Quick Start Guide

ManualsBrandsAvery Dennison Retail Information Services ManualsComputers & AccessoriesThermal Printer

GoLabel is a wireless label printer designed to

work with a tablet running GoOps or SubOps.

GoLabel simpliﬁes your food prepping and

labeling procedures. This Quick Start Guide will

help you familiarize yourself with GoLabel

before you get started.

The Smart Way to Manage

Your Restaurant Operations

(888) 636-7557

support@zippyyum.com

www.zippyyum.com

Watch our “Quick Start” video by

scanning the QR code or visiting

www.zippyyum.com/golabelsetup

SKIP THE GUIDE AND WATCH OUR “QUICK START” VIDEO!

Thermal Printer

Summary of content (7 pages)

PAGE 1
The Smart Way to Manage Your Restaurant Operations Thermal Printer GoLabel is a wireless label printer designed to work with a tablet running GoOps or SubOps. GoLabel simplifies your food prepping and labeling procedures. This Quick Start Guide will help you familiarize yourself with GoLabel before you get started. SKIP THE GUIDE AND WATCH OUR “QUICK START” VIDEO! Watch our “Quick Start” video by scanning the QR code or visiting www.zippyyum.com/golabelsetup (888) 636-7557 support@zippyyum.com www.
PAGE 2
SETUP 1 Open GoLabel’s cover and remove any packaging material and the labels from inside. If the first label has tape on it, remove the tape. 3 Push the roll of labels to the left so the left side of the roll is flush with the left side of the printer. 2 Place the roll of labels directly into the printer so the labels feed from the top. 4 Feed the first label through the label feed guides, making sure the labels are aligned on the left side of the printer.
PAGE 3
SETUP 5 If the label is loose in the feed guides, ensure the label feed guides are adjusted to the width of the label by moving the right guide, keeping the left edge of the labels aligned with the left side of the printer. 7 Download and install the GoOps or SubOps app on a compatible tablet. 6 Feed the first label through so it is slightly sticking out of the printer. Then close, plug in, and turn on your GoLabel.
PAGE 4
GETTING TO KNOW YOUR GOLABEL HARDWARE 1 Cover Release Button 2 Connection Indicator 3 Error Indicator 4 Pause Button 5 Feed Button 6 Power Button 7 Label Roll Bucket 8 Left Feed Guide 9 Right Feed Guide 5 4 2 3 1 7 8 9 6
PAGE 5
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 6
ISED Statement: ‐ English: This device complies with Industry Canada license‐exempt RSS standard (s).Operation is subject to the following two conditions: (1) This device may not cause interference, a nd (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B). ‐ French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
PAGE 7
PRINTING LABELS The number on the printer shows how many labels will be printed. After printing a label(s), the number will turn grey and reset to 1.