Product Specification Product: Bluetooth 4.1 Module Module Number: Doc Version: AVI1010-B V1.0 Customer: Date: 04.08, 2018 Office Add.
Content Section 1: Overview .......................................................................................................................... 3 1.1 Detailed Specifications .................................................................................................... 3 1.2 Applications ..................................................................................................................... 3 1.3 Features ...........................................................................
AVI1010-B Bluetooth 4.1 Module Section 1: Overview The AVI1010-B module is an RF module built on the CSR1010 chipset, which provides a single-chip solution to controlling all types of lighting and other devices, whether line-connected or battery-powered.Controlling host and radio interfaces, the on-chip microcontroller runs both the Bluetooth Stack and the Bluetooth Mesh Application Stack. The on-chip RF transceiver includes the complete receiver and transmitter functions and support external antenna. 1.
AVI1010-B Bluetooth 4.1 Module 1.3 Features The AVI1010-B module offers the following features: ■ Bluetooth® v4.
AVI1010-B Bluetooth 4.1 Module 1.
AVI1010-B Bluetooth 4.1 Module 1.5 Physical Description Pins Name Function Description 1 WAKE I 2 XTAL_32K_IN Analog in 32.768KHz installed 3 XTAL_32K_OUT Analog in 32.768KHz installed 4 I2C_SCL I/O SPI serial flash installed, or I2C clock Input/output. 5 VBATT Power Power input 6 I2C_SDA I/O SPI serial flash installed, or I2C data Input/output. 7 SPI_PION I SPI serial flash installed, or I2C clock Input/output.
AVI1010-B Bluetooth 4.1 Module Section 2: Supporting Documentations 2.1 Reference Schematic The most recent schematic , bill of material ,and layout file are available from the I TON Technology Corp. Contact your ITON representative for more details. 2.2 Layout Considerations The AVI1010 module is located where the antenna is away from the power supply and any digital signal traces.The antenna keep-out area which is 5mm around the parameter of the module region.
AVI1010-B Bluetooth 4.1 Module 2.4 RF Specification AVI1010-B Module contains an integrated balun which provides a single-ended RF TX / RX IPEX connector. The transmitter has been optimised to deliver power in to a 50Ω load.
AVI1010-B Bluetooth 4.
AVI1010-B Bluetooth 4.
AVI1010-B Bluetooth 4.1 Module Section 6: Packaging Specifications For tape and reel packing and labelling see IC Packing and Labelling Specification . 6.1 Tape Orientation Figure 6.1 shows the AVI1010-B module packing tape orientation. Figure 6.1 :Tape Orientation 6.2 Tape Dimensions Figure 6.1 shows the dimensions of the tape for the AVI1010-B Module . Figure 6.
AVI1010-B Bluetooth 4.1 Module 6.3 Reel Information Figure 6.
AVI1010-B Bluetooth 4.1 Module Section 7: FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
AVI1010-B Bluetooth 4.1 Module or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.
AVI1010-B Bluetooth 4.1 Module Section 8: Canada Statement This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: - This device may not cause interference; and - This device must accept any interference, including interference that may cause undesired operation of the device. Le présentappareilestconforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
AVI1010-B Bluetooth 4.1 Module The transmitter module may not be co-located with any other transmitter or antenna. As long as the condition above is met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed.
AVI1010-B Bluetooth 4.1 Module how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information à l'utilisateur final L'intégrateur OEM doitêtreconscient de ne pas fournir des informations à l'utilisateur final quant à la façnd'installerou de supprimerce module RF dans le manuel de l'utilisateur du produit final qui intègrece module.
AVI1010-B Bluetooth 4.1 Module obtaining a separate FCC authorization. Any company of the host device which install this modular with limit modular approval should perform the test of radiated emission and spurious emission according to FCC part 15C:15.247 and 15.209 requirement, only if the test result comply with FCC part 15.247 and 15.209 requirement, then the host can be sold legally.
AVI1010-B Bluetooth 4.1 Module Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne. Tant que les 1 condition ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront pas nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé.
