FAQ's

AVF Standing Wall Mount- FAQ’s
Q
Is this product free standing?
A
No, this product is designed to be stood against a wall.
Q
Do I have to put furniture in front of it?
A
It’s up to you, the product can be stood alone against a wall, or with low
level furniture placed in front of it.
Q
What if my furniture has a flat base?
A
Your furniture will need to be on casters or have short legs that provide a
minimum clearance of 1
3
/
4
inches (4.5cm) from the floor, for the base of
the FL601LTW-A to fit beneath.
Q
I don’t have to drill the wall?
A
You don’t have to drill the wall, we provide a single wall anchor screw
similar to what you might use with a bookcase or any other wall
furniture, this is recommended, but optional.
Q
How long will it take to build and install?
A
It depends how handy you are. It’s a lot easier than installing a regular
wall mount because you don’t have to spend time preparing the wall. We
would expect someone with average home improvement skills to have
this built in around 30 to 40 minutes.
Q
Will I be able to set it up on my own?
A
Most of the build can be done by just one person. We recommend a two
person lift when hooking your TV on to the mount, especially for screens
40 inches and above.
Q
Can I run cables behind the column?
A
Yes, cables can be hidden behind the centre of the column and are held
in place with clips to keep everything nice and tidy (see section 7 of the
instruction booklet).
Q
What if my screen isn’t level?
A
Due to uneven floors or walls, your TV may need a little fine tuning once
in place. There are two leveling screws at the top of the mount, these can
easily be adjusted to perfect your screen position (see section 9 of the
instruction booklet).