Installation Manual

ManualsBrandsAvery Dennison Retail Information Services ManualsElectronicsUHF RFID Module

Table Of Contents

Regulatory Compliance information
- Product Labeling
- Product Manuals

REGULATORY COMPLIANCE INFORMATION

The RS-500 (Impinj model number IPJ-RS500-GX) is approved for modular certification by FCC

and Industry Canada (IC) under the following ID numbers:

FCC ID: GU6-RS500GX

IC: 1502A-RS500GX

Modular approval allows installation in different end-use products by an original equipment

manufacturer (OEM) with limited or no additional testing or equipment authorization for the

transmitter function provided by the RS500.

In addition, the end product must comply with all applicable FCC equipment authorizations,

regulations, requirements and equipment functions not associated with the RS500. For example,

compliance must be demonstrated to regulations for other transmitter components within the

host product, to requirements for unintentional radiators (Part 15B), and to additional

authorization requirements for the non-transmitter functions.

The OEM applying the RS500 is required to include all FCC and/or IC statements and warnings

detailed in the following sections to the end product labeling (where specified) and in the

finished product manual. The OEM must also strictly adhere to antenna and installation

guidelines and MPE restrictions stated in this document.

Product Labeling

A statement must be included on the exterior of the final OEM product which communicates that

the device identified by the aforementioned FCC

and Industry Canada ID numbers are contained

within the product. For example:

This product contains a radio module certified as

FCC ID: GU6-RS500GX and

IC: 1502A-RS500GX

Contains FCC ID: GU6-RS500GX

Contains IC: 1502A-RS500GX

The OEM must include the following statements

on the exterior of the finished product unless the

product is too small (e.g. less than 4 x 4 inches):

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including any interference that may cause undesired operation.

DRAFT

Summary of content (4 pages)

PAGE 1
R E G U L AT O R Y C O M P L I A N C E I N F O R M AT I O N The RS-500 (Impinj model number IPJ-RS500-GX) is approved for modular certification by FCC and Industry Canada (IC) under the following ID numbers: FCC ID: GU6-RS500GX IC: 1502A-RS500GX Modular approval allows installation in different end-use products by an original equipment manufacturer (OEM) with limited or no additional testing or equipment authorization for the transmitter function provided by the RS500.
PAGE 2
Product Manuals US Requirements The finished product manual must contain the following statement: WARNING: The Federal Communications Commission warns that changes or modifications of the radio module within this device not expressly approved by the manucaturer could void the user’s authority to operate the equipment.
PAGE 3
Canadian Requirements The OEM must include the following regulatory statements (shown in italics) in both English and French on the exterior of the finished product and/or in the product manual: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
PAGE 4
Antenna Requirements In order to operate the RS500 under either GU6-RS500GX or IC: 1502A-RS500GX, the OEM must strictly follow these antenna guidelines: The OEM may operate only with the following antenna or antenna types with maximum gain as shown: ♦ Impinj, Inc.