www.avishop.com Tel: 832-831-6180 Support: customerservice@avishop.
Operating Instruction Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. SURGE PROTECTION DEVICE RECOMMENDED This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc.
Operating Instruction Table of Contents 1. Features.....................................................................................4 2. Package Contents.....................................................................4 3. Specifications............................................................................4 4. Panel Descriptions....................................................................5 5. Connecting and Operating.......................................................7 6.
Operating Instruction Dear Customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. 1. Features HDMI 2.0 version (Support 4K@60Hz YUV4:4:4) Support 3D Bandwidth upto 18Gbps HDCP2.2 input ,HDCP2.2 output HDCP1.4 input, HDCP1.
Operating Instruction 4. Panel Descriptions ① IR receive window. ② Input button IN1~8: choose the desired input port from ports 1~8. ③ Output button OUT1~8: choose the desired output port from ports 1~8. ① IP control. ② RS232 for control. ③ For IR external receiver cable. ④ SPDIF Audio output. ⑤ DC power input. ⑥ HDMI input port. ⑦ HDMI output port.
Operating Instruction Check the EDID Information by Panel button Press “In4”for 3 seconds ,then press “In1”or “Out1” to check the EDID information for each HDMI input. Press “In5” for 3 seconds, then press “In1” or “Out1” to check the device name , IP address and DHCP status.
Operating Instruction 5. Connecting and Operating 1. Connect source devices to input ports of the matrix 2. Connect HDMI output ports to TV or other HDMI sink devices. 3. Optional: connect RS232 cable from PC RS232 port. 4. Optional: connect an Ethernet cable from the TCP/IP port on the matrix to a local area network. 5. Connect 12V POWER supply to DC power socket. 6. Power on the matrix, HDMI sources and displays. 6.
Operating Instruction 7. Remote Control Description 1 Standby Mode. ② OUTPUT-X select INPUT-Y: Press OUTPUT-X (X means 1 to 8 of outputs) Press INPUT-Y (Y means 1 to 8 of inputs) ③ All outputs select INPUT-Y: Press ALL button in zone OUTPUT Press INPUT-Y button (Y means 1 to 8 of inputs), then INPUT-Y switched to ALL OUTPUTS. ④ Cancel Button: Cancel the switching operation ⑤ PTP button: Mirror all inputs and outputs (Ex. Input 1 to output 1, input 2 to output 2, etc): Press PTP button in Zone OUTPUT.
Operating Instruction 9. RS232 Control 9.1 Software control Connect the 8x8 Matrix to PC with a RS232 cable, open the software on your PC. On the COM Setting session, select the COM port according to your PC and click Connect to get connected. On this COM setting session, you can also change the Device name, Device name support up to 16 characters. Save or edit your status by clicking the Edit button.
Operating Instruction The EDID session helps us to Read and Configure EDID for each input, such as HDR, 3D, Data rates and Audio channel. Picture 2 The IP configure session helps to read and configure the IP address and MAC of the Matrix. Check DHCP if you want the router assign an automatic IP for the Matrix.
Operating Instruction The Net Config session allows us to configure the PC and Matrix in the same LAN with the IP Address and connection. Click “Net config” → “Connect” → “Search Device” → “Sel Device Number” →“Connect” then you can see the device name, it meas connect successfully. Picture 4 You can also click “IE”, easy and click to enter into web.
Operating Instruction The last session is System Config, which allows power ON/OFF or reset, default the Matrix. Picture 6 9.2 Command Control 1). Open CommUart Assistant. 2).
Operating Instruction 3). Enter Port Command in Send options. Picture 7 4). Command Command Function Note Mirror all inputs and outputs (Ex. Input 1 to output 1, input 2 to output 2, etc) @W 04 00 01 02 03 ...
Operating Instruction 5). Select HDMI input for HDMI output Command Description 00 Output1 01 Output2 02 Output3 03 Output4 11 Output5 12 Output6 13 Output7 14 Output8 04 All Output 00 Input1 01 Input2 02 Input3 03 Input4 04 Input5 05 Input6 06 Input7 07 Input8 E.g: @W 00 00 #: Output 1 display Input1 Output 1 Input1 6).
Operating Instruction 10. Web Control 1). Connect the HDMI Matrix and PC to the LAN. 2). Open the PC tool (included in the CD). 3). Search the IP address of HDMI Matrix, please refer to picture 4 & picture 5. 4).
Operating Instruction Picture 9: EDID Setting Page Picture 10: IP Configuration Page 16
Operating Instruction MAINTENANCE Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean this unit.
Operating Instruction installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory Service center or other Authorized Servicer, or damage that is attributable to acts of God. 2) THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY COVERAGE".
