Specification Sheet

®
®
DYNAMIC VOCAL MICROPHONE
MC-20
ANY QUESTIONS? VISIT US AT AXCESSABLES.COM
PACKAGE INCLUDES
CONNECTING AND DISCONNECTING THE XLR CABLE HOW TO AVOID A FEEDBACK LOOP
7.25”
The MC-20 Dynamic Microphone is designed with a presence boost
to enhance output and clarity for lead vocals.
Cardioid polar pattern picks up audio from the source while
rejecting unwanted noise.
Noise-free On/Off switch provides silent control of the microphone.
Updated industrial design with black, metallic finish and grille.
Comes with a 10-foot XLR-to-TRS microphone cable.
Package contains standard microphone clip for mic stand mounting.
Pouch included for extra protection during transport or storage.
Features
NOISE-FREE
ON/OFF
SWITCH
XLR-TO-TRS MIC CONNECTOR (10FT)MICROPHONE CLIP PROTECTIVE POUCH
Type: Dynamic Wired Microphone
Material: Metal
Color: Black
Noise-free On/Off Switch
Directivity: Unidirectional
Frequency Response: 50Hz - 15,000Hz
Specifications
• Insert the Female XLR connector to the microphone
by aligning the 3 pins of the microphone to the
3 holes of the XLR. Push in until you hear a click.
• To disconnect the XLR
connector from the
microphone, simply press
down the TAB of the
connector and pull away
from the microphone.
Turn off microphones that are not in use.
Don’t boost tone controls indiscriminately.
Try to keep microphones and loudspeakers far away from each other.
Move the loudspeaker closer to the listener.
Lower the speaker output.
Use in-ear monitoring systems in place of floor monitors.
TAB
Impedance: 600 ohms
Sensitivity: -73dB
Connector: XLR-to-TRS
Length: 18.41cm (7.25")
Weight of mic: 0.24Kg (0.53 lbs)
Female XLR connector
MC-20 Mic base

Summary of content (1 pages)