How to fix the VT11 keyboard issue? 1. Need a 2GB or 2 GB above U-disk, and the format of USB must be “FAT32”.
. Unzip and copy the following software files to the root directory of U-disk. (AN1-EC-CQ-US-VO.03-Shell.ZIP) (1) Go to our official website: https://awowtech.com/ (2) Search “VT11” and you will find out the instruction and the click it and download.
. (1) Insert the U-disk into any USB port of the laptop. (3) Do not cut off the power supply during the software flashing process, so please confirm the electricity of the laptop must be 50% or above. Or you can connect the power supply at that time. (3) Then please close the laptop and make sure the computer is in “CLOSE” stated. 4. Press the power button to turn on, and when the Indicator light up, pressing “F7” at the same time. The display will pop-up a window interface as the picture shows.
5. Please choose the second option “UEFI” for set up, then click “ENTER” for confirmation. 6. Then you will find out the software is running as the picture showed. Please do not press any button, just wait for it. 7. When you saw “Update EC ROM successfully” on the bottom, then it’s finished. Please keep pressing the power button to turn it on and then turn it off, the keyboard problem will be solve when you turn on again.
8. And you can check out update EC ROM by the following steps: (1) Press the power button to turn on, and when the Indicator light up, keep pressing “Delete” button. (2) Then you can find out the information showed EC Version is “00.03”. Note: If it do not update the EC files successfully, it will be” 00.02”; And please do not edit any information on this page, thanks! (3) After checkout, please click “Esc” button and it will enter the windows interface.
