SE-1 RM-ED007 SE-1 CHASSIS SERVICE MANUAL MODEL KDL-26P2520 KDL-32P2520 KDL-26P2530 KDL-32P2530 KDL-40P2530 COMMANDER DEST RM-ED007 AEP RM-ED007 AEP RM-ED007 AEP RM-ED007 AEP RM-ED007 AEP MODEL COMMANDER KDL-26P2520 KDL-32P2520 KDL-26P2530 KDL-32P2530 KDL-40P2530 DEST RM-ED007 UK RM-ED007 UK RM-ED007 UK RM-ED007 UK RM-ED007 UK KDL-26P2520 / KDL-32P2520 KDL-26P2530 / KDL-32P2530 / KDL-40P2530 RM-ED007 FLAT PANEL COLOR TV -1-
SE-1 RM-ED007 TABLE OF CONTENTS Section Title Page Caution ................................................................ Specifications ...................................................... Connectors .......................................................... Self Diagnosis ..................................................... 3 4 6 7 1. GENERAL ................................................................... 8 2. DISASSEMBLY 2-1. Stand Removal ................................................
SE-1 RM-ED007 CAUTION Lead Free Soldered Boards example 1 The circuit boards used in these models have been processed using Lead Free Solder. The boards are identified by the LF logo located close to the board designation e.g. F1, H1 etc [ see examples ]. The servicing of these boards requires special precautions to be taken as outlined below. example 2 It is strongly recommended to use Lead Free Solder material in order to guarantee optimal quality of new solder joints.
SE-1 RM-ED007 ITEM MODEL Television System Stereo System E B/G/H, D/K, I, L,DVB-T GERMAN/NICAM Stereo U I, DVB-T NICAM Stereo Projected Picture Size Channel Coverage VHF : E02-E12 UHF : E21-E69 CATV : S01-S20 HYPER : S21-S41 D/K : R1-R12, R21-R69 L : F2-F10, B-Q, F21-F69 I : UHF B21-B69 Input/Output Terminals [REAR] Sound Output Right and Left speaker Sub-woofer 2 x 10W (RMS) General Specifications Power Requirements AV1: 21-pin Euro connector (CENELEC standard) PAL, SECAM NTSC 3.58/4.
SE-1 RM-ED007 Model Name Item (AEP) (UK) PAP OFF OFF PAT OFF OFF RGB Priority ON ON Sub Woofer OFF OFF Scart 1 ON ON Scart 2 ON ON Front in (4) ON ON Projector OFF OFF Norm B/G ON OFF Norm I ON ON Norm D/K ON OFF Norm AUS OFF OFF Norm L ON OFF Norm SAT OFF OFF Norm M OFF OFF Teletext ON ON Nicam Stereo ON ON WARNING (UK Models only) The flexible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 10 AMP rating.
SE-1 RM-ED007 21 pin connector Pin No 1 2 Signal 1 21 Signal level Audio output B (right) Standard level : 0.5V rms Output impedence : Less than 1kohm* 2 Audio input B (right) Standard level : 0.5V rms Output impedence : More than 10kohm* 3 Audio output A (left) Standard level : 0.5V rms Output impedence : Less than 1kohm* 4 Ground (audio) 5 Ground (blue) 20 6 Audio input A (left) 18 7 Blue input 0.7 +/- 3dB, 75 ohms positive Function select (AV control) High state (9.
SE-1 RM-ED007 SE-1 SELF DIAGNOSTIC SOFTWARE The identification of errors within the SE-1 chassis is triggered in one of two ways :- 1: Busy or 2: Device failure to respond to IIC. In the event of one of these situations arising the software will first try to release the bus if busy (Failure to do so will report with a continuous flashing LED) and then communicate with each device in turn to establish if a device is faulty.
The operating instructions mentioned here are partial abstracts from the Operating Instruction Manual. The page numbers of the Operating Instruction Manual remain as in the manual.
3 Press F/f to select the language displayed on the menu screens, then press . After selecting the language and country/region, a message confirming the TV start auto-tuning appears on the screen. The TV will now search for and store all available TV channels. Auto Start Up Language Country Select: 4 6: Auto-tuning the TV Overview of the TV buttons and indicators Watching TV Watching TV 1 Confirm: Press F/f to select the country/region in which you will operate the TV, then press .
Checking the Digital Electronic Programme Guide (EPG) 1 2 In digital mode, press to display the Digital Electronic Programme Guide (EPG). Using MENU Functions Navigating through menus “MENU” allows you to enjoy various convenient features of this TV. You can easily select channels or external inputs with the remote. Also, settings for your TV can be changed easily using “MENU”. 1 Press MENU to display the menu. Perform the desired operation, as shown in the following table.
Picture Adjustment menu Picture Adjustment Picture Mode Backlight Contrast Brightness Colour Hue Sharpness Colour Tone Reset Noise Reduction Sound Adjustment menu You can select the options listed below on the Picture menu. To select options in “Settings”, see “Navigating through menus” (page 16).
Timer Features menu Standard On Adv. Contrast Enhancer AV2 Output TV 0 RGB Center PC Adjustment Timer Back: • Sleep Timer Sets a period of time after which the TV automatically switches itself into standby mode. When the Sleep Timer is activated, the (Timer) indicator on the TV (front) lights up in orange. You can select the options listed below on the Features menu. To select options in “Settings”, see “Navigating through menus” (page 16).
Using Optional Equipment Digital Set-up menu You can change/set the digital settings using the Digital Set-up menu. To select options in “Settings”, see “Navigating through menus” (page 16). Set Up Auto Start Up Language Country Auto Tuning Programme Sorting AV Preset Sound Offset Manual Programme Preset English - Connecting optional equipment You can connect a wide range of optional equipment to your TV. Connecting cables are not supplied.
Specifications Connecting to the TV (rear) PC DVD player Digital satellite receiver To connect Do this Display Unit PC D Connect to the PC / sockets. It is recommended to use a PC cable with ferrites.
PC Input Signal Reference Chart Problem Cause/Remedy Signals Picture noise when viewing a TV channel • Select “Manual Programme Preset” in the “Set-Up” menu and adjust “AFT” (Automatic Fine Tuning) to obtain better picture reception (page 21). Some tiny black points and/or bright points on the screen • The picture of a display unit is composed of pixels. Tiny black points and/or bright points (pixels) on the screen do not indicate a malfunction.
SE-1 RM-ED007 SECTION 2 DISASSEMBLY 2-1. STAND REMOVAL 2-2.
SE-1 RM-ED007 2-3. SPEAKER REMOVAL Two screws 1 Two screws 2 2-4.
SE-1 RM-ED007 2-5. BDTR-2 BOARD REMOVAL Two screws BDTR-2 Board 2-6.
SE-1 RM-ED007 2-7. H1/H1P BOARD REMOVAL H1/H1P Board Two screws 2-8.
SE-1 RM-ED007 2-9. H3/H3P BOARD REMOVAL Two screws H3/H3P Board 2-10.
SE-1 RM-ED007 SECTION 3 CIRCUIT ADJUSTMENTS 3-1. Electrical Adjustments Service adjustments to this model can be performed using the supplied remote Commander RM-ED007. How to enter into the Service Mode 1. 2. Turn on the main power switch. Press the following sequence of buttons on the Remote Commander.
SE-1 RM-ED007 ERROR MENU SOUND M-N M-D M-S S-M D-M N-M Effect Mode BBE Mode BBE Vol main BBE Vol res B1 B2 B3 B4 B5 Loudness MB_STR MB_LIM MB_HMC MB_LP MB_HP SUBW_FREQ NICAM C AD NICAM Error Stereo Status 192 -20 +20 +10 -10 496 +1 +0 +3 +0 +4 +0 -12 -12 +6 +23 +0 +0 +0 +5 +3 +5 (0, 511) (-128, -1) (+0, +127) (+0, +127) (-128, -1) (0, 1023) (+0, +2) (-0, +127) (+0, +255) (+0, +7) (-96, +96) (-96, +96) (-96, +96) (-96, +96) (-96, +96) (+0, +68) (+0, -127) (-32, +0) (+0, +127) (+5, +30) (+3, +30) (+5, +40
SE-1 RM-ED007 3-2. TEST MODE 2 Test Mode 2 is available by setting the TV for operation in Service Mode [ As shown on Page 21 ] , OSD ‘TT’ appears. The functions described below are available by selecting the two numbers. To release the ‘Test mode 2’, press 00, 10, 20 ... twice or switch the TV set into Stand-by mode. In ‘TT Menu’ mode, it is possible to remove the Menu from the screen by pressing the Speaker Off button once. Pressing the Speaker OFF button a second time will cause the Menu to reappear.
SE-1 RM-ED007 3-3. TT OSD Labels (1) 3 2 A E P (4) E C S (5) C B A (7) D D C (8) E (2) C L K (10) T W C V (17) (19) (18) T T - (6) N o - r m O H D C M S S (9) (16) (3) (11) (12) (13) (14) (15) (20) Key: 1. Model configuration. a. To set 26” AUO (TT68). b. To set 26” Samsung (TT72). c. To set 32” AUO (TT69). d. To set 32” Samsung (TT73). e. To set 20” Chi-Mei (TT71). f. To set 40” Samsung (TT74). 2. Model destination. 3. Command prompt. 4. ECS enabled/disabled (TT31). 5.
4-1.
4-1.
4-1.
4-1. BLOCK DIAGRAMS (4) (KDL-26/32P2520/30 ONLY) + D6000 BRIDGE RECTIFIER IC6000 SWITCHING CONTROL _ V SENSE 1 C1 TIMER SS 9 2 2 13 12 Q6004 2 POWER SWITCHING (MOS FETS) PS6002 D6011 DIODE 3.
4-1. BLOCK DIAGRAMS (5) 4-2. BOARD LOCATION 5-2.
A B C D E F H G I J K L M N O 1 A1.-SE-1(KDL-26/32P2520/30) / A1P.-SE-1(KDL-40P2530) 2 AUDIO SCART1 AUDIO SCART2 SC1-OUT-R R2022 330 1/10W R2034 220 1/10W C2025 0.022 25V R2063 470k 1/10W C2048 47 16V SC2-OUT-R D2037 UDZSTE-179.1B R2092 330 1/10W C2065 0.022 25V R2097 0 R2101 470k 1/10W C2071 47 16V D2061 UDZSTE-179.1B R2093 1k 1/10W C2066 1000p 50V R2098 0 R2102 470k 1/10W C2069 1 10V D2062 UDZSTE-179.1B R2094 330 1/10W C2067 0.
A B C D E F H G I J K L M N O A1.-SE-1(KDL-26/32P2520/30) / A1P.-SE-1(KDL-40P2530) 1 A1/A1P 2/ 3 AUDIO SWITCH (PC,Component,Scart2,DVI) AUDIO SCART2 D1100 UDZSTE-175.6B L1100 4.7uH 14 Y1 X0 12 INH X3 11 PC_L IF OUT DIGI TAL IF 1 TU1100 XX R1305 0 R1306 0 R2018 10k 1/10W R2008 4.7k 1/10W TU1300 FSS, BTP-HC401 ET6501 +5VA R2019 10k 1/10W R2009 4.
A B C D E F H G I J K L M N O 1 A1.-SE-1(KDL-26/32P2520/30) / A1P.-SE-1(KDL-40P2530) +8.5V 1 8.
A B C D E F G H I J K L M 1 2 ~ A1/A1P Printed Wiring Board Conductor Side B ~ ~ A1/A1P Printed Wiring Board Conductor Side A ~ 3 4 5 6 7 8 ~ A1/A1P Board Semiconductor Voltage Table ~ 9 Ref (e)(s) (b)(g) (c)(d) Q2000 0 0.4 Q2001 0 0.7 ~ A1/A1P Board IC Voltage Table ~ Ref No Pin No Volts (V) 8.4 1 3.7 0 2 3.2 Ref No Pin No Volts (V) 13-15 16 Ref No Pin No Volts (V) 3.6 8 4.2 5.0 9 8.5 IC1000 IC1000 10 11 - 33 - 3-4 2.3 5-8 0 9-12 3.
9 10 JR5602 0 CHIP JR5601 0 CHIP +2V5D_DDR JR5600 FB5631 0 XX CHIP +2V5D C5639 XX C5640 XX C5641 1 6.3V C5702 4.7 10V C5642 1 6.3V C5703 100 16V C5697 1 FB5636 0uH 3.
A B C D E F H G I J K L M N O BDTR-2.-SE-1(KDL-26/32P2520/KDL-26/32/40P2530) 3.3V_MAIN FB5680 0uH 1 C5682 1 10V C5680 0.1 10V C5683 0.1 10V 3.3V_MAIN NAND FLASH NC NC 48 2 NC NC 47 3 NC NC 46 4 NC NC 45 5 NC IO/8 44 6 NC IO/7 43 7 RB IO/6 42 IO/5 41 2 1 R5691 1k R5686 470 C5684 0.1 10V BDTR-2 2/10 IC5680 K9F2808U0C-PCB0T 16 BIT NAND FLASH/MEMORY PLACE THESE CAPACITORS CLOSE TO IC PINS.
BDTR-2 IOIS16B 11 - 36 - 2 3 4 5 6 7 8 9 10 ADD[8:14] R5760 100 C5760 0.
A C D E F H G J K L M N O 8.5V_MAIN FB5780 0uH R5791 0 CHIP 2 3 VIDEO AMPS/BUFFERS CONTROLVIN GND NOISE VOUT 4 C5783 0.01 16V 5 C5781 0.1 C5780 0.1 10V C5792 0.1 25V IC5781 TAR5S50(TE85R) 1 2 I BDTR-2.-SE-1(KDL-26/32P2520/KDL-26/32/40P2530) 5V_MAIN 1 B C5806 0.1 25V C5793 4.7 10V C5791 0.01 16V C5796 0.1 10V FB5781 0uH C5794 0.1 10V C5799 4.
A B C D E F H G I J K L M N O 1 BDTR-2.-SE-1(KDL-26/32P2520/KDL-26/32/40P2530) KEY RESET SIGNAL GENERATION C3089 100p 50V 3.3V_MAIN 3.3V_MAIN R5861 10k D5840 XX nSMC_INT 5V_STBY C3086 22 6.3V CTS0B C5842 XX R5862 10k R5851 XX S FTV_CONFIG3 R3216 0 CHIP C3077 XX nMASTER_RESET 3.3V_MAIN C5844 100p 50V CH 3.
A B C D E F H G I J K L M N O 1 BDTR-2.-SE-1(KDL-26/32P2520/KDL-26/32/40P2530) 3.3V_MAIN 3.3V_MAIN GND 1 JTCK 2 JTDO 3 JTMS 4 JTRST JTDI 3 XX R5894 10k 10k 10k 10k R5892 CN5883 10P BLK FIT FOR JTAG GND 1 PMSBS 2 JTCK +3V3D 3 JTDO PMSDIO 4 JTMS PMSINS 5 JTDI NMI_EDINT +3V3D 8 R5893 10k 9 nEMMA_RST 10 GND 11 NMI 12 PMSBS R5902 100 PMSDIO R5903 100 PMSINS 6 R5904 100 7 6 7 R5906 4.
A B C D E F H G I J K L M N O 5V_LCD BDTR-2.-SE-1(KDL-26/32P2520/KDL-26/32/40P2530) DCC MODE VCC VCC R3155 XX R3149 XX 30 DCC LUT VCC R3141XX R3137 29 NC GND NC GND DCC GND R3125 XX R3127 0 C3068 1000p 50V C3069 0.01 25V R3153 R3158 0 0 R3143 0 CHIP 1 1 2 2 1 1 2 2 RED_SCART1 +3.3IO TXD RXD HP_DET EDID_WP +3.3IO 5V_STBY R3159 470 1/10W 3 GREEN_SCART2 GREEN_SCART2 R3197 XX 77 GND3.3COM 76 186 GNDA VSUP3.3DRI 75 187 V IN 6 GND3.
A B 1 C D E F H G I J K L M N O BDTR-2.-SE-1(KDL-26/32P2520/KDL-26/32/40P2530) 6 L 7 2 GND TO G2 BOARD CN6005 (KDL-40P2530) R PS6501 3.15A C6500 0.01 25V Q6504 UN2211 LINE_L 8 9 GND 10 +33V 11 GND 12 AMP_MUTE 13 D6501 M1FM3 LINE_R Q6506 MSD601-RT1 C6512 0.01 50V C6528 0.22 16V IC6502 TK11185CSCL-G C6519 0.01 50V UNREG_33V C6501 0.01 50V R6512 0 3.3V_STBY 5 GND 4 4 GND C6526 0.
A B C D E F H G I J K L M N O 1 BDTR-2.-SE-1(KDL-26/32P2520/KDL-26/32/40P2530) CXD1968R (COFDM DEMODULATOR BLOCK) 2 3.3V_MAIN R6576 XX D6522 XX 1.8V_MAIN R6577 0 3.3V_MAIN 1.2V_MAIN R6579 XX 3V3D_XTAL_CO C5055 10 16V L5042 10uH C5056 10 16V L5043 10uH C5057 10 16V C5071 10 16V L5044 10uH C5072 10 16V L5045 10uH C5073 10 16V R6578 C6580 XX 0 1 3 R6580 1M 1/10W 1V2D_PAD_CO L5046 10uH IC6504 XX IC6505 MM3141CNRE 2 4 1.2V_MAIN C6582 0.
A B C D E F H G I J K L M N O +3.3IO BDTR-2.-SE-1(KDL-26/32P2520/KDL-26/32/40P2530) +3.3IO 1 R6561 10k 1/10W R6563 22k 1/10W VH_DDH_3.3 D4207 MMDL914T1 D4200 XX S CEC_IN R6565 10k 1/10W R6571 10k 1/10W R6566 150k 1/10W Q4216 UN2211 Q4217 XX JL4229 HOT_PLUG1 Q4214 2SK2036(TE85L) IC4201 IP4776CZ38 HDMI INTERFACE PROTECTION 20 2 R4204 10k 1/10W R4202 1k 1/10W S S R6564 XX BDTR-2 L4208 2.2uH Q4219 2SK2036(TE85L) Q4215 2SK2036(TE85L) R4211 4.7k 1/10W R4210 4.
A B C D E F H G I J K L M N 1 ~ BDTR-2 Printed Wiring Board Conductor Side A ~ 2 3 4 5 6 7 8 9 ~ BDTR-2 Board IC Voltage Table ~ Ref No 10 Pin No Volts (V) 1 3.3 2 1.6 3 3.2 4 0 Ref No IC3001 Pin No Volts (V) 5 3.3 Ref No Pin No Volts (V) 6-8 0 Pin No Volts (V) 13 0.3 Ref No Pin No Volts (V) 1 0 Ref No Pin No Volts (V) 5 2.8 Ref No Pin No Volts (V) Ref No Pin No Volts (V) 10 2.8 IC3008 16 5.0 1 1.4 5 1.7 IC5682 2 0 6-7 3.
A B C D E F G H 1 2 ~ BDTR-2 Printed Wiring Board Conductor Side B ~ 3 4 5 6 7 8 9 10 11 - 45 - I J K L M N O
A B C D E F H G I J K L M N O G1.-SE1(KDL-26/32P2520/30) CN6002 9P T6000 14 1 D6011 FCH08U10 G1 SS VG(L) VC1 P-GND 11 OCP VC2 10 D6003 XX D6002 XX VB TIMER 12 CM6005 R6006 XX GND 14 4 R6004 XX C6011 47 25V C6010 1000p 50V R6008 XX R6007 XX CM6006 C6014 4.7 50V D6001 XX R6005 XX 15 R6003 XX VS D6007 MM3Z15VT1 Q6003 2SK3469 R6030 10 1/4W FPRD D6021 XX C6022 220p 1kV SL 9 7 8 D6015 10ERB20-TB3 R6051 C6028 0.
A B C D E F H G I J K L M N 1 2 NC R IN NC SVR S_GND STBY MUTE PW_GND R OUT VCC L OUT PW_GND 2/2 NC G1 NC 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 4 L_HP AV-GND AV_GN D R_HP 3 2 1 G1.-SE1(KDL-26/32P2520/30) L IN 3 4 TO H2/H2P BOARD CN9856 CN6300 4P IC6300 TDA7495S STEREO POWER AMPLIFIER AUD_GND R6309 1k 1/10W C6305 XX 5 AUD_GND C6302 220p 50V C6300 220p 50V AUDIO_VCC 6 R6301 XX C6301 1 50V R6303 XX C6309 1000 35V C6303 1 50V C6311 0.
A B C D E F H G I J 1 2 ~ G1 Printed Wiring Board Conductor Side A ~ 3 4 5 6 7 8 ~ G1 Board Semiconductor Location Table Side A ~ DIODE 9 D6014 D-5 IC D6000 K-6 D6015 D-7 IC6000 I-3 D6008 I-4 D6018 C-7 IC6001 G-3 IC6201 F-7 IC6300 C-4 TRANSISTOR D6011 E-6 D6202 I-7 IC6002 F-3 Q6003 I-5 D6013 D-7 D6203 H-6 IC6200 I-6 Q6004 H-5 10 11 - 48 - K L M N O
A B C D E F H G I J K L M 1 2 ~ G1 Printed Wiring Board Conductor Side B ~ 3 4 5 6 7 8 ~ G1 Board Semiconductor Location Table Side B ~ DIODE 9 D6007 G-4 D6012 L-5 D6018 M-7 D6203 H-6 IC6001 I-3 TRANSISTOR Q6005 N-7 D6000 E-6 D6008 G-4 D6013 L-7 D6019 M-6 D6300 N-4 IC6002 J-3 Q6000 F-3 Q6006 M-7 D6004 F-3 D6009 H-5 D6014 K-5 D6200 F-6 D6302 M-5 IC6200 G-7 Q6001 I-3 Q6007 M-7 D6005 H-3 D6010 G-4 D6015 L-7 D6201 F-6 IC6201 J-7 Q600
A B C D E F H G I J K L M N O G2.-SE-1(KDL-40P2530) D6003(1) Mount Mecha A6001 Q6001(1),Q6002(2),D6012(1) D6003 263406601 Mount Mecha A6012 L6003 175uH 214976661 R6126 C6068 0.47 4.
A B C D E F H G I J K L M N 1 2 NC R IN NC SVR S_GND STBY MUTE PW_GND R OU T VCC L OUT PW_GND 2/2 NC G2 NC 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 L_HP AV-GND AV_GN D R_HP 3 2 1 G2.-SE1(KDL-40P2530) L IN 3 4 TO H2/H2P BOARD CN9856 CN6300 4P IC6300 TDA7495S STEREO POWER AMPLIFIER 4 AUD_GND R6309 1k 1/10W C6305 XX AUDIO_VCC AUD_GND 5 C6302 220p 50V C6300 220p 50V AUDIO_VCC R6303 XX C6303 1 50V L_IN R6305 XX C6311 0.
A B C D E F G H ~ G2 Printed Wiring Board Conductor Side A ~ I J K L M N O ~ G2 Board Semiconductor Location Table Side A ~ 1 DIODE D6003 2 3 4 5 6 7 8 9 10 11 - 52 - B-8 D6004 H-8 D6012 D-4 D6206 I-8 D6207 I-9 IC IC6001 F-5 D6028 H-4 IC6002 E-2 D6036 M-2 IC6003 G-3 D6037 K-2 IC6004 H-2 D6038 L-3 IC6200 I-7 D6039 K-3 IC6201 K-8 D6040 K-7 IC6300 K-8 D6043 K-6 D6044 K-6 Q6001 B-4 D6200 H-7 Q6002 C-4 TRANSISTOR D6203 H-8 Q6013 F-3 D
A B C D E F G H ~ G2 Printed WiringBoard Conductor Side B ~ I J K L M N O ~ G2 Board Semiconductor Location Table Side B ~ 1 DIODE 2 3 4 5 6 7 8 9 10 11 - 53 - D6200 F-7 D6000 L-8 D6203 F-8 D6001 M-1 D6204 F-8 D6002 L-8 D6206 E-8 D6005 G-9 D6207 F - 10 D6006 K-2 D6300 B-9 D6007 K-2 D6302 D6008 G-9 D6011 M-3 IC6000 L-1 D6013 L-2 IC6001 H-5 D6014 L-3 IC6002 H-2 D6015 F - 10 IC6003 F-3 D6017 M-3 IC6004 G-2 D6018 L-3 IC6200 E-7 D601
A B C D E F H G I J K L M N O 1 ~ H1/H1P Board Schematic Diagram [ Switch Panel ] ~ H1.-SE-1(KDL-26/32P2520/30) / H1P.-SE-1(KDL-40P2530) H1/H1P 2 SWITCH PANEL R9001 R9003 1k 1.5k 1/10W 1/10W R9005 2.2k 1/10W VD9001 D9000 RD5.6SB-T1 ~ H2/H2P Board Schematic Diagram [ YC, AV, Headphones ] ~ VD9006 VD9004 VD9002 C9000 0.1 16V R9007 0 CHIP H2.-SE-1(KDL-26/32P2520/30) / H2P.
A B C D E F G H I J K L 1 ~ H1/H1P Printed Wiring Board Conductor Side A ~ ~ H1/H1P Printed Wiring Board Conductor Side B ~ ~ H2/H2P Printed Wiring Board Conductor Side A ~ ~ H2/H2P Printed Wiring Board Conductor Side B ~ ~ H3/H3P Printed Wiring Board Conductor Side A ~ ~ H3/H3P Printed Wiring Board Conductor Side B ~ 2 3 4 5 6 7 8 9 10 11 - 55 - M N O
4-4.
PST3629UL TC7SH00FU (T5RSOYJF) RPM7140-H8 TDA7495S RV5C387A-E2-FB TDA9886TS/V4,118 STR-A6169 TL1431CZ-AP TDA9974AHS/8/C112 UPD61123F1-100-KA3-A TC74LCX541FT(EKJ) TAR5S50(TE85R) TC7S66FU TK11185CSCL-G - 57 -
SECTION 5 EXPLODED VIEWS NOTE : Items with no part number and no description are not stocked because they are seldom required for routine service. The construction parts of an assembled part are indicated with a collation number in the remarks column. Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. 5-1.
5-1. CHASSIS Cont. 21 20 23 17 22 18 19 REF.NO. 17 18 19 20 21 22 23 PART.NO DESCRIPTION REMARK 1-802-268-11 LCD PANEL (26 WXGA TFT) (26P2520/30UK/AEP) 1-802-237-21 LCD PANEL (32 WXGA TFT) (32P2520/30UK/AEP) 1-802-386-21 LCD PANEL (40 WXGA TFT) (40P2530UK/AEP) *A-1247-113-A H3 BOARD, COMPLETE (26/32P2520/30UK/AEP) *A-1247-117-A H3P BOARD, COMPLETE (40P2530UK/AEP) 2-674-189-02 GUIDE, LIGHT NOT SERVICEABLE PART NOT SERVICEABLE PART NOT SERVICEABLE PART NOT SERVICEABLE PART REF.NO. - 59 - PART.
5-2. STAND, REAR COVER, POWER LEADS 61 62 63 54 64 65 68 56 59 55 55 57 55 58 56 UK models only 60 54 52 53 51 67 66 REF.NO. 51 52 53 54 55 56 57 PART.
SECTION 6 ELECTRICAL PARTS LIST PARTS LISTING TABLE OF CONTENTS Page A1/A1P BOARD COMPLETE Parts List : .................................................................................................... 62 H2/H2P BOARD COMPLETE Parts List : .................................................................................................... 65 H3/H3P BOARD COMPLETE Parts List : ....................................................................................................
A1/A1P REF.NO. PART.NO DESCRIPTION REMARK *A-1247-112-A A1 Board Complete (KDL-26/32P2520/KDL-26/32P2530) *A-1247-116-A A1P Board Complete (KDL-40P2530) *2-586-040-02 *2-586-041-01 SHIELD CASE, IFOB (MAIN) SHIELD CASE, IFOB (TOP) < CAPACITOR > C1000 C1001 C1100 C1102 C1103 1-126-947-11 1-164-156-11 1-162-927-11 1-162-925-11 1-162-925-11 ELECT 47UF 20.00% 35V CERAMIC CHIP 0.1UF 25V CERAMIC CHIP 100PF 5.00% 50V CERAMIC CHIP 68PF 5.
A1/A1P REF.NO. D2041 D2042 D2043 D2044 D2045 PART.NO 8-719-069-60 8-719-069-60 8-719-069-60 8-719-069-60 8-719-083-63 DESCRIPTION DIODE UDZSTE-179.1B DIODE UDZSTE-179.1B DIODE UDZSTE-179.1B DIODE UDZSTE-179.1B DIODE UDZSTE-1713B D2046 D2047 D2048 D2049 D2050 8-719-069-60 8-719-069-60 8-719-069-60 8-719-069-55 8-719-069-60 DIODE DIODE DIODE DIODE DIODE UDZSTE-179.1B UDZSTE-179.1B UDZSTE-179.1B UDZSTE-175.6B UDZSTE-179.
A1/A1P REF.NO. R1220 R1221 R1222 R1223 R1224 PART.NO 1-216-809-11 1-216-845-11 1-216-813-11 1-216-824-11 1-216-809-11 DESCRIPTION REMARK METAL CHIP 100 5% 1/10W METAL CHIP 100K 5% 1/10W METAL CHIP 220 5% 1/10W METAL CHIP 1.8K 5% 1/10W METAL CHIP 100 5% 1/10W REF.NO. R2025 R2026 R2028 R2029 R2030 PART.
A1/A1P H2/H2P REF.NO. R2076 R2077 R2078 R2079 R2080 PART.NO 1-216-853-11 1-216-853-11 1-216-864-11 1-216-864-11 1-216-864-11 DESCRIPTION REMARK METAL CHIP 470K 5% 1/10W METAL CHIP 470K 5% 1/10W SHORT CHIP 0 SHORT CHIP 0 SHORT CHIP 0 REF.NO. R2127 R2129 R2132 R2134 R2135 PART.
H2/H2P H3/H3P G2 REF.NO. CN9857 PART.NO *1-764-250-11 DESCRIPTION REMARK PIN, CONNECTOR (PC BOARD) 4P 8-719-977-28 8-719-977-28 8-719-069-60 8-719-069-60 DIODE DIODE DIODE DIODE DTZ10B DTZ10B UDZSTE-179.1B UDZSTE-179.
G2 REF.NO. C6042 C6043 C6044 C6045 C6046 PART.NO 1-115-339-11 1-162-970-11 1-107-905-11 1-107-910-11 1-162-970-11 DESCRIPTION REMARK CERAMIC CHIP 0.1UF 10.00% 50V CERAMIC CHIP 0.01UF 10.00% 25V ELECT 4.7UF 20% 50V ELECT 100UF 20% 50V CERAMIC CHIP 0.01UF 10.00% 25V C6047 C6049 C6051 C6052 C6053 1-100-831-91 1-107-906-11 1-107-826-11 1-163-021-91 1-162-964-11 CERAMIC CHIP 0.
G2 REF.NO. D6300 D6302 PART.NO 8-719-069-55 8-719-069-55 DESCRIPTION DIODE UDZSTE-175.6B DIODE UDZSTE-175.6B REMARK < TERMINAL BOARD > ET6000 ET6002 ET6003 1-537-770-21 1-537-770-21 1-537-770-21 TERMINAL BOARD, GROUND TERMINAL BOARD, GROUND TERMINAL BOARD, GROUND < FUSE > F6000 £ 1-576-233-51 FH6002 £ 1-533-725-11 FUSE 6.3A 250V FUSE HOLDER < FERRITE BEAD > FB6001 FB6002 1-410-396-41 1-410-396-41 FERRITE 0.45UH FERRITE 0.45UH REF.NO.
G2 REF.NO. R6046 R6047 R6048 R6050 R6051 PART.NO 1-249-405-11 1-249-389-11 1-216-813-11 1-216-813-11 1-208-814-91 DESCRIPTION REMARK CARBON 100 5% 1/4W CARBON 4.7 5% 1/4W METAL CHIP 220 5% 1/10W METAL CHIP 220 5% 1/10W METAL CHIP 22K 0.5% 1/10W REF.NO. R6100 R6101 R6102 R6103 R6104 PART.
Note : The components identified by mark contain confidential information. Strictly follow the instructions when ever the components are repaired and/or replaced REF.NO. R6318 PART.NO 1-216-833-11 DESCRIPTION REMARK METAL CHIP 10K 5% 1/10W < RELAY > RY6000 £ 1-755-579-11 RELAY, POWER < TRANSFORMER > T6002 £ 1-443-983-11 T6003 £ 1-443-986-11 T6200 £ 1-443-313-21 CONVERTER TRANSFORMER (PIT) CONVERTER TRANSFORMER (PIT) TRANSFORMER, CONVERTER (SBT) REF.NO.
BDTR-2 REF.NO. C3044 C3045 C3048 C3049 C3050 PART.NO 1-127-715-91 1-107-826-11 1-162-966-11 1-162-966-11 1-107-826-11 DESCRIPTION CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP REF.NO. PART.NO C3350 C3353 C3354 C3355 C3410 1-162-928-11 1-162-968-11 1-163-037-11 1-127-573-11 1-162-970-11 CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CHIP CHIP CHIP CHIP CHIP 120PF 5.00% 50V 0.0047UF 10.00% 50V 0.022UF 10.00% 50V 1UF 10% 16V 0.01UF 10.
BDTR-2 REF.NO. C4256 C4257 C4258 C4259 C4260 PART.NO 1-162-964-11 1-162-964-11 1-162-964-11 1-162-964-11 1-162-964-11 DESCRIPTION CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP REMARK 0.001UF 10.00% 0.001UF 10.00% 0.001UF 10.00% 0.001UF 10.00% 0.001UF 10.
BDTR-2 REF.NO. C6536 C6538 C6539 C6543 C6545 PART.NO 1-107-826-11 1-100-566-91 1-100-566-91 1-127-573-11 1-107-826-11 DESCRIPTION CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP C6546 C6547 C6548 C6549 C6551 1-107-826-11 1-162-964-11 1-127-573-11 1-127-573-11 1-127-573-11 CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CHIP CHIP CHIP CHIP CHIP 0.1UF 10.00% 16V 0.001UF 10.
BDTR-2 REF.NO. PART.
BDTR-2 REF.NO. IC5785 IC5786 IC6500 IC6501 IC6502 PART.
BDTR-2 REF.NO. Q4215 Q4216 Q4219 Q4220 Q5780 PART.NO 8-729-028-28 8-729-421-22 8-729-028-28 8-729-028-28 8-729-010-05 DESCRIPTION TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR REMARK 2SK2036(TE85L) UN2211 2SK2036(TE85L) 2SK2036(TE85L) MSB709-RT1 REF.NO.
BDTR-2 REF.NO. R3094 R3095 R3096 R3097 R3098 PART.NO 1-216-864-11 1-216-864-11 1-216-833-11 1-218-823-11 1-216-864-11 DESCRIPTION REMARK SHORT CHIP 0 SHORT CHIP 0 METAL CHIP 10K 5% 1/10W METAL CHIP 100 0.5% 1/10W SHORT CHIP 0 REF.NO. R3180 R3181 R3182 R3183 R3184 PART.
BDTR-2 REF.NO. R3263 R3264 R3265 R3266 R3267 PART.NO 1-216-825-11 1-216-825-11 1-218-957-11 1-216-817-11 1-216-825-11 DESCRIPTION REMARK METAL CHIP 2.2K 5% 1/10W METAL CHIP 2.2K 5% 1/10W RES-CHIP 2.2K 5% 1/16W METAL CHIP 470 5% 1/10W METAL CHIP 2.2K 5% 1/10W REF.NO. R3356 R3370 R3371 R3372 R3373 PART.
BDTR-2 REF.NO. R4208 R4209 R4210 R4211 R4212 PART.NO 1-216-864-11 1-216-809-11 1-216-829-11 1-216-829-11 1-216-833-11 DESCRIPTION REMARK SHORT CHIP 0 METAL CHIP 100 5% 1/10W METAL CHIP 4.7K 5% 1/10W METAL CHIP 4.7K 5% 1/10W METAL CHIP 10K 5% 1/10W REF.NO. R5063 R5064 R5630 R5631 R5632 PART.
BDTR-2 REF.NO. R5744 R5745 R5750 R5751 R5752 PART.NO 1-218-949-11 1-218-949-11 1-218-965-11 1-218-965-11 1-218-965-11 DESCRIPTION REMARK RES-CHIP 470 5% 1/16W RES-CHIP 470 5% 1/16W RES-CHIP 10K 5% 1/16W RES-CHIP 10K 5% 1/16W RES-CHIP 10K 5% 1/16W REF.NO. R5887 R5888 R5889 R5890 R5891 PART.NO 1-218-961-11 1-218-965-11 1-218-961-11 1-218-965-11 1-218-961-11 DESCRIPTION REMARK RES-CHIP 4.
BDTR-2 G1 REF.NO. R6551 R6552 R6554 R6555 R6556 PART.NO 1-216-833-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 DESCRIPTION REMARK METAL CHIP 10K 5% 1/10W SHORT CHIP 0 SHORT CHIP 0 SHORT CHIP 0 SHORT CHIP 0 REF.NO. RB4212 RB4214 RB4215 RB4216 RB4217 PART.
G1 REF.NO. C6009 C6010 C6011 C6012 £ C6013 PART.NO 1-162-970-11 1-162-964-11 1-107-888-11 1-119-892-51 1-100-831-91 DESCRIPTION REMARK CERAMIC CHIP 0.01UF 10.00% 25V CERAMIC CHIP 0.001UF 10.00% 50V ELECT 47UF 20% 25V CERAMIC 470PF 10.00% 250V CERAMIC CHIP 0.001UF 2% 50V C6014 C6015 C6016 C6018 C6019 1-107-905-11 1-162-970-11 1-107-906-11 1-162-970-11 1-107-888-11 ELECT 4.7UF 20% 50V CERAMIC CHIP 0.01UF 10.
G1 REF.NO. IC6300 PART.
J3 G1 REF.NO. R6213 R6304 R6306 R6308 R6309 PART.NO 1-216-295-91 1-216-864-11 1-216-864-11 1-216-825-11 1-216-049-11 DESCRIPTION REMARK SHORT CHIP 0 METAL CHIP 120K 5% 1/10W METAL CHIP 120K 5% 1/10W METAL CHIP 2.2K 5% 1/10W RES-CHIP 1K 5% 1/10W R6313 R6314 R6315 R6316 R6317 1-216-864-11 1-216-845-11 1-216-845-11 1-216-837-11 1-216-833-11 SHORT METAL METAL METAL METAL R6318 1-216-833-11 METAL CHIP 10K 5% 1/10W REF.NO.
G1 REF.NO. PART.NO DESCRIPTION REMARK REF.NO. MISCELLANEOUS 1-826-479-11 LOUDSPEAKER (4.2X15CM) (26/32P2520/30UK/AEP) 1-826-478-11 LOUDSPEAKER (4.
Sony Corporation 9-927-542-01 Sony UK Service Promotions Dept. English 07AP7100-1 Printed in U.K. © 2007.