862-01543 link Systems Manual Chapter 4: p Link Management System General information Hardware {supplied by Customer) Issue | The p Link Management Information System is a software tool Tor the management (installation, maintenance and support) of u Link digital radio links The software runs on an IBM compatible PC running Windows 93 (user supplied), connected to the Indoor Unit {TL via a serial communications interface.
pink System Manual Software and The software is the operator Interface to the operation Hardware and control of the u Link System. It allows you to {supplied by perform tasks such as: system configuration, controlling Cellmate) stem parameters and accessing on-line help. It is supplied by Cellmate on oue 1.44 Byte, 3.5 inch stuffy diskette. It is supplied as executable code, supported with installation and other supplementary files.
slink System Mani 862-01545 Suit-down Network Display Menus Area Area Buttons Area Figure 12. kink Management Software: Typical Main Screen.
link Sy Network Display Area ent Manual The Network Display Area of the Main Screen shows all the microwave links in the domain in tabular format. 1t provides the local and remote site station names and shows you the site to which the p Link Management Software is connected. Ta view the details of a particular site, simply click on the required site. The Station Control screen for the selected site is displayed (see Figure 13), Figure 13. Typical Station Control Screen.
unkind System Manual 862-1545 86201545 p Link Systems Manual indoor Unit: This screen allows you to configure the following Indoor Unit: This screen (see Figure 15) allows you to view the Configuration items (see Figure 14) Build State build stage details Wf the primary hardware and Wayside Port & Payload Data Interface Port «Bit Error Rate Thresholds To configure the ports, click on the required parameter(s). Configure the BER thresholds as required.
nubbin System Manual Indoor Unit: Status 862-0545 This serene (see Figure 16) allows you to monitor the network's performance. It provides the following data: o Status of the Near and Far site Fail, Site asd Service alarms. # Saws of the Rx Synge, Tx Synge, LOS and AIS alarm LED. » Payload error cousin for Code Violation, CR, FAS, Instantaneous BER and Maximized BER, » RF error counts for Total Blocks, CRC Count, Instantaneous BER and Maximized BER.