User Manual AWR-RP9000N Repeater
Thank you! Thank you for purchasing this AWR-RP9000N Repeater by Advanced Wireless Communications (AWC). The AWR-RP9000N delivers the latest technology, has the most stable components, and has the most advanced production technology. The AWRRP9000N fix installed radio will provide you with the reliable performance and high quality you demand. This manual should be read to ensure that the user understands the operation of the AWR-RP9000N. Please read the Safety Instructions before use.
Hazards and Hazardous Environments (continued) • The radio shall not be operated in or around locations that are using blasting devices or detonators. The radio shall be turned in the area where blasting is in progress and in areas with signage stating that blasting is occurring. If transporting such materials, they shall be secured in an approved container to prevent inadvertent detonation from the radio.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device , pursuant to part 15 of the FCC Rules.
WARNING conditions in the area to ensure the minimum separation distance is maintained between the antenna and nearby persons for satisfying RF Exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Use Only, for work-related use, transmit only when person(s) are at least the minimum distance from the properly installed, externally mounted antenna.
CONTENTS Unpacking and device check.....................................................................1 Packing list ..............................................................................................1 Product images ...........................................................................................1 Front panel ..............................................................................................1 Front panel functions............................................................
Unpacking and Device Check Please carefully remove the radio from its packaging and before disposing of the packing materials, ensure that all the items noted below have been included. If any item has been lost or damaged, please submit a claim with the carrier or deliverer. Items Quantity AWR-RP9000N Repeater 1 Adapter 1 ANTENNA KIT 1 Repeater Programming Software Available at www.advancedwireless.com User Manual Available at www.advancedwireless.com Warranty Card Available at www.
Back Panel Antenna AUX interface pin No. Part Name No. Part Name 1 RXD 9 DC-OUT 2 TXD 10 AF-OUT 3 VBAT-BAT 11 SPK1 4 GND 12 SPK2 5 COR 13 DET 6 GND 14 / 7 MIC 15 / 8 PTT Installation Before installing the Repeater , please read the following precautions carefully. Precautions It shall be firmly attached in the mounting location with supplied hardware to ensure Repeater cannot break lose and cause damage or physical injury.
Installation • Power drill w/ appropriate drill size. • Phillips screwdriver. Preparation Steps the Repeater to the desired position. Connecting antenna. Connect the power supply.
LED Indicator The front panel LED indicator allows the user to determine the radio state. Indicator Status Radio Status Power Red LED glows Normal power supply Tx Red LED glows Transmitting USB uploading data Rx Green LED glows Receiving signal USB download data Product Operation Power on Power red LED glows，The device starts running Product Setting 1、The product is set up through Repeater Programming Software. 2、Connect Repeater communication cable.
3、Start Repeater Programming Software. 4、Open the menu Setting/communication Port，ConfigurationPort. 5、Programming /Read data from radio/Start，Read data completed. 6、Set the data. 7、Programming /Read data from radio/Start，Save data to Repeater.
(952) 469-5400 / Toll Free: (800) 475-5852 20809 Kensington Blvd Lakeville, MN 55044-8353 www.AdvancedWireless.
