设计 日期 变更内容 REV. DESIGN DATE CONTENTS 01 尹妮 20190715 新建 标记 处数 MARK 210 mm 版本 AXENT.ONE PLUS USER MANUAL 142.5 mm 技术要求 机型编号 TYPE AXENT.ONE 美国款 1. 2. 3. 4. 5. 印刷字体需清晰、均匀、平整、无重影; 尺寸为 142.5×210mm,公差 ±1mm; 装订方式:骑马钉; 黑白印刷; 所有材料满足欧盟包材指令要求和 REACH 要求。 设计 DESIGN 审核 尹妮 20190715 材料 封面 200g 铜版纸(覆哑膜) MATERIAL 内页 128g 铜版纸 名称 TITLE 编号 CHECK 工艺 图幅 PROCESS SIZE A4 单位 STANDARDIZE UNIT 第 APPROVE SHEET 1 张 共 OF 224000019500 1:2 SCALE 标準化 批準 PART NO.
AXENT.
THANK YOU Thank you for selecting an AXENT Switzerland product. To ensure proper installation, please review these instructions carefully before use. Carefully unpack and examine the intelligent toilet before installation. For any questions, contact us at 1-800-769-4857. Thank you again for choosing AXENT. BEFORE YOU BEGIN CAUTION! Risk of personal injury or product damage Handle with care. Vitreous china can break or chip if handled carelessly.
USER MANUAL AXENT.
SMARTPHONE APP CONNECT YOUR AXENT INTELLIGENT TOILET WITH OUR APP 9:41 AM 100% Rear wash Lady wash Stop Night light ECO Drainage System purge Standby Setting The AXENT Remote App can be used as an individualized remote control with the AXENT. ONE PLUS. www.axentbath.
SAFETY SAFETY SYMBOLS The following symbols in the manual will highlight hazardous situations and their severities. DANGER! High Risk, Lethal Hazards, Severe Injuries WARNING! Medium Risk, Severe Injuries CAUTION! Low Risk, Minor Injuries NOTE! Damage to Property NORMAL USAGE The intelligent toilet’s spray arm attachment should only be used for the rear wash and front wash cleaning functions. The product may also be used as a normal toilet seat. This product is meant for indoors usage only.
SAFETY WARNING! To reduce the risk of burns, electrocution, fire, or injury to persons. ■■ Children or disabled persons may require supervision during use. ■■ Use this product only for its intended use as described in this manual. ■■ Do not use attachments not authorized by the manufacturer. ■■ Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water.
SAFETY ■■ Do not climb on or stand on the product. ■■ Do not place any heavy objects on the lid. ■■ Do not open or close the lid or seat with force. ■■ Do not deliberately soil, spray or block the spray arm. Repairs should only be carried out by a person with the necessary expertise ■■ Do not carry out modifications, tamper with, install additional equipment, or attempt to repair the intelligent toilet. ■■ Improperly performed repairs can lead to accidents, injuries, or damage to the product.
SAFETY GROUNDING INSTRUCTIONS This product must be grounded when plugged in. The power cord on this product has a grounding plug and must be plugged into an outlet with a properly grounded grounding plug. DANGER! Improper use of grounding plug can result in a risk of electric shock. For safety, the intelligent toilet should be plugged into a standard 3 prong GFCI outlet.
SAFETY FCC INSTRUCTIONS Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
INTRODUCTION OVERVIEW [320-E2] MAIN Lid Rear cover Multifunction Dial Indicator Nozzle Seat Multifunction Dial 9
INTRODUCTION REMOTE CONTROL INTERFACE User Rear Wash Front Wash Dry Massage Water Flow Position Stop System Purge Light Descale Mute Setting Eco When receiving remote control Command received and executed, the intelligent toilet will make the following sounds: One short «beep» Command received and executed Two short «beep» Command received but not executed One long «beep» Remote control is not in range TURNING ON Install batteries to turn on remote control.
OPERATION WITH MAIN OPERATION DIAGRAM QUICK START REGULAR USE .ONE .ONE .ONE .
OPERATION WITH MAIN REAR WASH After you are seated: QUICK START Press the Multifunction dial to start. REGULAR Turn the Multifunction dial counter clockwise to start. Press the Multifunction dial to stop the Rear Wash immediately. If not stopped manually, the Rear Wash will stop automatically after 3 minutes. The system will always clean itself after use. This cannot be disabled. FRONT WASH After you are seated: Turn the Multifunction dial clockwise to start.
OPERATION WITH MAIN WATER VOLUME During Rear or Front Wash: Turn the Multifunction dial clockwise to increase the water volume. Turn the Multifunction dial counter clockwise to reduce the water volume. SPRAY ARM POSITION During Rear or Front Wash: Press and hold the Multifunction dial. 2 Turn it clockwise to move the Spray Arm forward. Press and hold the Multifunction dial. Turn it counter clockwise to move the Spray Arm backward.
OPERATION WITH MAIN TEMPERATURE ADJUSTMENT During Rear Wash, Front Wash, or Dry: Pull the Multifunction dial. 2 Turn it clockwise to increase the temperature. Pull the Multifunction dial. Turn it counter clockwise to reduce the temperature. 2 When Auto Dry setting is on, you can start the Dryer function through the Multifunction dial. Please find more about Auto Dry Setting on page 17 for the Multifunction dial or page 22 for remote control.
OPERATION WITH MAIN LEVEL 1 > MUTE SETTING Factory setting: OFF LEVEL 1 is activated, Turn the Multifunction dial counter clockwise. -- ON One time short «beep» -- OFF Two times short «beep» When the Mute setting is on, the system will not play back any sounds. LEVEL 1 > SEAT HEATING SETTING Factory setting: ON LEVEL 1 is activated, Press and hold the Multifunction dial. 2 Turn it clockwise.
OPERATION WITH MAIN LEVEL 2 When the Multifunction dial is already in LEVEL 1: Press and hold the Multifunction dial until the ambient light flashes quickly to activate LEVEL 2. To deactivate LEVEL 2, press the multifunction dial while LEVEL 2 is active. The ambient light will stop flashing and you will hear one single «beep». Level 1 is now deactivated. If no functions are accessed in 3 minutes, LEVEL 2 will automatically deactivate.
OPERATION WITH MAIN LEVEL 2 > AUTO DRY SETTING Factory setting: OFF LEVEL 2 is activated, Press and hold the Multifunction dial. 2 Turn it counter clockwise. -- ON One time short «beep» -- OFF Two times short «beep» When the Auto Dry setting is ON, the Dry function will be started after pressing the Multifunction dial to stop Rear or Front wash. LEVEL 2 > SYSTEM RESET LEVEL 2 is activated, Pull the Multifunction dial. 2 Turn it counter clockwise to start System Reset.
OPERATION WITH REMOTE CONTROL Rear Wash Front Wash Dry Massage Water Flow Position Stop REAR WASH After you are seated: Press « Rear Wash » to start. Rear Wash Press « Stop » to stop the Rear Wash immediately. Stop If not stopped manually, the Rear Wash will stop automatically after 3 minutes. FRONT WASH After you are seated: Press « Front Wash » to start. Front Wash Press « Stop » to stop the Front Wash immediately.
OPERATION WITH REMOTE CONTROL Rear Wash Front Wash Dry Massage Water Flow Position Stop System Purge Light Descale Mute Setting Eco OSCILLATING AND PULSATING SHOWER During Rear or Front wash: Massage Press « Massage » to switch between Oscillating, Pulsating, Oscillating and Pulsating, and OFF. SPRAY ARM POSITION During Rear or Front wash: Press « Position » to adjust the position of the spray arm. Position -- Press « Reduce » to move the Spray Arm backward.
OPERATION WITH REMOTE CONTROL TEMPERATURE ADJUSTMENT Temp Seat Temp Temp Water Temp Temp Air Temp Press « Temp » repeatedly until the symbol « Seat Temp » lights up to activate seat temperature adjustment; Or press « Temp » repeatedly during Rear or Front Wash until the symbol « Water Temp » lights up to activate water temperature adjustment; Or press « Temp » repeatedly during Dry until the symbol « Air Temp » lights up to activate air temperature adjustment.
OPERATION WITH REMOTE CONTROL User System Purge Light Descale Mute Setting Eco NIGHT LIGHT SETTING Factory setting: Light AUTO Press « Light » to enter into the setting. The « Light » indicator indicates the selected level. Press « Light » to switch between ON, AUTO and OFF. -- ON The indicator light remains on. -- AUTO The indicator blinks 3 times and turns on. -- OFF The indicator blinks for one second and turns off.
OPERATION WITH REMOTE CONTROL DEODORIZE SETTING Factory setting: Setting Mute ON Press « Setting » at the same time « Mute » to enter into the setting. The « Mute » indicator indicates the selected level. Press « Mute » to turn the function on or off. -- ON The indicator light remains on. -- OFF The indicator blinks for one second and turns off. The deodorizer function is activated when a user is seated.
MAINTENANCE SPRAY ARM CLEANING When the unit is not in use, OPERATION WITH MULTIFUNCTION DIAL LEVEL 2 is activated (see page 16 for operation): Turn the Multifunction dial clockwise to extend the spray arm for cleaning. Clean the spray arm with a fabric or a soft bristle brush. Turn the Multifunction dial clockwise again to retract the spray arm. OPERATION WITH REMOTE CONTROL Press « Descale » to extend the spray arm for cleaning. Descale Clean the spray arm with a fabric or a soft bristle brush.
MAINTENANCE SYSTEM PURGE OPERATION WITH MULTIFUNCTION DIAL LEVEL 1 is activated (see page 14 for operation): Turn the Multifunction dial clockwise to start System Purge with one «beep». -- The system purge process stops automatically after completion. Turn the Multifunction dial clockwise again to stop system purge immediately. OPERATION WITH REMOTE CONTROL System Purge Press « System Purge » to start System Purge with one «beep». -- The system purge process stops automatically after completion.
MAINTENANCE INTERNAL RECYCLE DESCALING When the unit is not in use, OPERATION WITH MULTIFUNCTION DIAL LEVEL 2 is activated (see page 16 for operation): Pull and turn the Multifunction dial clockwise to drain the water out of the residual water and extend the spray arm. 2 Dip the spray arm into the cup prepared with 200ml of scale solvent. The solvent will be absorbed by the spray arm which will then retract back into the toilet.
MAINTENANCE DRAINING RESIDUAL WATER FROM THE SYSTEM OPERATION WITH MULTIFUNCTION DIAL LEVEL 1 is activated (see page 14 for operation): 2 Pull and turn the Multifunction dial counter clockwise to drain residual water in the system. -- The function will stop automatically after completion. Turn the Multifunction dial counter clockwise again to stop the process immediately.
MAINTENANCE DURING VACATION If this product will not be in use for an extended period of time, please perform the following in this order. -- Disconnect the electrical power. -- Shut off the water inlet valve. WINTERIZATION Please ensure water temperatures will not drop below 4 °C (39 °F). Frost or frozen water will damage the system and may lead to leakage. If the water or ambient temperature drops below 4 °C (39 °F), please discontinue use of product. -- Disconnect the electrical power.
MAINTENANCE UNINSTALLING AND INSTALLING THE LID AND SEAT Lift up the toilet seat and toilet lid. Remove the toilet seat and toilet lid by vertically lifting them out of the bracket. INSTALLING THE LID AND SEAT Insert the toilet seat and toilet lid vertically from above in to the bracket in the same way as removed. Connect one tab by pushing down and inserting into the slot on the bracket. Repeat for the other tab.
TROUBLESHOOTING ELECTRICAL SHOCK! FATAL DANGER! Never open the unit to perform repairs on your own. Never modify the device or add an any additional modules. The AXENT intelligent toilet carries live power when plugged in and opening it exposes those present to fatal danger! Warranty and liability claims as a result of wrong handling are specifically excluded. RESTART Perform a reset, if needed. Unplug the AXENT intelligent toilet, wait for 30 seconds, then reconnect to power.
TROUBLESHOOTING MALFUNCTION CAUSE SOLUTION Unsupported device Please check the model to make sure if your device have the function. DRY Dryer does not work Seat does not sense person Reconfirm position on seat. Low air temperature Air temperature set too low Increase air temperature. No air temperature Increase air temperature. Air temperature set off MASSAGE Does not work Can only be activated during Restart massage during Front or Rear wash.
TROUBLESHOOTING MALFUNCTION CAUSE SOLUTION SELF-CLEANING Spray arm retracts Wand will automatically automatically retract after 3 minutes of Restart Self-cleaning again. during Descale proinactivity cess Water spraying out There is a conductor on the during Spray arm seat, such as water, wet pa- Remove the conductor. cleaning process per, etc. WARNING Continuous « beep » Water temperature exceeds Disconnect the main plug and contact customer service.
TECHNICAL DATA ITEM DESCRIPTION Nominal voltage 120 V~, 60 Hz Power consumption ( max. ) 1100W Protection degree IPX4 Cable length 1.1 m ( 435/16 inches ) Recommended pressure range 0.21 - 0.55 MPa ( 30 - 80 psi ) (bidet portion only) Minimum and Maximum pres- 0.14- 0.
OPERATION WITH REMOTE CONTROL GUARANTEE AXENT LIMITED WARRANTY A three-year limited warranty applies to all AXENT products purchased on or after May 1, 2019. All products purchased on or before April 30, 2019 OR purchased for use in a commercial or hospitality setting on any date are backed by AXENT’s one-year limited warranty. 1.
www.axentbath.us support@axentproducts.com 1-800-769-4857 P\N: 224000019500 AXENT Corporation Ltd.