Power Tracker VII™ Manual SAID Multi Mode Reader With Memory Manufactured under one or more of the following U.S. Patents: 4,333,072 5,214,409 5,235,326 5,257,011 321,069 5,266,926 318,658 5,465,556 5,484,403 5,499,017 4,262,632 5,559,507 Other Patents Pending, LL.S. and International FCC 1D: 10L-128-AV1004 The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2.
AVID Power Tracker Ill Multi Mode Reader OPERATING MANUAL All rights reserved 1. Introduction The AVID Power Tracker VII Multi Mode Reader is a hand-held identity tag reader with memory and code mapping. it can be used with AVIDITY and ISOBARIC coded radio frequency identification tags. 2. Functional Description ’ Figure 1. Power Tracker Ill 24 POWER Switch The POWER Switch is located on the top right side of the reader and tums the unit ON and OFF. Press the POWER Switch once and the unit will turn ON.
25 MEMORY and TRANSLATION Module 2.54 MODES OF OPERATION The Power Tracker 8 may be used in either of two modes: Data Saver Mode When operating as a data saver, the reader simply logs the tag id number and a timestamp. The output from the serial port is delectable as to whether it includes a timestamp.
Use the arrow keys to set the correct year, then press SELECT. This seems as appropriate a time as any to talk about “Y2K compliance”. The mealtime clock chip used in this product only uses two digits, so it is not Y2K compliant. iris, however, Y2K compatible, in the sense that it will generate the correct date, including leap years, up through 2089. if you're reading this in 2100, 2200, or 2300, you're going to get a leap year that wasn't scheduled, 50 mark March 1 on your calendar.
generally respond to commands from the serial port, unless Study data is being uploaded to the reader. Also, it will not restart downloading if a download is already In progress. 2.53 Communications Any standard communications program that allows you to upload a raw Fascia or text file to the reader may be used. Programs known to work include: Pro Comm, Windows 3.x, Term, Windows 95, Hyper Term. Some adjustment of the settings may be required for optimum performance.
to DB-25 adapter, The AVID Interface/Power cable is 4 feet in length. You may add additional cable to the PC side by using the following connection chart, TABLE 1. RS-232 Serial Cable Pin Assignment Signal DB-9 Pin# AC ADAPT TX RX GND DSR GND (PW) Oo mwn Figure 4, AVID Interface/Power Cable (AVIDITY} WARNING:USE ONLY THE AVID INTERFACE CABLE WITH THE POWER TRACKER Vii. USE ONLY THE AVID AC POWER ADAPTER (AVIDITY. THE USE OF ANY OTHER CABLE OR AC POWER ADAPTER COULD CAUSE PERMANENT DAMAGE TO THE READER.
4. Use With Computers Attach the reader to your PC using the AVID PC interface / AC Power Adapter Cable (AVIDITY, Figure 4}. Open the PC's serial port using the PC interface parameters as described in section 2.5.4. Read the input as text lines (fine sequential input). All characters displayed on the LCD are also sent to the reader's serial port, through the RS-232 cable printer. 5.