Instruction Manual
TC6059RCD Rev AA 6/19 Classification: Avery Dennison - Public ©2018 Avery Dennison Corp. All Rights Reserved.
REGULATORY COMPLIANCE INFORMATION
This document is for the Avery Dennison® Pathfinder® 6059 Printer.
Avery Dennison products are designed to be compliant with the rules and regulations
in the locations into which they are sold and will be labeled as required. Any changes or
modifications to Avery Dennison equipment not expressly approved by Avery Dennison could
void the user authority to operate the equipment.
FCC Regulations – Class B
This device has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of the Federal Communications Commissions Rules and Regulation. These
limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be
responsible for correction. However, there is no guarantee that interference will not occur in a
particular installation.
If the equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that which the receiver is
connected.
This Class B digital apparatus meets the requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le
Matériel Brouilleur du Canada.
FCC Regulations – Class B (with Optional Radio)
CAUTION： Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
IMPORTANT NOTICE: FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
This transmitter is restricted to indoor use only within the 2.400 – 2.500 GHz (b/g/n) and
4.915 – 5.825 GHz (a/n/ac) bands.
EN
Caution:
This 802.11 a/b/g/n/ac WLAN plus Bluetooth 4.2 dual mode printer is approved for
use in all EU and EFTA countries. For more information, refer to the printer’s
Declaration of Conformity.