版本 设计 日期 变更内容 REV. DESIGN DATE CONTENTS 01 尹妮 20200623 尹妮 20200907 MARK 新建 1、封面增加“E314”字样 2、P34 增加换修备件 3、P35 更新产品净重、水压范围 4、P30 增加连接件及转轴维护说明 5、P4-P5 修改排版 250 mm 02 标记 处数 AXENT.ONE C PLUS E314 USER MANUAL 200 mm 机型编号 TYPE E314 技术要求 1. 2. 3. 4. 5.
AXENT.
THANK YOU Thank you for selecting an AXENT Switzerland product. To ensure proper installation, please review these instructions carefully before use. Carefully unpack and examine the intelligent toilet before installation. For any questions, contact us at 1-800-769-4857. Thank you again for choosing AXENT. BEFORE YOU BEGIN CAUTION! Risk of personal injury or product damage Handle with care. Vitreous china can break or chip if handled carelessly.
USER MANUAL AXENT.
SMARTPHONE APP CONNECT YOUR AXENT INTELLIGENT TOILET WITH OUR APP 9:41 AM 100% Rear wash Lady wash Stop Night light ECO Drainage System purge Standby Setting The Axent Remote App can be used as an individualized remote control with the Axent One C Plus. www.axentbath.
SAFETY SAFETY SYMBOLS The following symbols in the manual will highlight hazardous situations and their severities. DANGER! High Risk, Lethal Hazards, Severe Injuries WARNING! Medium Risk, Severe Injuries CAUTION! Low Risk, Minor Injuries NOTE! Damage to Property NORMAL USAGE The intelligent toilet’s spray arm attachment should only be used for the rear wash and front wash cleaning functions. The product may also be used as a normal toilet seat. This product is meant for indoors usage only.
SAFETY WARNING! To reduce the risk of burns, electrocution, fire, or injury to persons Children or disabled persons may require supervision during use. Use this product only for its intended use as described in this manual. Do not use attachments not authorized by the manufacturer. Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the product to a service center for examination and repair.
SAFETY GROUNDING INSTRUCTIONS This product must be grounded when plugged in. The power cord on this product has a grounding plug and must be plugged into an outlet with a properly grounded grounding plug. DANGER! Improper use of grounding plug can result in a risk of electric shock For safety, the intelligent toilet should be plugged into a standard 3 prong GFCI outlet. If repair or replacement of the power cord or plug is necessary, do not connect the grounding wire to either flat blade terminal.
INTRODUCTION OVERVIEW E314-02 REMOTE CONTROL Activate the remote control by inserting the batteries. For safety purposes, some functions, including the bidet, are only functional when the user is seated on the toilet seat.
INTRODUCTION MAIN The intelligent toilet can be easily operated by the multi-functional dial and flush button. Manual Flush Button Multi-functional Dial MANUAL FLUSH Press the Manual Flush Button located behind the multifunction knob to flush the toilet.
MULTI-FUNCTION DIAL QUICK START AXENT.ONE C PLUS offers a Quick Start function. Sit down on the toilet seat and push the dial. Rear Wash starts and will stop after another push on the button. The spray arm is automatically cleaned with water before and after each washing procedure.
MULTI-FUNCTION DIAL REGULAR USE Rear Wash Adjusting water volume Front Wash Adjusting water temperature Stop 10 Adjusting nozzle position
MULTI-FUNCTION DIAL ADDITIONAL FEATURES Additional settings and service functions may also be accessed with the multifunction dial. Access is done at two levels. LEVEL 1 -- Mute ON / OFF -- Seat heating ON / OFF -- Self-cleaning function ON / OFF -- System purge LEVEL 2 -- Night light ON / AUTO / OFF -- Deodorizer ON / OFF -- Auto dry -- Spray arm cleaning -- System reset ACTIVATING LEVEL 1 To activate LEVEL 1, press and hold the multifunction dial until the ambient light flashes slowly.
MULTI-FUNCTION DIAL LEVEL 1 MUTE ON / OFF Factory setting: Mute is OFF When the multifunction dial is already at LEVEL 1 (the ambient light will flash slowly): -- Turn the multifunction dial counter clockwise. No «beep»: Short «beep»: LEVEL 1 Mute is ON Mute is OFF SEAT HEATING Factory setting: ON / OFF/AUTO Seat heating is ON When the multifunction dial is already at LEVEL 1 (the ambient light will flash slowly): -- Press and hold the multifunction dial. -- Turn it clockwise.
MULTI-FUNCTION DIAL LEVEL 1 SELF-CLEANING FUNCTION ON / OFF As soon as you sit down on the toilet seat, the spray arm will be cleaned with fresh water. This function can be turned ON or OFF. Factory setting: 2 Self-cleaning function is ON When the multifunction dial is already at LEVEL 1 (the ambient light will flash slowly): -- Press and hold the multifunction dial. -- Turn it counter clockwise.
MULTI-FUNCTION DIAL ACTIVATE FUNCTIONS AT LEVEL 2 When the multifunction dial is already at LEVEL 1, press and hold the dial again until the ambient light flashes quickly. The mode level 2 is activated when the ambient light continues to flash quickly. DEACTIVATE FUNCTIONS AT LEVEL 2 When the multifunction dial is already at LEVEL 2, push the dial. The ambient light will stop flashing and you will hear one single «beep». The mode level 2 is deactivated.
MULTI-FUNCTION DIAL LEVEL 2 DEODORIZER ON / OFF Factory setting: Deodorizer is ON The deodorizer function is activated when a user is seated. When the multifunction dial is already at LEVEL 2 (the ambient light will flash quickly): -- Press and hold the multifunction dial. -- Turn it clockwise.
MULTI-FUNCTION DIAL LEVEL 2 SPRAY ARM CLEANING When the multifunction dial is already at LEVEL 2 (the ambient light will flash quickly): -- Turn the multifunction dial clockwise. The spray arm will move out. -- Clean the spray arm with fabric or a soft bristled brush. -- Turn the multifunction dial clockwise again to retract the spray arm. LEVEL 2 SYSTEM RESET When the multifunction dial is already at LEVEL 2 (the ambient light will flash quickly): -- Pull the multifunction dial.
MULTI-FUNCTION DIAL STAND-BY MODE Press and hold the multifunction dial until the ambient light is off to activate Stand-By mode. In StandBy mode, all functions of the toilet will deactivate until reactivated. Gently tap the toilet seat lid to deactivate Stand-By mode. PAIRING TO DIAL Cut off the power to the intelligent toilet, wait for 30 seconds, and then reapply power.
REMOTE CONTROL REMOTE CONTROL Lid Seat Rear Wash Massage Close Flush User Front Wash Dry Stop Water Flow Position System Purge Light Descale Mute Setting Eco REMOTE CONTROL ON/OFF/REPLACING BATTERIES ON: Insert batteries. OFF: Remove batteries. Replacing batteries: When power is below 15%, the first and last of Level Indicator will blink on and off, indicating the battery needs to be replaced. Do NOT insert new and old batteries together in the remote control.
REMOTE CONTROL PAIRING Cut off the power to the intelligent toilet, wait for 30 seconds, and then reapply power. Stops After three times «beep», start pairing by pressing « Stop » repeatedly until hearing three times long «beep» from the intelligent toilet, which means pairing successful. Pairing has originally been done in the factory. It is only necessary after the remote control has been replaced.
REMOTE CONTROL FRONT OF REMOTE CONTROL Rear Wash Front Wash Dry Massage Water Flow Position REAR WASH Press « Rear Wash » after you are seated to start. Rear Wash Stop Press « Stop », to stop the Rear Wash early. If not stopped manually, the Rear Wash will stop automatically after 3 minutes. FRONT WASH Press « Front Wash » after you are seated to start. Front Wash Stop Press « Stop », to stop the Front Wash early. If not stopped manually, the Front Wash will stop automatically after 3 minutes.
REMOTE CONTROL WATER VOLUME Press « Water Volume » during Rear or Front Wash to adjust the water volume. Water Volume The Level Indicator indicates the selected level. Press « Minus » to reduce the water volume. Minus Press « Plus » to increase the water volume. Plus SPRAY ARM POSITION Position Press « Position » during Rear or Front Wash to adjust the position of the spray arm. The Level Indicator indicates the selected level. Press « Minus » to move the Spray Arm backward.
REMOTE CONTROL FRONT OF REMOTE CONTROL Rear Wash Front Wash Dry Massage Water Flow Position Stop TEMPERATURE ADJUSTMENT To adjust the seat, water, or air dryer temperature, press « Temp » repeatedly until the respective icon lights up. Temp Seat Temp Water Temp Air Temp Press « Minus » to reduce the temperature. Minus Press « Plus » to increase the temperature.
REMOTE CONTROL TOP OF REMOTE CONTROL Lid Seat Close Flush User BACK OF REMOTE CONTROL System Purge Light Descale Mute Setting Eco NIGHT LIGHT SETTING Factory setting: Light AUTO mode – The night light turn ON or OFF automatically according to ambient light levels. Press « Light » to enter into the setting. Press « Light » to switch amount ON, OFF and AUTO. The indicator indicates the selected option: -- AUTO The indicator blinks 3 times and turns on.
REMOTE CONTROL TOP OF REMOTE CONTROL Lid Seat Close Flush User BACK OF REMOTE CONTROL System Purge Light Descale Mute Setting Eco AUTO OPEN SETTING Factory setting: Auto Open will only open the lid. Setting Press « Setting » at the same time « Lid » to activate Auto Open Setting. Press « Lid » repeatedly to switch among OFF, Lid and Seat. Lid The Level Indicator indicates the selected level: -- OFF One indicator on. -- Lid Three indicators on. -- Seat Five indicators on.
REMOTE CONTROL AUTO CLOSE SETTING Factory setting: Auto Close function is ON. Setting Press « Setting » at the same time « Close » to activate Auto Close. Press « Close » repeatedly to enable or disable Auto. Close The Level Indicator indicates the selected level: -- OFF One indicator on. -- ON Five indicators on. AUTO FLUSH SETTING Factory setting: Auto Flush function is 15 seconds. Setting Press « Setting » at the same time « Flush » to activate Auto Flush Setting.
REMOTE CONTROL BACK OF REMOTE CONTROL System Purge Light Descale Mute Setting Eco SELF CLEANING SETTING Factory setting: Self Cleaning function is ON. Setting Eco Press « Setting » at the same time « Eco » to turn the function on or off. When the Self Cleaning function is turned on, as soon as you sit down on the toilet seat, the spray arm will be cleaned with fresh water. The indicator indicates the selected option: -- ON The indicator light remains on.
REMOTE CONTROL SPRAY ARM CLEANING Press « Descale » to extend the spray arm for cleaning. Descale The spray arm will move out. -- Clean the spray arm with a fabric or a soft bristle brush. -- Press « Descale » again to retract the spray arm. If no other functions are used, the spray arm will automatically retract after 3 minutes. RESET Remove the batteries to turn off the remote control. Eco Press « Eco » , « Setting » and insert batteries at the same time.
MAINTENANCE DURING VACATION If this product will not be in use for an extended period of time, please perform the following in this order: -- Disconnect the electrical power. -- Shut off the water inlet valve. -- Press the Manual Flush button. WINTERIZATION Please ensure water temperatures will not drop below 39 °F. Frost or frozen water will damage the system and may lead to leakage. If the water or ambient temperature drops below 39 °F , please discontinue use of product.
MAINTENANCE CLEANING INSTRUCTIONS SEAT, LID AND BACK COVER Use a mild soap solution to clean the seat. Please take care that the seat and hinges are not left damp. Dry off any residual water or cleaning agent with a soft cloth. Ensure that the seat and seat hinges do not come in contact with abrasive, corrosive, or chlorine-based cleaners, as these may cause damage or lead to flash rust.
MAINTENANCE UNINSTALLING AND INSTALLING THE LID AND SEAT INSTALLING THE LID AND SEAT CLEANING HINGES The hinges and contact areas on the toilet seat and cover must be cleaned regularly. This ensures the proper function of the intelligent toilet. Hinges Contact Areas -- Clean up the contact areas on the cover with moistened cloth. -- Clean up the hinges bolts on toilet seat with a damp cloth. Do NOT use any cleaning agents for cleaning .
TROUBLESHOOTING ELECTRICAL SHOCK! FATAL DANGER! Never open the unit in order to repair it yourself. Never modify the device or add any additional modules. The AXENT intelligent toilet carries live power when plugged in and opening it exposes those present to fatal danger! Warranty and liability claims as a result of wrong handling are specifically excluded. RESTART Perform a reset, if needed. Unplug the AXENT intelligent toilet, wait for 30 seconds, then reconnect to power.
TROUBLESHOOTING Malfunction Cause Solution Dryer does not work Seat does not sense person Reconfirm position on seat. 21 Low air temperature Air temperature set too low Increase air temperature. 22 Massage does not work Can only be activated during the wash cycle Restart massage during Front or Rear wash. 20 Low seat temperature Seat temperature set too low Increase seat temperature. 22 High seat temperature Seat temperature set too high Reduce seat temperature.
TROUBLESHOOTING Malfunction Cause Solution Page Night light does not work Night light in OFF mode Switch night light setting to ON or AUTO mode. 23 Night light always on Night light in ON mode Switch night light setting to AUTO or OFF mode. 23 Spray arm retracts automatically during Descale process. Wand will automatically retract after 3 minutes of inactivity. Please restart the Descale process.
TROUBLESHOOTING REPLACEMENT PARTS LIST Individual instructions will be included with applicable replacement parts.
TECHNICAL DATA Nominal voltage Power consumption ( max. ) Protection degree Cable length 120 V~, 60 Hz 1300 W IPX4 1.1 m ( 435/16 inches ) Recommended Pressure Range Ambient Temperature Range Water Temperature Range Product Weight Product Dimension ( L × B × H ) Maximum Load (Seat and Lid) 0.14 - 0.75 MPa ( 20 - 108 psi ) 4 - 40 °C ( +39 to +104 °F ) 4 - 35 °C ( +39 to +95 °F ) 42 kg ( 93lbs ) 725 × 403 × 500 mm ( 281/2 × 157/8 × 193/5 inches ) 150 kg ( 330 lbs ) Max. flow rate Rear Wash Max.
GUARANTEE AXENT LIMITED WARRANTY A three-year limited warranty applies to all AXENT products purchased on or after May 1, 2019. All products purchased on or before April 30, 2019 OR purchased for use in a commercial or hospitality setting on any date are backed by AXENT’s one-year limited warranty. All spare parts purchased for use with Axent products are covered by a six (6) month limited warranty unless otherwise stated on the product. 1.
www.axentbath.us support@axentproducts.com 1-800-769-4857 P\N: 224000033800 AXENT Corporation Ltd. 20-2.
