CDMA 2000 Wireless Local Loop AXW-P800/P1900 I NTRODUCTION The WLL (Wireless Local Loop) phone operates through a wireless connection instead of a phone wire, linking the subscribers of the general wire phone and the phone office. AXW-P800 & AXW-P1900, a CDMA2000 Fixed Wireless Phone has an elegant design with advanced features. A large 3-line dot matrix liquid crystal display provides user-friendly interface for quick and easy information display.
CDMA 2000 Wireless Local Loop AXW-P800/P1900 T ABLES OF CONTENTS Safety Precautions ........................... 4 Checking Parts ................................. 5 Setting up Your Phone ..................... 6 Getting to Know Your Phone............. 9 Display Icons..................................... 10 Function Keys................................... 11 Basic Operation Placing Calls .....................................13 Redial.................................................13 Receiving Calls.........
CDMA 2000 Wireless Local Loop AXW-P800/P1900 S AFETY PRECAUTIONS 1. Avoid placing the phone in a dusty location, or near a source of gas or fire. 2. Don’t shake, hit or drop the phone. 3. If you clean the outside of the phone, use only a soft, dry cloth. The chemicals in alcohol, benzine or acetone can damage the surface of the phone. 4. Do not twist or pull the cord out of the phone. 5. Do not disassemble the phone. 6. DO NOT use the power adapter if: • The power cord is damaged.
CDMA 2000 Wireless Local Loop AXW-P800/P1900 C HECKING THE PARTS Once you have unpacked your phone, make sure that you have all the parts shown below. If any piece is missing or broken, please call your customer service. 1. Main Unit 3. AC/DC Adapter 5. Antenna 7. Stand / Wall mount bracket 2. Handset 4. User's Manual 6.
CDMA 2000 Wireless Local Loop AXW-P800/P1900 S ETTING UP YOUR PHONE Installing the phone This phone operates by receiving DC power from the AXESSTEL power adapter, which is connected to electrical outlet. The phone is equipped with a rechargeable battery to back up AC power failure.
CDMA 2000 Wireless Local Loop AXW-P800/P1900 S ETTING UP YOUR PHONE Wall mount installation 1. Mark two mounting hole locations on the wall. 2. Drill two holes at the marked location. 3. Attach the wall mountable bracket. 4. Tighten the screws firmly. 5. Plug in power connector and route the cords in a groove. 6. Install the phone onto the wall mount bracket hook. Push the phone against the wall and pull it down to lock. 7. Screw the antenna into antenna connector. 8.
CDMA 2000 Wireless Local Loop AXW-P800/P1900 S ETTING UP YOUR PHONE Service Status Check Display in service area When the power cord is connected properly, all segments in the LCD window will turn on briefly and Power LED will light. The number of bars of signal strength indicator (antenna icon) indicates the strength of service signal of the area. The display will show the greeting (AXESSTEL as default), time and date. You can change the greeting. (See page 34.
CDMA 2000 Wireless Local Loop AXW-P800/P1900 S ETTING UP YOUR PHONE Installing the battery 1. Remove screws with a screw driver and remove the battery cover on the bottom of the phone. 2. Plug in battery connector. 3. Replace the battery cover and screws.
CDMA 2000 Wireless Local Loop AXW-P800/P1900 C ETTING TO KNOW YOUR PHONE 1 ABC DEF MENU CLEAR GHI JKL MNO PQRS TUV WXYZ STORE MESSAGE OPER RECALL POWER 1 Antenna: Adjusting the antenna improves the sound quality of the call. 2 MENU: Press to access the phone's menus. 3 CLEAR: Lets you clear your last entry. 4 STORE: Stores phone numbers, and any settings you select in the menu within the phone's memory 5 MESSAGE: Press to retrieve messages.
CDMA 2000 Wireless Local Loop AXW-P800/P1900 D ISPLAY ICONS Icons display on the screen to indicate what features you are using, signal strength and battery status etc... AXESSTEL THU 10/09 2:32P Indicates the strength of the current signal. The more bars, the stronger the signal. Indicates the level of battery power. The more bars, the more power. When the battery is low, the icon blinks and an alert tone sounds. MENU Indicates that you are using the phone's menu.
CDMA 2000 Wireless Local Loop AXW-P800/P1900 F UNCTION KEYS MENU Press this key to display the phone's main menu. STORE MESSAGE CLEAR RECALL Press this key to store a phone number in the phone book to save menu settings. Press this key to retrieve messages. Clears information from the display screen. - To erase one character from the display screen, press it once. - To erase all the characters on the screen, press and hold down. - To go back one step in menu mode, briefly press it once.
Basic Operation Placing Calls Redial Receiving Call Adjuting Volumes Choosing the Ring Tone On-Hook Call
CDMA 2000 Wireless Local Loop AXW-P800/P1900 P LACING CALLS 1 Make sure your phone is turned on. 2 Pick up the handset to hear a dial tone. When the phone fails to acquire service signal, you will hear "No Service"tone (intermittent tone). 3 Dial the number to call. The LCD window displays the number. RECALL 4 Wait for a moment or press . 5 When the other person answers, begin your conversation. 6 To end the call, replace the handset. PLEASE DIAL CALLING....
CDMA 2000 Wireless Local Loop AXW-P800/P1900 H AND FREE CALL This feature allows you to make a call without picking up the handset. 1 Press . 2 Enter the phone number you want to call. 3 When you hear the other party answer, begin the conversation. For privacy conversation, just pick up the handset and continue conversation. NOTE: Unintended OFF-HOOK recognition.
CDMA 2000 Wireless Local Loop AXW-P800/P1900 A DJUSTING VOLUMES you can control the sound volumes including the key tone, earpiece, speaker and the ringer 1 ABC 2 GHI 4 DEF 3 JKL 5 PQRS 7 MENU MNO CLEAR 6 TUV 8 WXYZ STORE 9 OPER MESSAGE 0 POWER # RECALL Controlling key tone volume Press 1 ABC 2 GHI 4 DEF 3 JKL 5 PQRS 7 MENU MNO CLEAR 6 TUV 8 WXYZ STORE 9 OPER MESSAGE 0 POWER # RECALL repeatedly until it reaches proper volume.
Phone book The Internal Phone Book Storing Numbers in Memory Searching for Numbers in Memory Erasing a Number in Memory One-Touch Calling Two-Touch Calling
CDMA 2000 Wireless Local Loop AXW-P800/P1900 T HE INTERNAL PHONE BOOK Your phone has an internal "Phone Book" in which you can store up to 99 frequently calling names and numbers. S TORING NUMBERS IN MEMORY 1 Enter , 2 , 2 . 2 Enter name by pressing the alphanumeric keypad STORE and press . NOTE1: If you do not want to enter name, just press. STORE here. The number will be save as "No Name". NOTE2: Name entry is limited to maximum 16 letters.
CDMA 2000 Wireless Local Loop AXW-P800/P1900 has already been stored, "OVERWRITE?" will STORE display. Press to overwrite or press KEEP SECRET ? to go back to automatic location. STORE 8 "KEEP SECRET?" displays. Press if no secret feature is necessary. To store the number in secret, select "YES" STORE by pressing or , and press . NOTE: Secretly saved number won't be displayed unless password is entered. Seed-dialing to secretly saved number will prompt password entry.
CDMA 2000 Wireless Local Loop AXW-P800/P1900 1 Searching by Phone Number ABC 2 GHI 4 DEF 3 JKL 5 PQRS 7 MENU MNO CLEAR 6 TUV 8 WXYZ STORE 9 OPER MESSAGE 0 POWER # RECALL 1 Press MENU 2 (Phone book), 1 (Search), 2 (number) 2 Enter all or part of the number you remember and press STORE PHONE NUMBER? . 3 The phone displays the memory location numbers and names which has the number matches your entry.