User Manual

Photography Background Stand

User Manual

Safety Instructions

1. Keep the parts of this product away from fire and heating source.

2. Keep the parts of this product out of reach of children for safety concerns.

3. Ensure that the two stands of the backdrop are of the same height before

putting on the hanging pole.

4. Never put any items other than the backdrop cloth on the hanging pole.

5. Always use the sand bag to further secure the stand.

Package Contents

Carry Bag x 1

Stand x 2

Note:

This user manual is generic for model #01BST003-107-06.V1and #01BST002-108-06.V2.

Please note that the amount of clips and securing clips might vary.

Page 1

Clip

x 4 (01BST003-107-06.V1)

x 8 (01BST002-108-06.V2)

Securing Clip

x 2 (01BST003-107-06.V1)

x 4 (01BST002-108-06.V2)

Sand Bag x 2

PAGE 1
Safety Instructions Photography Background Stand User Manual 1. Keep the parts of this product away from fire and heating source. 2. Keep the parts of this product out of reach of children for safety concerns. 3. Ensure that the two stands of the backdrop are of the same height before putting on the hanging pole. 4. Never put any items other than the backdrop cloth on the hanging pole. 5. Always use the sand bag to further secure the stand.
PAGE 2
Setting up Extension Hanging Pole x 2 1 Left End Hanging Pole x 1 Right End Hanging Pole x 1 Specifications Model Overall Dimensions (L x W x H) Weight Capacity Unfold the two stands as shown above. Remember to fasten the side knobs to secure the stands. 01BST003-107-06.V1 01BST002-108-06.
PAGE 3
Left End Hanging Pole Extension Hanging Pole Right End Hanging Pole OR Left End Hanging Pole Extension Hanging Pole Extension Hanging Pole Right End Hanging Pole Connect the left end hanging pole, extension hanging pole and right end hanging pole together. If necessary, you can add one more extension hanging pole.
PAGE 4
Further secure the stand with sand box (Please fill the sand box with sand first.) 1. Install the whole hanging pole onto the top of the two stands and secure them with the wing nuts. (The wing nuts are preinstalled on the top of the stands. You need to separate them from the stands first.) 2. Hang the backdrop cloth (not included) on the hanging pole and secure them with the four clips and securing clips.