www.avishop.com Tel: 832-831-6180 Support: customerservice@avishop.
4K HDBaseT 4x4 Matrix, HDCP 2.2 compliant Operating Instructions Dear Customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Features HDMI 2.0 version (Support HDMI2.0 4K50/60Hz YUV420). Support high definition resolutions 4K@60, 4K@30, 1080P, 1080i, 720P and standard video format.
Warning To reduce the risk of fire, electric shock or product damage: 1. Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects 6. Clean this apparatus only with dry cloth. filled with liquids, such as vases, shall be placed on the apparatus. 2. Do not install or place this unit 7. Unplug this apparatus in a bookcase, built-in cabinet or during lightning storms or in when unused for long another confined space. Ensure the unit is well ventilated.
TABLE OF CONTENTS Package Contents Panel Descriptions Connecting and Operating Maintenance Product service Warranty Package Contents ① Main unit. (HDBaseT Matrix). ② 12V3A DC Power Supply. x2 ③ 1x Remote controller. ④ 1x IR Extension cable; 4x Wide-Band “IR In” cables; 4x “IR Out” cables. ⑤ Operating Instructions. ⑥ 2x Mounting Ear. Specifications Operating Temperature Range -5 to +35°C(-41 to +95 °F) Operating Humidity Range 5 to 90 % RH (no condensation) Input Video Signal 0.5-1.
Panel Descriptions Front Panel Rear Panel ① Ethernet control. ② RS232 for control. ③ HDMI input port. ④ Output port (HDBaseT output, IR in, RS232, analog audio L/R). ⑤ Main Power. ⑥ POC power input. ⑦ IR ext. ⑧ IR out. Connecting and Operating 1) Connect the HDMI input sources (such as HD-DVD, PS3, STB etc) into HDBaseT Matrix. 2) Connect Cat5e/6 cable to HDBaseT output port of HDBaseT Matrix and HDBaseT input of Receiver.
Typical Application Operation 1. Front panel control. The front panel to select inputs to the various outputs. Change source for output port: Pressing input button of one of the output will change the output source to the selected input.
2. Local IR remote control. User can control the HDMI route of the matrix by using the IR remote. There are four group key pads for four output ports. For each output port source selection, there are 4 number keys and two arrow keys. Press number keys to select specific input port. Left arrow button to backward the input port, and right arrow to forward input port. 3. IR extender control. User can use the IR receiver cable to change the IR receiver position.
4. IR system. The matrix can pass the IR signal through the IR system to the HDMI source or pass the IR signal from the HDMI source to the HDMI sink 1) Control the sources from the sinks Step1: Connect 4pcs “IR Out” cables to “IR Out” ports on the matrix, connect 4pcs “IR In” cables to the “IR In” ports on the receivers.
For example: If you choosed HDMI source1, then just aim the remote control of HDMI source1 to the “IR In” cable which connected to the receiver. 2) Control the sinks from the sources Step1: Connect 4pcs “IR Out” cables to “IR Out” ports on the receivers, connect 4pcs “IR In” cables to the “IR In” ports on the matrix. Step2: Affix the 4xIR emitter of “IR out” cables to the IR window of the 4xHDMI Sink. Step3: Aim the remote of HDMI sink to related IR receiver of HDMI Matrix.
5：1080P_3D_ audio5.1 6：1080P_3D_ audio7.1 7：4K30Hz_3D_2CH(PCM) 8：4K30Hz_3D_ audio5.1 9：4K30Hz_3D_ audio7.1 10：4K60Hz(Y420)_3D_2CH(PCM) 11：4K60Hz(Y420)_3D_ audio5.1 12：4K60Hz(Y420)_3D_ audio71 USER EDID 1 USER EDID 2 USER EDID 3 User EDID can be set via RS232. The EDID data read from one of output port will be saved to USER EDID1. 5.2 Check the “Version Status” 5.
6. Software Control 1). Connects a computer with HDBaseT Matrix by USB to RS232 cable, open the software and click Search Machine. 2). You can control HDBaseT Matrix as following picture showed: 3).
7. IP Control 1). Click “DHCP”, then the switch will assign IP address automatically. You can also set the IP address manually. 2). If you set the static IP, you need set the IP of computer as below.
3). Open web browser, and enter the IP address you set. 4).
5). Set the EDID of 4 HDMI inputs: 6). Network config: 8. Telnet/RS232 Command Control 1). Open CommUart Assistant. 2).
3). Enter Port Command in Send options. 4). If you need check the command, enter “>@ RH” and “enter” key, then click “Send”.
MAINTENANCE Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean this unit. PRODUCT SERVICE （1）Damage requiring service: The unit should be serviced by qualified service personnel if: (a) The DC power supply cord or AC adaptor has been damaged; (b) Objects or liquids have gotten into the unit; (c) The unit has been exposed to rain; (d) The unit does not operate normally or exhibits a marked change in performance; The unit has been dropped or the cabinet damaged.
mail-in your product during the warranty period. This Limited Warranty is extended only to the original purchaser and only covers product purchased as new. A purchase receipt or other proof of original purchase date is required for Limited Warranty service. MAIL-IN SERVICE When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone and/or email address where you can be reached.
A/V Integration, Inc www.avishop.com Tel: 832-831-6180 Support: customerservice@avishop.
