
CDMA 2000 Wireless Local Loop AXW-P800/P1900 L OCKING / UNLOCKING THE PHONE You can lock your phone so that calls cannot be made by unauthorized persons. You can still receive incoming calls. Turning the phone off does not erase this feature; the phone stays in mode until you reset it. MENU 6 (Security) 1 Press 2 Enter lock code 3 Press 6 (Auto Lock) 5 Select "ON" or "OFF" by pressing STORE 6 Press to save the change. or , . FRI - LOCKED 10/11 2:44P NOTE1: When locked, the phone display ?LOCKED-.
CDMA 2000 Wireless Local Loop AXW-P800/P1900 T ONE LENGTH AND BACK LIGHT 1 ABC 2 GHI 4 DEF 3 JKL 5 PQRS 7 MENU MNO CLEAR 6 TUV 8 WXYZ STORE 9 OPER MESSAGE 0 POWER # RECALL Tone Length Some ARS you call may be able to recognize only long tones. You may have to change the tone length to LONG. 1 Press MENU , 5 (Auto Setup), 1 (tone Length) 2.Select "NORMAL" or "LONG" by pressing or , . 3 Press STORE to save the change.
Optional Features Call Forwarding Call Waiting Three-way Calling Message Service
CDMA 2000 Wireless Local Loop AXW-P800/P1900 C all Forwarding Call Forwarding is a feature that lets you forward your incoming calls to another phone number, even if your phone is turned off or is in no service area. Contact your service provider to activate Call Forwarding. C all Waiting Call Waiting alerts you to a second incoming call while you are on the phone. When there's another incoming call, you will hear warning beep.
CDMA 2000 Wireless Local Loop AXW-P800/P1900 M essage Service Message Service is network dependent feature and is available only when your service provider supports it. Check your service provider is providing message service before using this function. 1. NEW 2. SAVED MSG Sending New Text Messages 1 Press MESSAGE , 3 (Send MSG), 1 (New).
CDMA 2000 Wireless Local Loop AXW-P800/P1900 Retrieving Text Message 1 When text message arrives, 'TEXT MESSAGE ARRIVED' displays shortly and appears in 1 ABC 2 GHI 4 DEF 3 JKL 5 PQRS 7 MENU MNO CLEAR 6 TUV 8 WXYZ STORE 9 OPER MESSAGE 0 POWER # RECALL NEW TEXT MESSAGE ARRIVED! the icon line. 2 Press MESSAGE , 2 (Txt Message). 3 Press or , to select message you want STORE to see and press .
CDMA 2000 Wireless Local Loop AXW-P800/P1900 1 ABC 2 Erasing All Message MESSAGE 1 Press 4 (Erase MSG) 2 . 2 Select YES with or , . 3 Press STORE . GHI 4 DEF 3 JKL 5 PQRS 7 CLEAR WXYZ STORE 9 MESSAGE # RECALL 1 ERASE ALL? YES ABC 2 GHI 4 DEF 3 JKL 5 PQRS 7 MENU MNO CLEAR 6 TUV 8 WXYZ STORE 9 OPER MESSAGE 0 POWER MENU MNO 6 TUV 8 OPER 0 POWER # RECALL Setting/Releasing Message Lock 1 Press MESSAGE , 5 (MSG Option), 1 (MSG Lock).
Miscellaneous Menu Option Table Conversation and Message Menu Specifications
CDMA 2000 Wireless Local Loop AXW-P800/P1900 MEMU OPTION TABLE Explanation 1:CALL HISTORY 2:PHONE 1: OUTGOMING Stores ten phone numbers called most recently 2: INCOMING Stores ten phone numbers of calls received most recently Used when searching for a phone number in the phone book by name/number/ stored memory number 1: SEARCH SEARCH OPTION NAME / NUMBER / MEMORY BOOK Used when storing a phone number and name in the phone book 1: STORE 1: ERASE SEARCH OPTION NAME / NUMBER / MEMORY Used when er
CDMA 2000 Wireless Local Loop AXW-P800/P1900 8: ERASE LOGS 9: LANGUAGE 1: DATA PORT 7:DATA SERVICE 2: DS SPEED 3: RECEIVE MODE ERASE HISTORY? NO/YES Erases numbers in outgoing or incoming call history. DISPLAY LANGUAGE ENGLISH/SPANISH DATA PORT SERIAL/USB DS SPEED 115.2Kbps/19.2Kbps Selects user interface language. Selects data port configuration Selects data service speed RECEIVE MODE VOICE ONLY/ASYNC/PC FAX Select incoming call receive mode * The lock code is preset to 0000 at the factory.
Safety Information 1 . SAFETY INFORMATION FOR FIXED WIRELESS TERMINALS .POTE NTIALLY EXPLOSIVE ATMOSPHERES Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cauls e an explosion or fire resulting in bodily injury or even death. . INTERFERENCE TO MEDICAL DIVICES Certain electronic equipment may be shielded against RF signal from you wireless phone.
SAR INFORMATION THIS MODEL PHONE MEETS THE GOVERNMENT ’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF)energy set by the Federal Communications Commission of the U.S.Government.These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
FCC Compliance Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received. Including interference that may cause undesired operation. Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.